Sentera Controls AWP-10-13-13 Mounting Instruction

Brand: Sentera Controls

Model: AWP-10-13-13

Type: Mounting Instruction

AWP ALL-WEATHER PROTECTIVE

HOOD

Mounting and operating instructions

www.sentera.eu

MIW-AWP-EN-000 - 13 / 05 / 2022 2 - 5

back to the table of contents

AWP ALL-WEATHER PROTECTIVE

HOOD

Table of contents

PRODUCT DESCRIPTION 3

ARTICLE CODE 3

INTENDED AREA OF USE 3

CONTENTS IN THE BOX 3

STANDARDS 3

MOUNTING INSTRUCTIONS IN STEPS 4

TRANSPORT AND STORAGE 5

WARRANTY AND RESTRICTIONS 5

www.sentera.eu

MIW-AWP-EN-000 - 13 / 05 / 2022 3 - 5

back to the table of contents

AWP ALL-WEATHER PROTECTIVE

HOOD

PRODUCT DESCRIPTION

AWP is an all-weather protective hood for outdoor sensors that protects them

against variable weather factors and direct sunlight. It aims to increase the service

life of HVAC outdoor sensors and increase the reliability of their measurements.

ARTICLE CODE

Article codes

Code Width [mm](assembled) Depth [mm](assembled) Height [mm](assembled)

AWP-10-13-13 103 127 128

INTENDED AREA OF USE

■ Protects Sentera outdoor sensors against direct sunlight and variable weather

conditions.

■For outside use.

CONTENTS IN THE BOX

Contents in the box

Element Pcs. Material Dimensions

SNAP-Rivet 7Polyamide, light grey

Sheet 4 Polypropylene, white

Sheet (back) 1 Polypropylene, white

STANDARDS

■Coneg norm (USA) & Directive 94/62/EC

■ RoHS Directive 2002/95/EC (European Parliament and the Council of 27 January

2003)

www.sentera.eu

MIW-AWP-EN-000 - 13 / 05 / 2022 4 - 5

back to the table of contents

AWP ALL-WEATHER PROTECTIVE

HOOD

MOUNTING INSTRUCTIONS IN STEPS

1. Fix Part 1 to the wall together with the product.

2. Snap/connect part 2 to part 1 using part 5 (snap rivet).

3. Snap/assemble both parts 3 to part 4 and after that to part 2 using a snap rivet.

4. Snap/assemble ﬁxed parts 3 and 4 to part 1 and 2 on the left side using a snap

rivet.

5. Snap all the free ends of the parts to part 1 and 2 on both sides using a snap

rivet.

Fig. 1 Mounting steps

Parts Step 1

Part 5

Part 1

Part 2

Part 3

Part 4

Part 1

Step 2 Step 3

Part 2

Part 1

Part 3

Part 2

Part 3

Part 4

Part 1

Step 4 Step 5

www.sentera.eu

MIW-AWP-EN-000 - 13 / 05 / 2022 5 - 5

back to the table of contents

AWP ALL-WEATHER PROTECTIVE

HOOD

Fig. 2 Mounting dimensions - ﬂush mounting

120 mm

127 mm

124 mm

130 mm

78 mm

64 mm

2 x Ø4 mm

4 x Ø5,5 mm

TRANSPORT AND STORAGE

Store in its original packaging in a dry and ventilated place, at a temperature around

20°C, away from light.

WARRANTY AND RESTRICTIONS

is warranty runs for two years from the delivery date for manufacturing defect.

Any modiﬁcation or alteration to the product releases the manufacturer from all

responsibility. e manufacturer bears no responsibility for any misprint or mistake

in this data, modiﬁcation or improvement to the product can be made at any time

after date of publication.

Sentera Controls AWP-10-13-13 Mounting Instruction

Brand: Sentera Controls

Model: AWP-10-13-13

Type: Mounting Instruction

Download PDF

report

Sentera Controls AWP-10-13-13 Mounting Instruction

Sentera Controls AWP-10-13-13 Mounting Instruction

Related papers

Other documents