Use
Select the spin speed , Night cycle or Rinse hold option
Press the Spin button repeatedly to change the spin speed, if you want your
laundry to be spun at a speed different from the one proposed by the washing
machine.
For the compatibility between options and
washing programmes consult the chapter
«Washing programmes».
Rinse hold : by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing. At the end of
the programme,
0 and -symbol will flash on the display, - symbol (door
locked) remains lit, the START/PAUSE pilot light goes off and the door is blocked to
indicate that the water must be emptied out.
To empty the water out:
● turn the programme selector dial to O
● select the DRAIN or SPIN programme
● reduce the spin speed if needed, by means of the relevant button
● press the START/PAUSE button
● when the programme has finished the display shows a flashing 0. The
-
symbol goes off and the door can be opened.
Night cycle : by selecting this option, the machine will not drain the water of
the last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed,
this washing cycle is very noiseless and it can be selected at night or in times with a
more economical power rate
. On COTTONS, MIX 40-60, SYNTHETICS, JEANS,
DELICATES, VISCOSE, LINGERIE, SILK and SPORT INTENSIVE programmes (except
for EASY IRON, BLANKET, 20 MIN. - 3 KG and SPORT JACKETS) the rinses will be
performed with more water. At the end of the programme,
0 and -symbol
will flash on the display, the door -symbol (Door locked) remains lit, the
START/PAUSE pilot light goes off and the door is blocked to indicate that the water
must be emptied out.
To empty out the water, please read the previous option chapter.
15
OK
192998542_GB.qxd 1/8/2009 3:06 PM Page 15