2. YIGII
  3. KS001H

YIGII KS001H User manual

  • Hello! I've reviewed the user manual for the adhesive hook. It outlines the proper installation method, emphasizing the need for smooth surfaces and a 24-hour wait before use. Additionally, there are instructions for removal using a hair dryer to heat the adhesive. I'm ready to answer any questions you have about this product and the information provided.
  • What surfaces can I use this hook on?
    How do I install the hook?
    How do I remove the hook?
1 2
3 4
Note: It can only be used on smooth surface, such as glass, tile, mirror,
cultured marble, plastic, paneling, smooth metal surface, etc. Please do
not stick it on uneven surface, such as paper wall, painted wall.
Installation Instructions
1. Clear and dry the wall surface.
2. Peel the 3m tape and stick the product on the target wall surface.
3. Press for 5-8 seconds and waiting 24 hours to make it more stable
before hanging things
How to remove?
1. Using a hair dryer to heat the self-adhesive glue of the hook.
2. Slowly pull the hook from one side and do not stop heating until the
hook separates from the bonding surface completely.
3. Be careful not to get scalded when removing the hook by using the
hair dryer.
EN
Use Manual
/