KERN TPFB 6000-1-B Operating instructions

KERN & Sohn GmbH

www.kern-sohn.com

Ziegelei 1

72336 Balingen-Frommern

Germany

+0049-[0]7433-9933-0

+0049-[0]7433-9933-149

[email protected]

Operating instructions

Precision Balance

KERN PFB

Type TPFB-B

Version 1.0

2023-08

GB

TPFB-B-BA-e-2310

2 TPFB-B-BA-e-2310

GB

KERN PFB

Version 1.0 2023-08

Operating instructions

Precision balance

Content

1 Technical data .................................................................................................... 5

2 Declaration of conformity .................................................................................. 9

3 Appliance overview.......................................................................................... 10

3.1 Components ................................................................................................ 10

3.2 Operating elements ..................................................................................... 13

3.2.1 Keyboard overview ..........................................................................................13

3.2.2 Numerical input ...............................................................................................14

3.2.3 Overview of displays .......................................................................................15

4 Basic Information (General) ............................................................................ 16

4.1 Proper use ................................................................................................... 16

4.2 Improper Use ............................................................................................... 16

4.3 Warranty ...................................................................................................... 16

4.4 Monitoring of Test Resources ...................................................................... 17

5 Basic Safety Precautions ................................................................................ 17

5.1 Pay attention to the instructions in the Operation Manual ........................... 17

5.1 Personnel training........................................................................................ 17

6 Transport and storage ..................................................................................... 17

6.1 Testing upon acceptance ............................................................................ 17

6.1 Packaging / return transport ........................................................................ 17

7 Unpacking, Installation and Commissioning ................................................. 18

7.1 Installation Site, Location of Use ................................................................. 18

7.2 Unpacking and checking ............................................................................. 19

7.3 Assembling, Installation and Levelling ......................................................... 19

7.4 Mains connection......................................................................................... 19

7.5 Rechargeable battery operation (Factory option) ........................................ 20

7.5.1 Load rechargeable battery ..............................................................................20

7.6 Connection of peripheral devices ................................................................ 21

7.7 Initial Commissioning ................................................................................... 21

7.8 Adjustment .................................................................................................. 21

7.8.1 External adjustment < CalExt > ................................................................22

TPFB-B-BA-e-2310  3 
8.2 External adjustment with user-defined adjustment weight < caleud > .......23 
8.3 Gravitational constant adjustment location < graadj > ..............................25 
8.4 Gravitational constant place of location < grause > ...................................26 
Basic Operation ............................................................................................... 27 
1 Turn on/off ................................................................................................... 27 
2 Simple weighing .......................................................................................... 27 
3 Zeroing ........................................................................................................ 28 
4 Taring .......................................................................................................... 28 
5 Switch-over weighing unit ............................................................................ 29 
Operating concept ........................................................................................... 31 
Application <Weighing> ............................................................................... 33 
1 Application-specific settings ..................................................................... 33 
2 PRE-Tare ................................................................................................. 34 
2.1 Take over the placed weight as PRE-TARE value ...........................................34 
2.2 Enter the known tare weight numerically .........................................................35 
3 Data-Hold function ................................................................................... 36 
4 Weighing Units ......................................................................................... 36 
4.1 Setting weighing unit .......................................................................................36 
4.2 Weighing with multiplication factor via the application unit <FFA> ...................37 
4.3 Percent weighing by application unit <%> .......................................................38 
4.4 Molar weighing mode ......................................................................................39 
Application <Counting> ............................................................................... 40 
1 Application-specific settings ..................................................................... 40 
2 Using the application ................................................................................ 41 
2.1 Piece counting.................................................................................................41 
2.2 Target counting ...............................................................................................44 
Application < Checkweighing > ................................................................... 47 
1 Application-specific settings ..................................................................... 47 
2 Using the application ................................................................................ 48 
2.1 Target weighing ...............................................................................................48 
2.2 Checkweighing ................................................................................................51 
Menü .............................................................................................................. 53 
1 Navigation in the menu............................................................................. 53 
2 Application menu ...................................................................................... 53 
3 Setup menu .............................................................................................. 54 
3.1 Overview < setup > ....................................................................................54 
Interfaces ....................................................................................................... 58 

  TPFB-B-BA-e-2310 
1 RS-232C interface .................................................................................... 58 
1.1 Technical data .................................................................................................58 
1.2 Interface cable.................................................................................................58 
1.3 Connect printer................................................................................................59 
2 Bluetooth (Factory option) ........................................................................ 59 
2.1 Add device ......................................................................................................59 
2.2 Determine COM Port number ..........................................................................62 
3 KERN Communications Protocol (KERN Interface Protocol) ................... 63 
4 Issue functions ......................................................................................... 64 
4.1 Add-up mode < sum > ....................................................................................64 
4.2 Data output after pressing the PRINT button < manual > ...........................66 
4.3 Automatic data output < auto > ...................................................................67 
4.4 Continuous data output < cont > .................................................................67 
5 Data format .............................................................................................. 68 
Servicing, maintenance, disposal ............................................................... 69 
1 Cleaning ................................................................................................... 69 
2 Servicing, maintenance ............................................................................ 69 
3 Disposal ................................................................................................... 69 
Instant help for troubleshooting .................................................................. 70 
Error messages ............................................................................................. 71 
 
   

TPFB-B-BA-e-2310 5

1 Technical data

KERN

PFB 600-3

Item no./ Type

TPFB 600-3-A

Readability (d)

0,001 g

Weighing range (max)

600 g

Reproducibility

0,005 g

Linearity

± 0,005 g

Stabilization time (typical)

6 s

Smallest part weight for

piece counting - under lab

conditions*

2 mg

Smallest part weight for

piece counting - under

normal conditions**

20 mg

Recommended adjust-

ment weight, not added

(class)

600 g (F1)

Warm-up time

4 h

Weighing Units

g, kg, gn, dwt, tl (Tw), tl (HK), ozt, tl (Singap, Malays), ct, mo, lb, oz, ffa, m

Humidity of air

80 %

Allowable ambient tempe-

rature

15 °C … 30 °C

Input voltage Appliance

12 V, 500 mA

Input voltage Mains adapter

100 V – 240 V, 50 / 60 Hz

Storage battery operation (fac-

tory option)

Operating time 72 hrs (backlight off)

Operating time 36 hrs (backlight on)

Loading time approx. 6,5 hrs.

Auto-Off (rechargeable battery)

selectable off, 30s, 1, 2, 5, 30, 60 min

Dimensions housing

210 x 315 x 90 mm

Weighing plate, stainless

steel

Ø 120 mm

Net weight (kg)

2,0

Interfaces

RS232, Bluetooth 2.0 (factory option), Bluetooth 4.0 (factory option)

6 TPFB-B-BA-e-2310

KERN

PFB 120-3

PFB 200-3

PFB 300-3

Item no./ Type

TPFB 120-3-B

TPFB 200-3-B

TPFB 300-3-B

Readability (d)

0,001 g

Weighing range (max)

120 g

200 g

300 g

Reproducibility

0,002 g

0,003 g

Linearity

± 0,003 g

± 0,004 g

± 0,005 g

Stabilization time (typical)

2 s

Smallest part weight for

piece counting - under lab

conditions*

2 mg

Smallest part weight for

piece counting - under

normal conditions**

20 mg

Recommended adjust-

ment weight, not added

(class)

100 g (F1)

200 g (F1)

300 g (F1)

Warm-up time

2 h

Weighing Units

g, kg, gn, dwt, tl (Tw), tl (HK), ozt, tl (Singap, Malays), ct, mo, lb, oz, ffa, m

Humidity of air

80 %

Allowable ambient tempe-

rature

15 °C … 30 °C

Input voltage Appliance

12 V, 500 mA

Input voltage Mains adapter

100 V – 240 V, 50 / 60 Hz

Storage battery operation (fac-

tory option)

Operating time 72 hrs (backlight off)

Operating time 36 hrs (backlight on)

Loading time approx. 6,5 hrs.

Auto-Off (rechargeable battery)

selectable off, 30s, 1, 2, 5, 30, 60 min

Dimensions housing

210 x 315 x 90 mm

Weighing plate, stainless

steel

Ø 80 mm

Net weight (kg)

1,4

2,0

Interfaces

RS232, Bluetooth 2.0 (factory option), Bluetooth 4.0 (factory option)

TPFB-B-BA-e-2310 7

KERN

PFB 600-2

PFB 1200-2

PFB 2000-2

Item no./ Type

TPFB 600-2-B

TPFB 1200-2-B

TPFB 2000-2-B

Readability (d)

0,01 g

Weighing range (max)

600 g

1200 g

2000 g

Reproducibility

0,01 g

0,02 g

Linearity

± 0,02 g

± 0,03 g

± 0,04 g

Stabilization time (typical)

2 s

Smallest part weight for

piece counting - under lab

conditions*

20 mg

Smallest part weight for

piece counting - under

normal conditions**

200 mg

Recommended adjust-

ment weight, not added

(class)

600 g (F1)

1 kg (F1)

2 kg (F1)

Warm-up time

2 h

Weighing Units

g, kg, gn, dwt, tl (Tw), tl (HK), ozt, tl (Singap, Malays), ct, mo, lb, oz, ffa, m

Humidity of air

80 %

Allowable ambient tempe-

rature

15 °C … 30 °C

Input voltage Appliance

12 V, 500 mA

Input voltage Mains adapter

100 V – 240 V, 50 / 60 Hz

Storage battery operation (fac-

tory option)

Operating time 72 hrs (backlight off)

Operating time 36 hrs (backlight on)

Loading time approx. 6,5 hrs.

Auto-Off (rechargeable battery)

selectable off, 30s, 1, 2, 5, 30, 60 min

Dimensions housing

210 x 315 x 90 mm

Weighing plate, stainless

steel

Ø 120 mm

Net weight (kg)

2,0

1,4

1,6

Interfaces

RS232, Bluetooth 2.0 (factory option), Bluetooth 4.0 (factory option)

8 TPFB-B-BA-e-2310

KERN

PFB 3000-2

PFB 6000-1

PFB 6000-2

Item no./ Type

TPFB 3000-2-B

TPFB 6000-1-B

TPFB 6000-2-B

Readability (d)

0,01 g

0,1 g

0,01 g

Weighing range (max)

3000 g

6000 g

Reproducibility

0,03 g

0,1 g

0,05 g

Linearity

± 0,05 g

± 0,2 g

± 0,05 g

Stabilization time (typical)

2 s

6 s

Smallest part weight for

piece counting - under lab

conditions*

20 mg

200 mg

20 mg

Smallest part weight for

piece counting - under

normal conditions**

200 mg

2 g

200 mg

Recommended adjust-

ment weight, not added

(class)

3 kg (F1)

6 kg (F1)

Warm-up time

2 h

4 h

Weighing Units

g, kg, gn, dwt, tl (Tw), tl (HK), ozt, tl (Singap, Malays), ct, mo, lb, oz, ffa, m

Humidity of air

80 %

Allowable ambient tempe-

rature

15 °C … 30 °C

Input voltage Appliance

12 V, 500 mA

Input voltage Mains adapter

100 V – 240 V, 50 / 60 Hz

Storage battery operation (fac-

tory option)

Operating time 72 hrs (backlight off)

Operating time 36 hrs (backlight on)

Loading time approx. 6,5 hrs.

Auto-Off (rechargeable battery)

selectable off, 30s, 1, 2, 5, 30, 60 min

Dimensions housing

210 x 315 x 90 mm

Weighing plate, stainless

steel

Ø 120 mm

190 x 180 mm

Net weight (kg)

1,4

2,0

Interfaces

RS232, Bluetooth 2.0 (factory option), Bluetooth 4.0 (factory option)

TPFB-B-BA-e-2310 9

* Smallest part weight for piece counting - under lab conditions:

➢ There are ideal ambient conditions for high-resolution counting

➢ The parts to be counted are not scattered

** Smallest part weight for piece counting - under normal conditions:

➢ There are unsteady ambient conditions (draft, vibrations)

➢ The parts to be counted are being scattered

2 Declaration of conformity

The current EC/EU Conformity declaration can be found online in:

www.kern-sohn.com/ce

10 TPFB-B-BA-e-2310

3 Appliance overview

3.1 Components

Models with round weighing plate:

Pos.

Designation

Pos.

Designation

1

Bubble level

5

Display

2

Levelling screw

6

Keyboard

3

Windshield

7

RS232 connection

4

Weighing plate

8

Mains adapter connection

TPFB-B-BA-e-2310 11

Models with square weighing plate:

Pos.

Designation

Pos.

Designation

1

Bubble level

5

Keyboard

2

Levelling screw

6

RS232 connection

3

Weighing plate

7

Mains adapter connection

4

Display

12 TPFB-B-BA-e-2310

Transport lock:

TPFB-B-BA-e-2310 13

3.2 Operating elements

3.2.1 Keyboard overview

Button

Name

Function in Operating mode

Function in Menu

PRINT/ESC

➢ Calculate weighing data via

interface

➢ Exit menu / back to weighing

mode

➢ Menu level back

MODE

➢ Switch weighing unit

➢ Navigation key 

PCS

➢ Counting, see chap. 11

➢ Navigation key 

%

➢ Percent weighing, see chap.

0

➢ Navigation key ➔

TARE

➢ Taring

➢ Navigation key 

ZERO

➢ Zeroing

➢ Select menu item

➢ Confirm selection

ON/OFF

➢ Switch on/off

(press button long time)

➢ Switch on/off the display

background illumination

(press button short time)

14 TPFB-B-BA-e-2310

3.2.2 Numerical input

Button

Designation

Function

Navigation key 

Select cipher

Confirm entry. Press button repeatedly for every

digit. Wait until the numeric input window extin-

guishes.

Navigation key ➔

Select cipher

Confirm entry. Press button repeatedly for every

digit. Wait until the numeric input window extin-

guishes.

Navigation key 

Reduce flashing cipher (0 – 9)

Navigation key 

Increase flashing cipher (0 – 9)

TPFB-B-BA-e-2310 15

3.2.3 Overview of displays

Beschreibung

Stability display

>0<

Zero display

Minus display

Tolerance marks for check weighing

Bar graph display

Indicates how much the weighing plate is loaded with respect to the maxi-

mum weighing range

PRE-Tare enabled

Data-Hold enabled

Display net weight value

Display gross weight value

Weighing data can be found in the sum memory

Autoprint enabled

Units display /

Pcs/ %

options g, kg, lb, gn, dwt, oz, ozt

or

Application icon [Pcs] for piece counting

or [%] for determination of percentage

LO

OK

HI

16 TPFB-B-BA-e-2310

4 Basic Information (General)

4.1 Proper use

The balance you purchased is intended to determine the weighing value of material to

be weighed. It is intended to be used as a “non-automatic balance”, i.e. the material to

be weighed is manually and carefully placed in the centre of the weighing plate. As

soon as a stable weighing value is reached, the weighing value can be read.

4.2 Improper Use

• Our balances are non-automatic balances and not provided for use in dynamic

weighing processes. However, the balances can also be used for dynamic weighing

processes after verifying their individual operative range, and here especially the

accuracy requirements of the application.

• Do not leave permanent load on the weighing plate. This may damage the meas-

uring system.

• Impacts and overloading exceeding the stated maximum load (max) of the balance,

minus a possibly existing tare load, must be strictly avoided. Balance may be da-

mage by this.

• Never operate the balance in explosive environment. The serial version is not ex-

plosion protected.

• The structure of the balance may not be modified. This may lead to incorrect weigh-

ing results, safety-related faults and destruction of the balance.

• The balance may only be used according to the described conditions. Other areas

of use must be released by KERN in writing.

4.3 Warranty

Warranty claims shall be voided in case:

• Our conditions in the operation manual are ignored

• The appliance is used beyond the described uses

• The appliance is modified or opened

• Mechanical damage or damage by media, liquids, natural wear and tear

• The appliance is improperly set up or incorrectly electrically connected

• The measuring system is overloaded

TPFB-B-BA-e-2310 17

4.4 Monitoring of Test Resources

In the framework of quality assurance the measuring-related properties of the balance

and, if applicable, the testing weight, must be checked regularly. The responsible user

must define a suitable interval as well as type and scope of this test. Information is

available on KERN’s home page (www.kern-sohn.com) with regard to the monitoring

of balance test substances and the test weights required for this. In KERN's accredited

calibration laboratory test weights and balances may be calibrated (return to the na-

tional standard) fast and at moderate cost.

5 Basic Safety Precautions

5.1 Pay attention to the instructions in the Operation Manual

 Carefully read this operation manual before setup and commission-

ing, even if you are already familiar with KERN balances.

5.1 Personnel training

The appliance may only be operated and maintained by trained staff.

6 Transport and storage

6.1 Testing upon acceptance

When receiving the appliance, please check packaging immediately, and the appliance

itself when unpacking for possible visible damage.

6.1 Packaging / return transport

 Keep all parts of the original packaging for a possibly required return.

 Only use original packaging for returning.

 Prior to dispatch disconnect all cables and remove loose/mobile parts.

 Reattach possibly supplied transport securing devices.

 Secure all parts such as the wind screen, the weighing plate, power

supply unit etc. against shifting and damage.

18 TPFB-B-BA-e-2310

7 Unpacking, Installation and Commissioning

7.1 Installation Site, Location of Use

The balances are designed in a way that reliable weighing results are achieved in

common conditions of use.

You will work accurately and fast, if you select the right location for your balance.

On the installation site observe the following:

• Place the balance on a firm, level surface.

• Avoid extreme heat as well as temperature fluctuation caused by installing next

to a radiator or in the direct sunlight.

• Protect the balance against direct draughts due to open windows and doors.

• Avoid jarring during weighing.

• Protect the balance against high humidity, vapours and dust.

• Do not expose the device to extreme dampness for longer periods of time.

Non-permitted condensation (condensation of air humidity on the appliance)

may occur if a cold appliance is taken to a considerably warmer environment.

In this case, acclimatize the disconnected appliance for ca. 2 hours at room

temperature.

• Avoid static charge of goods to be weighed or weighing container.

• Do not operate in areas with hazard of explosive material or in potentially ex-

plosive atmospheres due to materials such as gasses, steams, mists or dusts.

• Keep away chemicals (such as liquids or gasses), which could attack and dam-

age the balance inside or from outside.

• In the event of the occurrence of electromagnetic fields, static charges (e.g.,

when weighing / counting plastic parts) and unstable power supply, large display

deviations (incorrect weighing results, as well as damage to the scale) are pos-

sible. Change location or remove source of interference.

TPFB-B-BA-e-2310 19

7.2 Unpacking and checking

Remove device and accessories from packaging, remove packaging material and in-

stall the device at the planned workplace. Check if that there has been no damage and

that all items of delivery scope are present.

Scope of delivery / serial accessories:

• Balance

• Mains adapter

• Operating instructions

• Protective hood

7.3 Assembling, Installation and Levelling

 Remove the transportation lock.

 Install weighing plate and wind shield if necessary.

 Ensure that the balance is installed in a level position.

 Level balance with foot screws until the air bubble of the water balance is in the

prescribed circle.

 Check levelling regularly

7.4 Mains connection

Select a country-specific power plug and insert it in the mains adapter.

Check, whether the voltage acceptance on the scales is set correctly. Do

not connect the scales to the power mains unless the information on the

scales (sticker) matches the local mains voltage.

Only use KERN original mains adapter. Using other makes requires con-

sent by KERN.

Important:

➢ Before starting your weighing balance, check the mains cable for

damage.

➢ Ensure that the power unit does not come into contact with liquids.

➢ Ensure access to mains plug at all times.

20 TPFB-B-BA-e-2310

7.5 Rechargeable battery operation (Factory option)

ATTENTION

 The rechargeable battery and the battery match with each

other. Only use the delivered mains adapter.

 Do not use the balance during the loading process.

 The rechargeable battery can only be replaced by the same

or by a type recommended by the manufacturer.

 The rechargeable battery is not protected against all environmental in-

fluences. If the rechargeable battery is exposed to certain environmen-

tal influences, it may set on fire or explode. Persons may be injured or

material damage may occur.

 Protect the rechargeable battery against fire and heat.

 Do not bring the rechargeable battery in contact with fluids,

chemical substances or salt.

 Do not expose the rechargeable battery to high pressure or

microwaves.

 Under no circumstances the rechargeable batteries and the

charging unit may be modified or manipulated.

 Do not use a defective, damaged or deformed rechargeable

battery.

 Do not connect or short-circuit the electrical contacts of the

rechargeable battery with metallic objects.

 Liquid may squirt out from a damaged rechargeable battery. If

the liquid gets into contact with the skin or the eyes, the skin

and the eyes may be irritated.

 Ensure the correct polarity when inserting or changing the recharge-

able battery (see instructions in the battery compartment)

 The rechargeable battery operation is overridden when the mains

adapter is connected. For weighing in mains operation > 48 hrs. the

rechargeable batteries must be removed! (Danger of overheating).

 If the rechargeable battery starts to smell, being hot, changing

the colour or being deformed, it must be immediately un-

plugged from mains supply and from the balance if possible.

7.5.1 Load rechargeable battery

The rechargeable battery pack (Factory option) is charged using the mains cable sup-

plied

Before the first use, the rechargeable battery package should be charged by con-

necting it to the mains power cable for at least 15 hours.

To save the rechargeable battery, in menu (see chap. 13.3.1) the automatic switch-

off function < Autoff> can be activated.

If the capacity of the rechargeable batteries is exhausted, <Lo Bat> appears in the

display. Connect the power cable as soon as possible to load the rechargeable battery.

Charging time until complete recharging is approx. 6,5 hrs.

Page is loading ...

KERN TPFB 6000-1-B Operating instructions

This manual is also suitable for

KERN TPFB 6000-1-B Operating instructions

Related papers

Other documents