Panasonic KXTH102C Operating instructions

Brand: Panasonic

Model: KXTH102C

Category: Telephones

Type: Operating instructions

PQQW14743XA DM1105MH2036

Setting up the base unit

To connect to the AC adaptor

L Use only the included Panasonic AC adaptor PQLV205.

L The AC adaptor must remain connected at all times.

To connect the telephone line cord

L Connect the telephone line cord until it clicks into the telephone jack.

To connect to a 2-line telephone jack

To connect to 2 single-line telephone jacks

(120 V AC, 60 Hz)

Hook

LINE1/2

LINE2

LAN

LINE1/2

LINE2

LAN

To 2-line telephone

jack (RJ14C)

4-wire telephone line cord with green plugs

LINE1/2

LINE2

LAN

Line 1

Line 2

To single-line telephone jacks (RJ11C)

2-wire telephone line cord

with transparent plugs

4-wire telephone line cord

with green plugs

Model No. KX-TH102-C

Quick Guide

TH102C_QG(e).fm Page 1 Monday, March 6, 2006 5:26 PM

– 2 –

Setting up the handset

To connect the AC adaptor of charger

L Use only the included Panasonic AC adaptor PQLV203.

To install and charge the battery

1 Insert the battery (A), and press it down

until it snaps into the compartment (B).

Then close the handset cover.

2 Place the handset on the charger for 4

hours before initial use.

Symbols used for operations

Symbol Meaning

d, G, A,

f, F, h

The symbols to the left represent the base unit menu icons.

Example: d

Press the navigator key of the base unit up, down, left, or right

to select that menu icon shown on the display.

d, G, i, f,

F, h

The symbols to the left represent the handset menu icons.

Example: d

Push the joystick of the handset up, down, left, or right to select

that menu icon shown on the display.

Example:

“Ringer volume”

Push the joystick of the handset or press the navigator key of the

base unit up or down to select the words in quotations shown on

the display.

(120 V AC,

60 Hz)

TH102C_QG(e).fm Page 2 Monday, March 6, 2006 5:26 PM

– 3 –

i Proceed to the next operation.

Example: {MENU} The words in the brackets show button names on the handset

and base unit.

{^}, {V} Push the joystick of the handset or press the navigator key of the

base unit up or down to scroll through the displayed items.

{<}, {>} Push the joystick of the handset or press the navigator key of the

base unit left or right to select the desired items.

Setting the date and time (Handset)

1 {MENU} (center of joystick) i h

i {SELECT}

2 “Date and time” i

{

SELECT}

3 Enter the current month, day, and

year by selecting 2 digits for each.

4 Enter the current hour and minute (12-

hour clock format) by selecting 2 digits

for each.

5 Press {*} to select “AM” or “PM”.

{

SAVE} i

{

OFF}

Adding phonebook items (Handset)

1 {MENU} (center of joystick) i d

i {SELECT}

2 {ADD}

3 Enter the name (max. 16 characters).

i {NEXT}

4 Enter the phone number (max. 32

digits). i {NEXT}

5 Select the desired ringer ID. i

{NEXT}

6 Select the desired light-up ID. i

{NEXT} i {SAVE}

7 {OFF}

Basic operation (Base unit)

Feature Operation

Making a call Dial the phone number. i {SP-PHONE}

L You can also press {LINE1} or {LINE2} to make calls.

Answering a call {SP-PHONE}

Hanging up {SP-PHONE}

Speaker volume Press {V} or {^} repeatedly while on a call.

Making a call with the

redial list

1 {REDIAL}

2 Press {^} or {V} to select the desired number.

3 {SP-PHONE}

Putting an outside call

on hold

Press {HOLD} during an outside call.

Symbols used for operations

Symbol Meaning

TH102C_QG(e).fm Page 3 Monday, March 6, 2006 5:26 PM

– 4 –

Dialing mode 1 { MENU} i h i {SET}

2 “Set tel line” i {SET}

3 “Set dial mode” i {SET}

4 Select the desired setting. i {SET} i {STOP}

Basic operation (Handset)

Feature Operation

Making a call Dial the phone number. i {C}

L You can also press {LINE1} or {LINE2} to make calls.

Making a call with the

redial list

1 {REDIAL}

2 Push {^} or {V} to select the desired number.

3 {C}

Phonebook: making a

call

1 {MENU} (center of joystick) i d i {SELECT}

2 Push {^} or {V} to select the desired item.

3 {C}

Answering a call {C}

Turning on the

speakerphone

{s}

Hanging up {OFF}

Receiver/speaker

volume

Push {^} or {V} repeatedly while on a call.

Putting an outside call

on hold

Press {HOLD} 2 times during an outside call.

Viewing the caller list

and calling back

1 {MENU} (center of joystick) i G i {SELECT}

2 Push {V} to search from the most recent call, or {^} to search

from the oldest call.

3 {C}

Ringer volume 1 {MENU} (center of joystick) i f i {SELECT}

2 “Ringer volume” i {SELECT}

3 Select the desired line.

4 Select the desired volume. i {SAVE} i {OFF}

Ringer tone (outside

calls)

1 {MENU} (center of joystick) i f i {SELECT}

2 “Ringer tone” i {SELECT}

3 Select the desired line.

4 Select the desired item. i {SAVE} i {OFF}

Basic operation (Base unit)

Feature Operation

TH102C_QG(e).fm Page 4 Monday, March 6, 2006 5:26 PM

– 5 –

Answering system (Base unit)

Feature Operation

Answering on/off {ANSWER ON}

Recording your

greeting message

1 {MENU} i A i {SET}

2 “Greeting record” i {SET}

3 Select the desired line. i {SET}

4 After the unit beeps, speak clearly about 20 cm (8 inches)

away from the MIC (max. 2 minutes).

5 To stop recording, press {STOP}.

Listening to new

messages

When the MESSAGE indicator flashes on the base unit, press

{MESSAGE}.

Listening to old

messages

When the MESSAGE indicator does not flash, press

{MESSAGE}.

Erasing a message Press {ERASE} during playback.

Frequently asked questions

Question Cause & solution

What should I do

when the unit does

not work?

L Fully charge the battery.

L Make sure that the included AC adaptor and telephone line

cords are plugged into the unit properly.

L The handset is not registered to the base unit. Register it (refer

to the operating instructions for registration).

L Move closer to the base unit.

When should I

replace the battery?

L Replace the battery with a new one when you charged the

battery until 1 is displayed but 3 is displayed after a few

20 or 30 minute voice calls.

What should I do if I

forget the PIN?

L If you set the PIN and you cannot remember it, you can reset

the base unit. To reset the base unit, refer to the operating

instructions.

What do I need to do

to display the 2nd

caller’s information

during an outside

call?

L In order to use Caller ID, Call Waiting, or Call Waiting Caller ID

(CWID), you must first contact your telephone company and

subscribe to the desired service. After subscribing, you may

need to contact your telephone company again to activate this

specific service, even if you already subscribed to both Caller

ID and Call Waiting with Caller ID services (CWID).

Why new messages

are not recorded in

the unit?

L If you subscribe to the Voice Mail service, messages are

recorded by the telephone company not your telephone (refer

to the operating instructions for Voice Mail service).

How can I increase

handset volume level?

L Push the joystick {^} repeatedly while talking.

Can I keep battery

charging all the time?

L You can leave handset on the charger anytime. There is no

damage to the battery.

TH102C_QG(e).fm Page 5 Monday, March 6, 2006 5:26 PM

1 Read this Quick Guide or Operating

Instructions

2 Visit our website:

http://www.panasonic.com/phonehelp

3 Contact us via the web at:

http://www.panasonic.com/contactinfo

4 Call us at:

1-800-211-PANA (1-800-211-7262)

To order a replacement battery,

please call: 1-800-332-5368

Or visit:

http://www.panasonic.com/batterystore

IMPORTANT!

If your product is not

working properly. . .

TH102C_QG(e).fm Page 6 Monday, March 6, 2006 5:26 PM

Panasonic KXTH102C Operating instructions

Brand: Panasonic

Model: KXTH102C

Category: Telephones

Type: Operating instructions

Download PDF

report

Panasonic KXTH102C Operating instructions

Panasonic KXTH102C Operating instructions

Related papers

Other documents