631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • D0308
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Mounting Plates MP
Page 1 of 2 Accessories for use with Emergency Lighting Units, Exit Signs & Remote Lamp Heads
Lightolier is a Philips group brand
MP1 MP1 MP1 MP1S MP1
MP3 MP3 MP3 MP3S MP3
CRMP1 CRMP1 CRMP1 MP1WP CRMP1
CRMP2 CRMP2 CRMP2 MP2WP CRMP2
CSMP1 CSMP1 CSMP1 MP1R CSMP1
CSMP2 CSMP2 CSMP2 MP2 CSMP2
MG1WP
MW1 MW1 MW1
MBLK1 MBLK1 MBLK1
-WP -WP -WP included*
MG2WP
MW2 MW2 MW2
MBLK2 MBLK2 MBLK2
-WP -WP -WP included*
MG2SWP
MW2S MW2S MW2S
-WP -WP -WP
Chrome Single Head Fits
Single Gang Wall Box
Double Head Fits Three
or Four Gang Wall Box
Cast Aluminum-
Weatherproof Single
Head
Fits 3” or 4” round box
Double Head
Fits 3” or 4” round box
Cast Aluminum-
Weatherproof
Fits Single Gang Box
Single Head
Double Head
Thermoplastic 5”
Diameter Mounts Dir. to
Single Gang Wall Box
Single Head, Gray
Single Head, White
Single Head, Black
Weatherproof Option
Double Head, Gray
Double Head, White
Double Head, Black
Weatherproof Option
Same As Above With 45º
Mounting Holes, Fits 3.5”
octagonal box
Double Head, Gray
Double Head, White
Weatherproof Option
Lamp Head Types
(Match mounting plates with lamp heads on
RH specification sheet)
Thermoplastic Wedge Base
Polycarbonate Rectangular
Thermoplastic
Sealed Beam
Metal Chrome
Polycarbonate Sealed
Beam
* Mounting plates include weatherproof gasket
Shown:
Mounting Plate: (1) MW2
Lamp Head: (2) S66W
Shown:
Mounting Plate: (1) MP2
Lamp Head: (2) CT86
Shown:
Mounting Plate: (1) MP1
Lamp Head: (1) HT86
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • D0308
Accessories ACC
Page 2 of 2 Accessories for use with Emergency Lighting Units, Exit Signs & Remote Lamp Heads
Lightolier is a Philips group brand
•
Wire guards and the polycarbonate vandal shield provide protection from accidental or intentional
abuse of emergency lighting equipment
•
Ideal for high traffic areas such as schools,
gymnasiums and public buildings
CAT. NO. FOR USE WITH: A AA B BB C
WG E4112L, E4215L, E4225L, E4210N, 20.0” 26.0” 20.0” 26.0” 11.0”
E4212N, IE Series (85-180W),
50.8 cm 66.0 cm 50.8 cm 66.0 cm 27.9 cm
HE Series (85-120W)
WG3 S1 Series 10.0” 12.0” 10.0” 12.0” 5.5”
25.4 cm 30.5 cm 25.4 cm 30.5 cm 14.0 cm
WG4 LT Series Exit, Wall Mount 12.5” 14.5” 15.0” 17.0” 5.5”
Thermoplastic, Die Cast, & Tritium
31.8 cm 36.8 cm 38.1 cm 43.2 cm 14.0 cm
Standard Exits, Two Head
Thermoplastic Exits
S1 Series (Fully Recessed)
WG5 E5 Series, E3 Series 18/25/36/50 w, 16.0” 18.0” 21.0” 23.0” 10.0”
E3 Series 36/50 w, E4 Series 18-100 w,
40.6 cm 45.7 cm 53.3 cm 58.4 cm 25.4 cm
E4225N25, E42 36-100w, E4250N,
WE Series, HE Series
(25-75W),
IE Series
(25-70W), LC Series
WG8 Top and Back Mount NEMA Standard 12.0” 14.0” 12.0” 14.0” 13.0”
Exits
30.5 cm 35.6 cm 30.5 cm 35.6 cm 33.0 cm
WG9 Two Head Thermoplastic Exits with 22.0” 23.5” 12.0” 14.0” 13.0”
Side Mount Heads
55.9 cm 59.7 cm 30.5 cm 35.6 cm 33.0 cm
WG10 End Mount Thermoplastic, Die 8.8” N/A N/A 15.0” 15.0”
Cast, Steel, NEMA and Tritium
22.4 cm 38.1 cm 38.1 cm
Standard Exits
PCS1 All Standard Exits (Except Combo) 19.4” (W) X 12.3” (H) X 9.0” (D) Outside
E5 Series, C1 Series, E3 Series 19.2” (W) X 12.1” (H) X 8.9” (D) Inside
A
AA
B
BB
C = depth
WHITE FOR USE WITH SERIES NO DIMENSIONS
SHELF LENGTH HEIGHT WIDTH
MWSHELFW E4 Series (75-100W), E4225N 13.5” 5.5” 6.0”
Except E4210N
(34.3 cm) (14.0 cm) (15.2 cm)
MLSHELFW
E4 Series (18-50W)
14.6” 5.5” 3.5”
(37.1 cm) (14.0 cm) (8.9 cm)
MSSHELFW
E3 Series
14.6” 5.5” 5.3”
(37.1 cm) (14.0 cm) (13.5 cm)
MXSHELFW
E4112L, E4215L, E4225L,
16.5” 7.9” 8.0”
E4210N, E4212N
(41.9 cm) (20.1 cm) (20.3 cm)
(Mounting shelves have a white epoxy powder coat finish.)
Shown: WG5
Shown: PCS1
/