Triton Systems RL5000 Xscale Series Owner's manual

Type
Owner's manual

Triton Systems RL5000 Xscale Series offers advanced features to enhance the security of your ATM. It includes a vault door sensor that triggers an alarm if the vault door is opened without authorization, ensuring the protection of your valuable assets. The Xscale Series also provides connectivity to the door plunger switch, allowing for additional security measures and remote monitoring capabilities. With its reliable performance and robust design, the RL5000 Xscale Series safeguards your ATM against unauthorized access and potential threats.

Triton Systems RL5000 Xscale Series offers advanced features to enhance the security of your ATM. It includes a vault door sensor that triggers an alarm if the vault door is opened without authorization, ensuring the protection of your valuable assets. The Xscale Series also provides connectivity to the door plunger switch, allowing for additional security measures and remote monitoring capabilities. With its reliable performance and robust design, the RL5000 Xscale Series safeguards your ATM against unauthorized access and potential threats.

VAULT DOOR SENSOR INSTALLATION
(MODEL RL5000 X-SCALE)
TDN 07102-00002 May 23 2008
COPYRIGHT NOTICE
© 2005 Delaware Capital Formation,Inc. All Rights Reserved. TRITON, TRITON WHERE MONEY
COMES FROM, TRITON WAVES, DOVER and the DOVER logo are registered trademarks of
Delaware Capital Formation, Inc., a wholly-owned subsidiary of Dover Corporation.
CORPORATE HEADQUARTERS: RMA (RETURN MATERIAL AUTHORIZATION)
RETURN A DDRESS:
522 E. Railroad Street 21405 Avenue “B”
Long Beach, MS 39560 Long Beach, MS 39560
Phone: (228) 868-1317
Fax: (228) 868-0437
2
PURPOSE
This guide covers the steps for installing a door sensor in the Model RL5000 X-Scale ATM. This procedure includes a list of all
tools and hardware necessary for the upgrade as well as the steps involved.
Kits are only available for the following cabinet designs:
¾¾
¾¾
¾ Business Hours units manufactured after serial number LRL5115042991411
¾¾
¾¾
¾ Level 1 (Safe) units manufactured after serial number LRL5125042941423
SCOPE
This procedure applies to all service personnel involved in the process of maintaining or converting Triton ATMs.
BUSINESS HOURS UPGRADE KIT
LEVEL 1 (SAFE) UPGRADE KIT
DOOR SENSOR INSTALLATION
DERIUQERSLOOT
srettuClanogaiDrevirdwercSspillihP
)0005LR(TIKEDARGPUROSNESROOD
)84060-00260N/P(SRUOHSSENISUB
DEILPPUSSTRAP
REBMUNTRAP NOITPIRCSED YTITNAUQ
90700-02190hctiwSytefaS,elbaC1
03000-05010nI-panS,epyTregnulP,hctiwS1
27700-11030rosneStenibaC,tekcarB1
11100-45020daeHspillihPknusretnuoC"2/1,23-8#,wercS2
20000-27020ssenraHeriW,pilC2
40000-13020rehsaWhtooT.txE/wtuNxeH,23-8#,tuN1
84000-45020daeHspillihPssurT"8/3,23-8#,wercS1
51000-27030parWyT5
20000-20170)0005LR(noitallatsnIrosneSrooDtluaV1
-----------erawtfoSdetroppuS1
DERIUQERSLOOT
srettuClanogaiDrevirdwercSspillihP
)0005LR(TIKEDARGPUROSNESROOD
)79100-00260N/P(TLUAV-1LEVEL
DEILPPUSSTRAP
REBMUNTRAP NOITPIRCSED YTITNAUQ
90700-02190hctiwSytefaS,elbaC1
03000-05010nI-panS,epyTregnulP,hctiwS1
44900-11030)tluaV(rosneStenibaC,tekcarB1
15000-45020rehsaWenoC/wdaeHspillihPnaP"61/5,23-8#,wercS2
51000-27030parWyT5
20000-20170)0005LR(noitallatsnIrosneSrooDtluaV1
-----------erawtfoSdetroppuS1
3
Docking Board/Printer Presenter Connections/Cable Routing
NC
Disconnect and remove
Presenter to Docking board cable
NO
(Not used)
Safe NC
COM
BUSINESS HOURS CABINET
Connect door sensor cable to
Presenter and Docking board
Route/secure cable
4
LEVEL 1 (SAFE) CABINET
Docking Board/Printer Presenter Connections/Cable Routing
Disconnect and remove
Presenter to Docking board cable
Connect door sensor cable to
Presenter and Docking board
CONNECTIVITY TO DOOR SWITCH
The cable connections for the vault plunger
switch are the same as the business hours.
See previous page/illustrations for cable
connectivity.
Route/secure cable
Ty wrap excess cable
length where applicable
1
TDN 07102-00002
* CHANGE PAGE *
PAGE 2 (UNDER “PURPOSE”): IN FIRST SENTENCE ADDAND X2” AFTER “MODEL RL5000
X-S
CALE....”.
May 23, 2008
DERIUQERSLOOT
srettuClanogaiDrevirdwercSspillihP
)ELACS-X(TIKEDARGPUROSNESROOD0005LR
95180-00260N/P
DEILPPUSSTRAP
REBMUNTRAP NOITPIRCSED YTITNAUQ
90700-02190hctiwSytefaS,elbaC1
03000-05010nI-panS,epyTregnulP,hctiwS1
61125-11030)srHssenisuB(rosneStenibaC,tekcarB1
18100-45020)srH.suB(daeHspillihPknusretnuoC"2/1,wercS2
71125-11030)tluaV-1lvL(rosneStenibaC,tekcarB1
07100-45020)tluaV(rehsaw/wdaeHspillihP"61/5,wercS2
83000-27030esaelerkciuQ,ni-wercsdniuoR,pilCelbaC2
42000-10320rehsaWhtooT.txE/w,23-8#,tuN1
86100-45020daeHspillihPssurT"8/3,23-8#,wercS1
51000-27030parWyT5
20000-20170ediuGnoitallatsnIrosneSrooDtluaV1
egaP"egnahC"1
PAGE 2: DELETE “LEVEL 1
(SAFE) UPGRADE KITLINE AND THE
TABLE
BELOW IT. REPLACE WITH
“RL5000 X2 UPGRADE KITAND
TABLE
SHOWN AT RIGHT.
DERIUQERSLOOT
srettuClanogaiDrevirdwercSspillihP
)2X(TIKEDARGPUROSNESROOD0005LR
06180-00260N/P
DEILPPUSSTRAP
REBMUNTRAP NOITPIRCSED YTITNAUQ
67070-02190hctiwSytefaS,elbaC1
03000-05010nI-panS,epyTregnulP,hctiwS1
61125-11030)srHssenisuB(rosneStenibaC,tekcarB1
18100-45020)srH.suB(daeHspillihPknusretnuoC"2/1,wercS2
71125-11030)tluaV-1lvL(rosneStenibaC,tekcarB1
07100-45020)tluaV(rehsaw/wdaeHspillihP"61/5,wercS2
83000-27030esaelerkciuQ,ni-wercsdniuoR,pilCelbaC2
42000-10320rehsaWhtooT.txE/w,23-8#,tuN1
86100-45020daeHspillihPssurT"8/3,23-8#,wercS1
20000-27030citsalP,ni-panS,pilC2
51000-27030parWyT5
20000-20170ediuGnoitallatsnIrosneSrooDtluaV1
egaP"egnahC"1
PAGE 2: DELETE “BUSINESS
HOURS UPGRADE KITLINE AND THE
TABLE
BELOW IT. REPLACE WITH
“RL5000 X-SCALE UPGRADE KIT
AND TABLE SHOWN AT RIGHT.
2
TDN 07102-00002
PAGE 3 AND 4: MOST P/NS IN DRAWING(S) HAVE CHANGED. REFERENCE TABLES ON FRONT
PAGE
OF THIS “CHANGEPAGE. ALSO, PICTURES SHOW CONNECTIVITY FOR “X-SCALE UNITS/
CABINETS -THIS IS STILL CORRECT.
Connect door sensor cable (P/N 09120-
07076) to X2 Docking board (J21)
X2 Docking Board Reference
PAGE 3 AND 4: ADD PICTURES BELOW TO SHOW CONNECTIVITY FOR “X2” EQUIPPED UNITS.
NOTE: Connectivity to the Door plunger switch remain the same.
PAGE 3: PLUNGER/BRACKET MOUNT THE SAME SHOWN FOR X-SCALE AND X2 EQUIPPED UNITS
FOR
BUSINESS HOURS CABINET.
P
AGE 4: PLUNGER/BRACKET MOUNTS THE SAME SHOWN FOR “X-SCALEEQUIPPED LVL 1
CABINETS. FOR “X2” EQUIPPED LVL 1 CABINETS, PLUNGER/BRACKET/CABLE ROUTING MOUNT AS SHOWN
IN
FIGURE BELOW.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Triton Systems RL5000 Xscale Series Owner's manual

Type
Owner's manual

Triton Systems RL5000 Xscale Series offers advanced features to enhance the security of your ATM. It includes a vault door sensor that triggers an alarm if the vault door is opened without authorization, ensuring the protection of your valuable assets. The Xscale Series also provides connectivity to the door plunger switch, allowing for additional security measures and remote monitoring capabilities. With its reliable performance and robust design, the RL5000 Xscale Series safeguards your ATM against unauthorized access and potential threats.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI