TQB0E2384U
Operating Instructions
LCD Television
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this product and
retain them for future reference.
The images shown in this manual are for illustrative purposes only.
For more detailed instructions, refer to [eHELP]
(Built-in Operating Instructions).
●
How to use [eHELP] (p. 14)
Contents
Be Sure to Read
Important Notice········································· 2
Safety Precautions ·····································2
Quick Start Guide
Accessories ·············································· 5
Connections ·············································· 6
Identifying Controls ··································· 10
First time Auto Setup ································· 12
Using your VIERA
Operations ·············································· 13
How to Use eHELP ··································· 14
Others
FAQs ····················································· 14
Maintenance ··········································· 15
Specifications ·········································· 16
English
Model No.
TX-L32BL6B
TX-L39BL6B
TX-L50BL6B
2
Important Notice
Notice for DVB / Data broadcasting /
IPTV functions
This TV is designed to meet the standards (as of
August, 2012) of digital services.
●
Not all the features are available depending on the
country, area, broadcaster, service provider and
network environment.
●
The compatibility with future services is not
guaranteed.
●
Check the latest information on the available
services at the following website.
http://panasonic.net/viera/support
Panasonic does not guarantee operation and
performance of peripheral devices made by other
manufacturers; and we disclaim any liability or damage
arising from operation and/or performance from usage
of such other maker’s peripheral devices.
This product is licensed under the AVC patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the
AVC Standard (“AVC Video”) and/or (ii) decode AVC
Video that was encoded by a consumer engaged in
a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide
AVC Video. No license is granted or shall be implied
for any other use.
Additional information may be obtained from MPEG
LA, LLC.
See http://www.mpegla.com.
Rovi Corporation and/or its subsidiaries and related
affiliates are not in any way liable for the accuracy
or availability of the program schedule information
or other data in the Rovi Guide system and cannot
guarantee service availability in your area. In no event
shall Rovi Corporation and/or its related affiliates be
liable for any damages in connection with the accuracy
or availability of the program schedule information or
other data in the Rovi Guide system.
Transport only in upright position
Safety Precautions
To help avoid risk of electrical shock, fire, damage or
injury, please follow the warnings and cautions below:
■ Mains plug and lead
Warning
If you detect anything unusual,
immediately switch off the mains
supply switch and remove the
mains plug.
●
This TV is designed to operate on AC 220-240 V, 50 /
60 Hz.
●
Insert the mains plug fully into the socket outlet.
●
Ensure that the mains plug is easily accessible.
●
Disconnect the mains plug when cleaning the TV.
●
For the information of the trademarks, refer to [eHELP]
(Support > Licence).
3
■ Take care
Warning
●
Do not remove covers and never
modify the TV yourself as live
parts are accessible when they
are removed. There are no user
serviceable parts inside.
●
Do not expose the TV to rain
or excessive moisture. This TV
must not be exposed to dripping
or splashing water and objects
filled with liquid, such as vases,
must not be placed on top of or
above the TV.
●
Do not insert foreign objects into the TV through the air
vents.
●
Do not use an unapproved pedestal / mounting
equipment. Be sure to ask your local Panasonic dealer
to perform the setup or installation of approved wall-
hanging brackets.
●
Do not apply strong force or impact to the display panel.
●
Do not place the TV on sloped
or unstable surfaces, and ensure
that the TV does not hang over
the edge of the base.
●
This TV is designed for table-top use.
●
Do not expose the TV to direct
sunlight and other sources of
heat.
To prevent the
spread of fire, keep
candles or other
open flames away
from this product at
all times
■ Dangerous part / Small object
Warning
●
This product contains possibly dangerous parts such
as plastic bags, that can be breathed in or swallowed
by young children accidentally. Keep these parts out of
reach of young children.
■ Pedestal
Warning
●
Do not disassemble or modify the pedestal.
Caution
●
Do not use any pedestal other than the one provided
with this TV.
●
Do not use the pedestal if it becomes warped or
physically damaged. If this occurs, contact your nearest
Panasonic dealer immediately.
●
During setup, make sure that all screws are securely
tightened.
●
Ensure that the TV does not suffer any impact during
installation of the pedestal.
●
Ensure that children do not climb onto the pedestal.
●
Install or remove the TV from the pedestal with at least
two people.
●
Install or remove the TV by the specified procedure.
●
Do not touch the mains plug with wet
hands.
●
Do not damage the mains lead.
•
Do not place a heavy object
on the lead.
•
Do not place the lead near a
high temperature object.
•
Do not pull on the lead. Hold
onto the mains plug body
when disconnecting the plug.
•
Do not move the TV with the lead plugged into a
socket outlet.
•
Do not twist the lead, bend it excessively or stretch it.
•
Do not use a damaged mains plug or socket outlet.
•
Ensure the TV does not crush the mains lead.
●
Do not use any mains lead other than that provided with
this TV.
IMPORTANT:
THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE
FOLLOWING TEXT CAREFULLY.
This TV is supplied with a moulded 3-pin mains plug
for your safety and convenience.
A 5 amp fuse is fitted in this mains plug. Shall the
fuse need to be replaced, please ensure that the
replacement fuse has a 5 amp rating and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark
or the BSI mark on
the fuse body.
If the mains plug contains a removable fuse cover,
you must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover, the mains plug must not be
used until a replacement cover is obtained.
A replacement fuse cover may be purchased from
your local dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the
one supplied with this TV.
The supplied mains lead and moulded plug are
designed to be used with this TV to avoid interference
and for your safety.
If the socket outlet in your home is not suitable, get it
changed by a qualified electrician.
If the plug or mains lead becomes damaged,
purchase a replacement from an authorised dealer.
How to replace the fuse:
Example 1
Example 2
For plug type shown in example 1
Lift out the removable fuse cover
with a screwdriver and replace the
fuse, then refit it securely into the
mains plug.
For plug type shown in example 2
Lift open the fuse cover in the mains
plug with a screwdriver and replace
the fuse, then press the fuse cover
down securely.
4
■ Radio wave
Warning
●
Do not use the TV in any medical institutions or
locations with medical equipment. Radio waves may
interfere with the medical equipment and cause
accidents due to the malfunction.
●
Do not use the TV near any automatic control
equipment such as automatic doors or fire alarms.
Radio waves may interfere with the automatic control
equipment and cause accidents due to the malfunction.
●
Keep the distance at least 22 cm from the TV when you
have a cardiac pacemaker. Radio waves may interfere
with the operation of the pacemaker.
●
Do not disassemble or alter the TV in any way.
■ Built-in wireless LAN
Caution
●
Do not use the built-in wireless LAN to connect to any
wireless network (SSID
*
) for which you do not have
usage rights. Such networks may be listed as a result
of searches. However, using them may be regarded as
illegal access.
*
SSID is a name for identifying a particular wireless
network for transmission.
●
Do not subject the built-in wireless LAN to high
temperatures, direct sunlight or moisture.
●
Data transmitted and received over radio waves may be
intercepted and monitored.
●
The built-in wireless LAN uses 2.4 GHz and 5 GHz
frequency bands. To avoid malfunctions or slow
response caused by radio wave interference, keep the
TV away from the devices such as other wireless LAN
devices, microwaves, mobile phones and the devices
that use 2.4 GHz and 5 GHz signals when using the
built-in wireless LAN.
●
When noises occur due to the static electricity, etc.,
the TV might stop operating for the protection of the
devices. In this case, turn the TV off with Mains power
On / Off switch, then turn it on again.
●
Additional information for the wireless LAN and access
point may be on the following website.
http://panasonic.net/viera/support
■ Ventilation
Caution
Allow sufficient space around the TV in order to help
prevent excessive heat, which could lead to early failure
of some electronic components.
Minimum distance:
(cm)
10
10
10
10
●
Ventilation should not be
impeded by covering the
ventilation openings with items
such as newspapers, tablecloths
and curtains.
●
Whether you are using a pedestal or not, always ensure
the vents at the bottom of the TV are not blocked and
there is sufficient space to enable adequate ventilation.
■ Moving the TV
Caution
Before moving the TV, disconnect all cables.
●
Move the TV with at least two
people. Support as shown to
avoid injury by the TV tipping
or falling.
■ When not in use for a long time
Caution
This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected to a
live socket outlet.
●
Remove the mains plug from the wall socket when the
TV is not in use for a prolonged period of time.
■ Excessive volume
Caution
●
Do not expose your ears to
excessive volume from the
headphones. Irreversible
damage can be caused.
●
If you hear a drumming noise in your ears, turn down
the volume or temporarily stop using the headphones.
■ Battery for the Remote Control
Caution
●
Incorrect installation may cause battery leakage,
corrosion and explosion.
●
Replace only with the same or equivalent type.
●
Do not mix old and new batteries.
●
Do not mix different battery types (such as alkaline and
manganese batteries).
●
Do not use rechargeable batteries (Ni-Cd, etc.).
●
Do not burn or break up batteries.
●
Do not expose batteries to excessive heat such as
sunshine, fire or the like.
●
Make sure you dispose of batteries correctly.
5
Accessories
Remote Control
(p. 10)
●
N2QAYB000830
Batteries (2)
●
R6
(p. 10)
Pedestal
(see below)
Mains lead
(p. 6)
Operating Instructions
Production Registration Leaflet
●
Accessories may not be placed all together. Take care not to throw them away unintentionally.
●
For the information of optional accessories, refer to [eHELP] (Support > Optional accessories).
Assembling / Removing the pedestal
Assembly screw (4)
M5 × 15
Bracket
Assembly screw (4)
M4 × 12
Base
■ Assembling the pedestal
1
A
C
D
B
2
3
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screws from the bracket.
6
Connections
●
External equipment and cables shown are not supplied with this TV.
●
Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
●
Check the type of terminals and cable plugs are correct when connecting.
●
Always use a fully wired SCART or HDMI cable.
●
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
●
Also read the manual of the equipment being connected.
Terminals
8
7
9
4
6
5
2
1
3
1
CI slot (p. 9)
2
Headphone jack (p. 8)
3
USB 1 - 2 port
4
HDMI1 - 3 (p. 7, 8)
5
DIGITAL AUDIO
6
Terrestrial terminal
(see below)
7
AV2 (COMPONENT / VIDEO)
(p. 8)
8
AV1 (SCART) (p. 7)
9
ETHERNET (p. 7)
Basic connections
Mains lead and aerial
■ DVB, Analogue
AC 220-240 V
50 / 60 Hz
Mains lead
(supplied)
Terrestrial aerial
RF cable
■ Mains lead
Insert the mains plug firmly into place.
●
When disconnecting the mains lead, be absolutely sure to
disconnect the mains plug at the socket outlet first.
7
AV devices
■ DVD Recorder / VCR
TV
DVD Recorder / VCR
SCART cable
RF cable
Terrestrial aerial
RF cable
■ DVD Recorder / VCR and Satellite receiver
TV
Satellite receiver
HDMI cable
SCART cable
SCART
cable
DVD Recorder / VCR
RF cable
RF
Cable
RF Cable
Terrestrial aerial
Network
●
To enable the network service functions, you need to connect the TV to a broadband network environment. If you do
not have any broadband network services, please consult your retailer for assistance.
●
Prepare the internet environment for wired connection or wireless connection.
●
Setup of the network connection will start when first using the TV. (p. 12)
■ Wired connection
TV
Internet environment
LAN cable (Shielded)
●
Use the Shielded Twist Pair (STP) LAN cable.
■ Wireless connection
Internet environment
Access point
Built-in wireless LAN
8
Other connections
■ DVD player
(COMPONENT equipment)
TV
DVD Player
(Listening)
(Viewing)
■ Camcorder / Game equipment
(VIDEO equipment)
TV
(Viewing)
(Listening)
Camcorder
Game equipment
■ Amplifier (to listen with speakers)
TV
HDMI cable
Amplifier with
speaker system
External equipment
(DVD Player, etc.)
●
Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio
Return Channel) function.
As for an amplifier without ARC function, use DIGITAL AUDIO.
●
To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the
equipment to the amplifier. For the connections, read the manuals of the equipment and amplifier.
■ Headphones
(M3 stereo mini plug)
●
To adjust volume
[Headphone Volume] in the
Sound Menu
TV
9
■ Common Interface
TV
CI module
●
If a smart card and a CI module come as a set, first insert the CI
module, then insert the smart card into the CI module.
●
Insert the module in the correct direction.
●
Normally encrypted channels will appear. (The viewable channels
and its features depend on the CI module.)
If encrypted channel does not appear [Common Interface] in
[System Menu] (Setup Menu)
●
There might be some CI modules in the market with older firmware
versions that do not work fully interoperable with this new CI+ v1.3
TV. In this case, please contact your content provider.
●
For more information, refer to [eHELP] (Functions > Common
Interface), read the manual of the CI module, or check with the
content provider.
Types of connectable equipment to each terminal
Features
Terminal
AV1
AV2
DIGITAL
AUDIO
ETHERNET
HDMI 1 - 3
USB 1 - 2
COMPONENT VIDEO
To record / play back videocassettes / DVDs
(VCR / DVD Recorder)
To watch satellite broadcasts (Set top box)
To watch DVDs (DVD Player)
To watch camcorder images (Video camera)
To play games (Game equipment)
To use amplifier with speaker system
*
1
To use network services
*
2
VIERA Link
: Recommended Connection
*
1: Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio
Return Channel) function.
*
2: Use USB 1 port for connecting the Communication Camera.
1
14
15
18
20
21
22
23
16
24
2
4
5
6
19
10
3
17
7
8
9
11
12
13
10
Identifying Controls
Remote Control
1
Standby On / Off switch
2
Off Timer
●
Sets the time for the TV to automatically turn off.
3
[Main Menu]
●
Press to access Picture, Sound, Network, Timer,
Setup and Help Menus.
4
Text service button
5
Information
●
Displays channel and programme information.
6
APPS
●
Displays [APPS List] (applications list).
7
OK
●
Confirms selections and choices.
●
Press after selecting channel positions to quickly
change channel.
8
[Option Menu]
●
Easy optional setting for viewing, sound, etc.
9
Coloured buttons
(red-green-yellow-blue)
●
Used for the selection, navigation and operation of
various functions.
10
Volume Up / Down
11
Numeric buttons
●
Changes channel and teletext pages.
●
Sets characters.
●
When in Standby mode, switches TV on.
12
[eHELP]
●
Displays [eHELP] (Built-in Operating Instructions).
13
Input mode selection
●
TV - switches to DVB / Analogue mode.
●
AV - switches to AV input mode from Input
Selection list.
14
Aspect
●
Changes aspect ratio.
15
Subtitles
●
Displays subtitles.
16
Exit
●
Returns to [Home Screen].
17
HOME
●
Displays [Home Screen].
18
TV Guide
●
Displays Electronic Programme Guide.
19
Cursor buttons
●
Makes selections and adjustments.
20
Return
●
Returns to the previous menu / page.
21
Channel Up / Down
22
Sound Mute On / Off
23
Last view
●
Switches to previously viewed channel or input
mode.
24
Operations for contents, connected equipment,
etc.
■ Installing / Removing batteries
Pull open
Hook
Note the correct polarity
(+ or -)
Close
11
Indicator / Control panel
●
When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to
highlight the pressed button.
Using the On Screen Displays - Operation guide
Many features available on this TV can be accessed via the On Screen Display menu.
■ Operation guide
Operation guide will help your operation by using the
remote control.
Example: [Sound Menu]
1/2
0
0
0
11
0
Mode
Standard
Bass
Treble
Equaliser
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to Wall
Off
Off
Over 30cm
Main Menu
Picture
Sound
Network
Timer
Setup
Select
Selects your favourite sound
mode.
Page up
Change
RETURN
Page down
Operation guide
S
elec
t
S
elects
y
our
f
avourite sound
mode
.
Pa
g
eu
p
C
han
ge
R
ET
U
R
N
Page
dow
n
Balance
Help
■ How to use remote control
Open the main menu
Move the cursor / select from a range of options /
select the menu item (up and down only) / adjust
levels (left and right only)
Access the menu / store settings after adjustments
have been made or options have been set
Return to the previous menu
Exit the menu system and return to [Home Screen]
1
Input mode selection
●
Press repeatedly until you reach the desired
mode.
[Main Menu]
●
Press and hold for about 3 seconds to display
main menu.
OK (when in the menu system)
2
Channel Up / Down
Cursor Up / Down (when in the menu system)
3
Volume Up / Down
Cursor Left / Right (when in the menu system)
4
Mains power On / Off switch
●
Use to switch the mains power.
5
Remote control signal receiver
●
Do not place any objects between the TV remote
control signal receiver and remote control.
6
Ambient sensor
●
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture Menu is set to
[On].
7
Power LED
Red: Standby
Green: On
●
The LED blinks when the TV receives a command
from the remote control.
Rear side of the TV
3
1
4
2
5 6 7
12
First time Auto Setup
Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.
●
These steps are not necessary if the setup has been completed by your local dealer.
●
Please complete connections (p. 6 - 9) and settings (if necessary) of the connected equipment before starting Auto
Setup. For details of settings for the connected equipment, read the manual of the equipment.
1
Plug the TV into mains socket and turn power on
●
Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
Select [Home]
Select [Home] viewing environment to use in your home environment.
●
[Shop] is for shop display.
●
To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.
Set up the network connection
Select your country
Select your region
3
Select the type of [Home Screen]
The demonstration to explain how to use [my Home Screen] is displayed. Confirm the demonstration by
following the on-screen instructions, and then select the desired [Home Screen].
Example: [Home Screen Selection] Example: [TV Home Screen]
●
[my Home Screen] is the start-up screen when the TV is turned on or the HOME button is pressed.
Auto Setup is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the network, RF cable, and then follow the on-screen instructions.
Note
●
The TV will automatically go into Standby mode when no operation is performed for 4 hours if [Auto Standby] in the
Timer Menu is set to [On].
●
The TV will automatically go into Standby mode when no signal is received and no operation is performed for
10 minutes if [No signal Power off] in the Timer Menu is set to [On].
●
To retune all channels [Auto Setup] in [Tuning Menu] (Setup Menu)
●
To initialise all settings [Shipping Condition] in [System Menu] (Setup Menu)
13
Operations
Turn power on
(TV)
or
●
Mains power On / Off switch should be on. (p. 11)
(Remote Control)
The last viewed [Home Screen] is displayed.
Example: [TV Home Screen] Example: Selected content screen
●
To return to [Home Screen] at any time
●
You can set up or make [Home Screen] to display desired information, to access specific features easily, to select the
default [Home Screen], etc. For details, follow the on-screen instructions or refer to [eHELP] (Watching > my Home
Screen).
Watching TV
1
Select the TV viewer from [Home Screen]
select
access
2
Select DVB or Analogue
3
Select a channel
up
down
or
●
To select 2 or more-digit channel position number, e.g. 399
To access each feature
Access [APPS List] and select a feature
Example: [APPS List]
●
APPS is the applications (features) of the TV.
●
For operations of each feature and the setup of [APPS List], follow
the on-screen instructions or refer to [eHELP] (Functions > APPS
List).
14
How to Use eHELP
[eHELP] is the detailed operating instructions built into the TV, and helps you to get more understanding of the
operations for each feature.
1
Display [eHELP]
or
[Help]
[eHELP]
●
[Read first] will be displayed on the top page. Please read these instructions fully to get more understanding of
the operation in [eHELP].
●
If this is not the first time to view [eHELP] from when the TV is turned on, the confirmation screen is displayed
to select whether [First Page] or [Last Page].
2
Select the category and item
Category field
Item field
Sub item field
Description
select category
access
select item
access
select sub item
access
●
To return to the previous field
●
To scroll the description (if more than 1 page)
While the description is highlighted
●
To display the menu related to the description (only for some descriptions)
(red)
FAQs
Before requesting service or assistance, please follow these simple guides to solve the problem.
●
For more information, refer to [eHELP] (Support > FAQs).
The TV does not switch on
●
Check the mains lead is plugged into the TV and the socket outlet.
●
The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p. 3)
The TV goes into Standby mode
●
Auto power standby function is activated.
15
The remote control does not work or is intermittent
●
Are the batteries installed correctly? (p. 10)
●
Has the TV been switched on?
●
The batteries may be running low. Replace them with new ones.
●
Point the remote control directly at the TV’s remote control signal receiver (within about 7 m and a 30 degree
angle of the signal receiver).
●
Situate the TV away from sunshine or other sources of bright light not to shine on the TV’s remote control signal
receiver.
No image can be displayed
●
Check the TV is turned on.
●
Check the mains lead is plugged into the TV and the socket outlet.
●
Check the correct input mode is selected.
●
Check the setting of [AV2] ([COMPONENT] / [VIDEO]) in [Input Selection] to match the output of the external
equipment.
●
Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum?
●
Check all required cables and connections are firmly in place.
Unusual image is displayed
●
Turn the TV off with Mains power On / Off switch, then turn it on again.
●
If the problem persists, initialise all settings. [Shipping Condition] in [System Menu] (Setup Menu)
Parts of the TV become hot
●
Even if the temperature of parts of the front, top and rear panels has risen, these temperature rises do not cause
any problems in terms of performance or quality.
The LCD panel moves slightly and clattered sound is heard when it is pushed with a finger
●
There is a little gap around the panel to prevent damage to the panel. This is not a malfunction.
Check you can get Freeview HD in your area. Text your postcode, followed by your house number or
name to 80560
*
. Or visit freeview.co.uk
*
e.g. NW96NY1 (Costs no more than a normal text.)
To get the most up to date service from Freeview it is important for Freeview customers to retune from time to time.
How do I re-tune my Freeview TV ?
This is a quick reference. If you have any problems, check the Operating Instructions or ask a friend or family
member to show you how. Alternatively, go to your local electrical retailer, contact your local Panasonic dealer or
visit freeview.co.uk/retune
Re-tuning only takes a few minutes, just follow the steps below:
1. Press the TV button to select DVB mode.
2. Press the MENU button to open the main menu.
3. [Setup]
[DVB Tuning Menu] [Auto Setup]
Please note: most digital TV recorders will keep your original recordings after running a re-tune but you will need to
reset any future recordings.
Maintenance
First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints.
For stubborn dirt:
First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent
to 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture.
Caution
●
Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.
●
Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure.
●
Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may
degrade surface quality or cause peeling of the paint.
●
The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the
surface with your fingernail or other hard objects.
●
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may
degrade surface quality.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may cause fire or electrical shock.
16
Specifications
32-inch model
39-inch model
50-inch model
Model No. TX-L32BL6B TX-L39BL6B TX-L50BL6B
Dimensions (W × H × D)
741 mm × 513 mm ×
194 mm (With Pedestal)
741 mm × 448 mm ×
55 mm (TV only)
890 mm × 593 mm ×
217 mm (With Pedestal)
890 mm × 527 mm ×
60 mm (TV only)
1,139 mm × 739 mm ×
275 mm (With Pedestal)
1,139 mm × 673 mm ×
84 mm (TV only)
Mass
10.5
Net (With Pedestal)
7.0 Net (TV only)
12.5 Net (With Pedestal)
10.0 Net (TV only)
18.0 Net (With Pedestal)
15.0 Net (TV only)
Power source AC 220-240 V, 50 / 60 Hz
Panel LED LCD panel
Sound
Speaker
(90 mm × 25 mm) × 2,
8 Ω
(100 mm × 30 mm) × 2, 8 Ω
Audio output 10 W (5 W + 5 W) 20 W (10 W + 10 W)
Headphones M3 (3.5 mm) stereo mini Jack × 1
Connection terminals
AV1 input / output SCART (Audio/Video in, Audio/Video out, RGB in)
AV2 input
(COMPONENT /
VIDEO)
VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ω)
AUDIO L - R RCA PIN Type × 2 0.5 V[rms]
Y 1.0 V[p-p] (including synchronisation)
P
B, PR ±0.35 V[p-p]
HDMI 1 / 2 / 3 input
TYPE A Connectors
HDMI1 / 3: Content Type
HDMI2: Content Type, Audio Return Channel
●
This TV supports “HDAVI Control 5” function.
Card slot Common Interface slot (complies with CI Plus) × 1
ETHERNET RJ45, IEEE802.3 10BASE-T / 100BASE-TX
USB 1 / 2 USB2.0 DC 5 V, Max. 500 mA
DIGITAL AUDIO
output
PCM / Dolby Digital / DTS, Fibre optic
Receiving systems /
Band name
Check the latest
information on the
available services at the
following website.
http://panasonic.net/
viera/support
DVB-T / T2 Digital terrestrial services
PAL I UHF E21 - 68
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR) or
NTSC disc playback from DVD player and recorder
M.NTSC Playback from M.NTSC Video recorders (VCR)
NTSC
(AV input only)
Playback from NTSC Video recorders (VCR)
DVB-T Digital terrestrial services
PAL I
VHF A - J
CATV S1 - S20
UHF E21 - E69
CATV S21 - S41 (Hyperband)
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR) or
NTSC disc playback from DVD player and recorder
M.NTSC Playback from M.NTSC Video recorders (VCR)
NTSC
(AV input only)
Playback from NTSC Video recorders (VCR)
17
Aerial input
UHF VHF / UHF
Operating conditions
Temperature: 0 °C - 35 °C
Humidity: 20 % - 80 % RH (non-condensing)
Built-in wireless LAN
Standard compliance and Frequency range
*
:
IEEE802.11a/n
5.180 GHz - 5.320 GHz, 5.500 GHz - 5.580 GHz, 5.660 GHz - 5.700 GHz
IEEE802.11b/g/n
2.412 GHz - 2.472 GHz
Security: WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) WEP (64 bit/128 bit)
*
The frequency and channel differ depending on the country.
Note
●
Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
●
For the information of power consumption, display resolution, etc., please refer to Product fiche.
●
For the information of the open source software, refer to [eHELP] (Support > Licence).
●
This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024
■ When using the wall-hanging bracket
●
Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.
32-inch model
a: 200 mm
b: 100 mm
39-inch model
a: 200 mm
b: 200 mm
50-inch model
a: 400 mm
b: 400 mm
Rear of the TV
●
Holes for wall-hanging bracket
installation
a
Depth of screw
32-inch model
50-inch model
minimum: 23 mm minimum: 11 mm
maximum: 24 mm maximum: 16 mm
39-inch model
minimum: 19 mm
maximum: 20 mm
Diameter: M6
b
(View from the side)
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
LCD Television
Declaration of Conformity (DoC)
“Hereby, Panasonic Corporation declares that this TV is in compliance with the essential requirements and other
relevant provisions of the Directive 1999/5/EC.”
If you want to get a copy of the original DoC of this TV, please visit the following website:
http://www.doc.panasonic.de
Authorized Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
This TV is intended to be used in the following countries.
Ireland, United Kingdom
The wireless LAN feature of this TV shall exclusively be used inside buildings.
Information for Users on Collection and Disposal of Old Equipment and used
Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC
and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and
prevent any potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please
contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of
your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Web Site: http://panasonic.net
Willoughby Road, Bracknell, Berkshire, RG12 8FP
© Panasonic Corporation 2013
M0713-0
Printed in Czech Republic
Sales and Support Information
Customer Communications Centre
•
For customers within the UK: 0844 844 3899
•
For customers within Ireland: 01289 8333
•
Monday − Friday 9:00am − 5:00pm, (Excluding public holidays).
•
For further support on your product, please visit our website: www.panasonic.co.uk
Direct Sales at Panasonic UK
•
Order accessory and consumable items for your product with ease and confidence by phoning our Customer
Communications Centre Monday − Friday 9:00am − 5:00pm, (Excluding public holidays).
•
Or go on line through our Internet Accessory ordering application at www.pas-europe.com.
•
Most major credit and debit cards accepted.
•
All enquiries transactions and distribution facilities are provided directly by Panasonic UK.
•
It couldn’t be simpler!
•
Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on
our website for further details.
/