Central Pneumatic 95504 is a 4-inch air angle grinder with a maximum speed of 10,000 RPM and an air consumption of 6 SCFM at 90 PSI. It has a 1/4-inch NPT female thread inlet and a 5/8-inch arbor diameter. It can be used with grinding wheels, flap wheels, wire brushes, and wire wheel brushes. It is important to use the correct arbor size and to make sure that the accessories are tightened down securely. The grinder should be used with an approved and proper guard.
Central Pneumatic 95504 is a 4-inch air angle grinder with a maximum speed of 10,000 RPM and an air consumption of 6 SCFM at 90 PSI. It has a 1/4-inch NPT female thread inlet and a 5/8-inch arbor diameter. It can be used with grinding wheels, flap wheels, wire brushes, and wire wheel brushes. It is important to use the correct arbor size and to make sure that the accessories are tightened down securely. The grinder should be used with an approved and proper guard.
Central Pneumatic 95504 is a 4-inch air angle grinder with a maximum speed of 10,000 RPM and an air consumption of 6 SCFM at 90 PSI. It has a 1/4-inch NPT female thread inlet and a 5/8-inch arbor diameter. It can be used with grinding wheels, flap wheels, wire brushes, and wire wheel brushes. It is important to use the correct arbor size and to make sure that the accessories are tightened down securely. The grinder should be used with an approved and proper guard.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI