Assembly:
NOTES: You can use a wrench to tighten connections at any step. • When tightening, put a rag around the shower connections to protect them.
QUESTIONS? Contact us at 1-800-245-8646 or www.amcorgroupusa.com
Amcor, Inc. 685-A Gotham Parkway · Carlstadt, NJ 07072 · Made in China
Parts:
Installation Instructions
To ensure satisfying performance, please read and follow these easy step by step instructions.
Ultimate Shower System 2
1. All you need is a wrench
OR pliers.
2. Remove your existing
shower head.
4. Mount 3-Way Diverter (Part A)
to shower arm.
OR
5. Attach 5-Function Shower
Head (Part B) to Diverter.
6. Connect the hexagon connector
of the Hose (Part C) to the
Diverter outlet.
B
7. Connect Hand Held Shower Head (Part D) to the conical connector
of Hose and position in cradle.
C
Part A
3-Way Diverter
with Cradle
Part D
5-Function
Hand Held
Shower Head
View 1
A
D
5-Function
Shower Head
Part B
8. Turn the Diverter Knob for the
3 shower options
A
View 2
3. Clean shower arm. Usually the
included white tape is not necessary.
A
Knob
72" Hose with
Swivel Connectors
Part C
Hexagon
Connector
to Diverter
Conical
Connector
to Hand
Held
Shower
Washers already
in place