Whirlpool AKM 400/NB/01 User guide

Category
Cookers
Type
User guide

This manual is also suitable for

AKM 400 PRODUCT DESCRIPTION SHEET
ES PT
5019 319 60411
The control knobs for the burners and for
the electric hot plate are on the control
panel on the oven.
Operation of burners
To light one of the burners:
Press the relative knob and turn it
anti-clockwise to the large flame setting .
At the same time, bring a flame near the
burner so as to cause it to ignite.
Important:
Improper use of the grids can result in damage to
the hob: do not position the grids upside down or
slide them across the hob.
Do not use:
Cast iron griddles or terracotta pots and pans.
Heat diffusers such as metal mesh, or any
other types.
Two burners simultaneously for one
receptacle (e.g. fish kettle).
1. Removable panstand grids
2-3-5. Medium burners
4. Large burners
Symbols
Shaded circle Tap closed
Large flame
Maximum opening/
delivery
Small flame
Minimum opening
or reduced delivery
DIMENSIONS OF COOKING HOB AND WORKTOP
NOTE: In case of installation of a hood above the cooktop, please refer to the hood
instructions for the correct distance.
INJECTORS TABLE CATEGORY II2H3+
Type of gas used
Type of
burner
Injector
marking
Rated
heat
capacity
Pcs-kW
Rated
consumption
Reduced
heat
capacity
Pcs-kW
Gas pressure
min. rat. max.
NATURAL GAS
(Methane) G 20
large
medium
128
94
3.00
1.65
286 l/h
157 l/h
0.60
0.35
17 20 25
LIQUID
PETROLEUM GAS
(Cylinder) G 30
large
medium
85
65
3.00
1.65
218 g/h
120 g/h
0.60
0.35
20 28-30 35
LIQUID
PETROLEUM GAS
(Cylinder) G 31
large
medium
85
65
3.00
1.65
214 g/h
118 g/h
0.60
0.35
25 37 45
Type of gas used
Appliance
model
Total rated heat
capacity Pcs-kW
Total rated
consumption
Air required
for burning
m
3
/h
G20 20 mbar
4 gas 7.95 757 l/h 15.9
G30 28-30 mbar
4 gas 7.95 578 g/h 15.9
G31 37 mbar
4 gas 7.95 568 g/h 15.9
  • Page 1 1
  • Page 2 2

Whirlpool AKM 400/NB/01 User guide

Category
Cookers
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI