AG Neovo PM-32 User manual

Brand: AG Neovo

Model: PM-32

Category: Public displays

Type: User manual

This manual is also suitable for

PM-43

PM-32, PM-43 & PM-55 LED-Backlit Display

User Manual

www.agneovo.com

SAFETY INFORMATION.......................................................................................................1

REGULATORY INFORMATION............................................................................................4

CHAPTER 1: UNPACKING AND INSTALLATION..............................................................11

1.1 Unpacking ....................................................................................................................... 11

1.2 Package Contents .......................................................................................................... 11

1.3 Installation Notes ............................................................................................................ 11

1.4 Mounting on a Wall .........................................................................................................12

1.4.1 VESA Grid............................................................................................................12

1.5 Using of Remote sensor and power indicator .................................................................13

CHAPTER 2: PARTS AND FUNCTIONS............................................................................14

2.1 Control Panel ..................................................................................................................14

2.2 Input/Output Terminals ....................................................................................................15

2.3 Remote Control ...............................................................................................................16

2.3.1 General functions ................................................................................................16

2.3.2 Inserting the batteries in the remote control ........................................................17

2.3.3 Handling the remote control ................................................................................17

2.3.4 Operating range of the remote control .................................................................17

CHAPTER 3: CONNECTING EXTERNAL EQUIPMENT....................................................18

3.1 Connecting External Equipment (DVD/VCR/VCD) .........................................................18

3.1.1 Using COMPONENT video input .........................................................................18

3.1.2 Using Video Source input ....................................................................................18

3.1.3 Using HDMI video input .......................................................................................19

3.2 Connecting a PC .............................................................................................................19

3.2.1 Using VGA input ..................................................................................................19

3.2.2 Using DVI input ....................................................................................................20

3.2.3 Using HDMI input.................................................................................................20

3.3 Connecting Audio Equipment .........................................................................................21

3.3.1 Connecting an external audio device ..................................................................21

3.4 ConnectingMultipleDisplaysinaDaisy-chainConguration .........................................21

3.4.1 Display control connection ...................................................................................21

3.5 IR Pass-through Connection ...........................................................................................22

3.6 Wire-connecting to Network ............................................................................................22

CHAPTER 4: OPERATION.................................................................................................23

4.1 Change Picture Format ...................................................................................................23

4.2 Play Multimedia Files ......................................................................................................23

4.2.1 Playlesfromcomputer ......................................................................................23

4.2.2 PlaymultimedialesfromUSBdevice ................................................................24

4.3 Play options ....................................................................................................................25

4.3.1 Playingmusicles ...............................................................................................25

4.3.2 Playingmovieles ...............................................................................................26

4.3.3 Playingphotoles ...............................................................................................27

TABLE OF CONTENTS

CHAPTER 5: CHANGE YOUR SETTINGS........................................................................28

5.1 Settings ...........................................................................................................................29

5.1.1 Picture menu........................................................................................................29

5.1.2 Sound menu ........................................................................................................30

5.1.3 General settings menu ........................................................................................31

5.2 Network Settings .............................................................................................................32

CHAPTER 6: USB DEVICE COMPATIBILITY....................................................................33

6.1 USBdevicecompatibility ................................................................................................33

CHAPTER 7: INPUT MODE...............................................................................................36

CHAPTER 8: PIXEL DEFECT POLOCY.............................................................................38

8.1 Pixels and Sub-Pixels .....................................................................................................38

8.2 TypesofPixelDefects+DotDenition...........................................................................38

8.3 BrightDotDefects ...........................................................................................................38

8.4 Dark Dot Defects ............................................................................................................39

8.5 Proximity of Pixel Defects ...............................................................................................39

8.6 Pixel Defect Tolerances ..................................................................................................39

8.7 MURA .............................................................................................................................40

CHAPTER 9: CLEANING AND TROUBLESHOOTING.....................................................41

9.1 Cleaning ..........................................................................................................................41

9.2 Troubleshooting ..............................................................................................................42

CHAPTER 10: TECHNICAL SPECIFICATIONS................................................................43

10.1 DisplaySpecications .....................................................................................................43

10.2 Display Dimensions ........................................................................................................44

TABLE OF CONTENTS

Warnings and Precautions

KNOW THESE SAFETY SYMBOLS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(ORBACK).NOUSERSERVICEABLEPARTSINSIDE.REFERSERVICINGTO

QUALIFIED SERVICE PERSONNEL.

This symbol indicates high voltage is present inside. It is dangerous to make any kind

of contact with any inside part of this product.

This symbol alerts you that important literature concerning operation and maintenance

has been included with this product.

CAUTION: FCC/CSAregulationsstatethatanyunauthorizedchangesormodicationstothis

equipment may void the user’s authority to operate it.

CAUTION: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert

the plug.

TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The Socket-outlet should be installed near the apparatus and be easily accessible.

Read and follow these instructions when connecting and using your Public

Information Display:

• Unplug the display if you are not going to use it for an extensive period of time.

• Unplug the display if you need to clean it with a slightly damp cloth. The screen

manybewipedwithadryclothwhenthepoweriso.However,neveruse

alcohol, solvents or ammonia-based liquids.

• Consult a service technician if the display does not operate normally when you

have followed the instructions in this manual.

• Thecasingcovershouldbeopenedonlybyqualiedservicepersonnel.

• Keep the display out of direct sunlight and away from stoves or any other heat

sources.

• Remove any object that could fall into the vents or prevent proper cooling of the

display’s electronics.

SAFETY INSTRUCTIONS

• Do not block the ventilation holes on the cabinet.

• Keep the display dry. To avoid electric shock, do not expose it to rain or excessive

moisture.

•Ifturningothedisplaybydetachingthepowercable,waitfor6secondsbefore

re-attaching the power cable for normal operation.

• To avoid the risk of shock or permanent damage to the set do not expose the

display to rain or excessive moisture.

• When positioning the display, make sure the power plug and outlet are easily

accessible.

• IMPORTANT: Always activate a screen saver program during your application. If a

still image in high contrast remains on the screen for an extended period of time,

it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is

a well-known phenomenon that is caused by the shortcomings inherent in LCD

technology. In most cases the afterimage will disappear gradually over a period

oftimeafterthepowerhasbeenswitchedo.Beawarethattheafter-image

symptom cannot be repaired and is not covered under warranty.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(includingampliers)thatproduceheat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plugdoesnottintoyouroutlet,consultanelectricianforreplacementoftheobsoleteoutlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Onlyuseattachments/accessoriesspeciedbythemanufacturer.

12. Useonlywiththecart,stand,tripod,bracket,ortablespeciedbythe

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Referallservicingtoqualiedservicepersonnel.Servicingisrequiredwhentheapparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

WARNING: Apparatusshallnotbeexposedtodrippingorsplashingandnoobjectslledwith

liquids, such as vases, shall be placed on the apparatus.

WARNING: The batteries (batteries installed) shall not be exposed to excessive heat such as

sunshine,reorthelike.

WARNING: The mains plug or appliance coupler is used as the disconnect device,the

disconnect device shall remain readily operable.

WARNING: Topreventthespreadofre,keepcandlesorotheropenamesawayfromthis

product at all times.

WARNING: Topreventinjury,thisapparatusmustbesecurelyattachedtotheoor/wallin

accordance with the installation instructions.

CAUTION: Theseservicinginstructionsareforusebyqualiedservicepersonnelonly.To

reduce the risk of electric shock,do not perform any servicing other than that

containedintheoperatinginstructionsunlessyouarequalitiedtodoso.

CAUTION: Excessive sound pressure from earphones and headphones can cause hearing

loss. Adjustment of the equalizer to maximum increases the earphone and

headphone output voltage and the sound pressure level. Therefore, to protect your

hearing, adjust the equalizer to an appropriate level.

ForUL/CULapplication:ForuseonlywithULListedWallMountBracketwithminimumweight/

load: W Kg

Model Name W (kg)

PM-32 9.2

PM-43 13.4

PM-55 22.2

ForCBapplication:Unitwithoutbaseweight:WKg.Theequipmentanditsassociatedmounting

means still remain secure during the test.(Used wall mounting kit as following table shown).

Model Name Wall Mount Grid Screw

PM-32 100x100, 200x200 M4x(10+X), X=thickness of wall mount plate

PM-43 400x400, 200x200 M6x(10+X), X=thickness of wall mount plate

PM-55 400x400, 400x200 M6x(10+X), X=thickness of wall mount plate

SAFETY INSTRUCTIONS

Federal Communications Commission (FCC) Notice (U.S. Only)

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Use only an RF shielded cable that was supplied with the display when connecting this display to a

computer device.

Topreventdamagewhichmayresultinreorshockhazard,donotexposethisappliancetorainor

excessive moisture.

THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN

INTERFERENCE CAUSING EQUIPMENT REGULATIONS.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

WARNING: This equipment is compliant with Class A of EN55032/CISPR 32. In a

residential environment this equipment may cause radio interference.

REGULATORY INFORMATION

Polish Center for Testing and Certication Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong

socket). All equipment that works together (computer, display, printer, and so on) should have the

same power supply source.

The phasing conductor of the room’s electrical installation should have a reserve short-circuit

protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).

Tocompletelyswitchotheequipment,thepowersupplycablemustberemovedfromthepower

supply socket, which should be located near the equipment and easily accessible.

Aprotectionmark“B”conrmsthattheequipmentisincompliancewiththeprotectionusage

requirements of standards PN-93/T-42107 and PN-89/E-06251.

REGULATORY INFORMATION

Electric, Magnetic and Electromagnetic Fields (“EMF”)

1. We manufacture and sell many products targeted at consumers, which, like any electronic

apparatus, in general have the ability to emit and receive electromagnetic signals.

2. OneofourleadingBusinessPrinciplesistotakeallnecessaryhealthandsafetymeasuresfor

our products, to comply with all applicable legal requirements and to stay well within the EMF

standards applicable at the time of producing the products.

3. We are committed to develop, produce and market products that cause no adverse health

eects.

4. Weconrmthatifitsproductsarehandledproperlyfortheirintendeduse,theyaresafetouse

accordingtoscienticevidenceavailabletoday.

5. We play an active role in the development of international EMF and safety standards, enabling

us to anticipate further developments in standardization for early integration in its products.

Information for U.K. only

WARNING - THIS APPLIANCE MUST BE EARTHED.

Important:

This apparatus is supplied with an approved moulded 13A plug.

To change a fuse in this type of plug proceed as follows:

1. Remove fuse cover and fuse.

2. FitnewfusewhichshouldbeaBS13625A,A.S.T.A.orBSI

approved type.

3. Retthefusecover.

Ifthettedplugisnotsuitableforyoursocketoutlets,itshould

becutoandanappropriate3-pinplugttedinitsplace.

If the mains plug contains a fuse, this should have a value of 5A.

If a plug without a fuse is used, the fuse at the distribution board

should not be greater than 5A.

NOTES: The severed plug must be destroyed to avoid a

possible shock hazard should it be inserted into a 13A socket

elsewhere.

How to connect a plug

The wires in the mains lead are coloured in accordance with the

following code:

BLUE-“NEUTRAL”(“N”)

BROWN-“LIVE”(“L”)

GREEN&YELLOW-“EARTH”(“E”)

1. The GREEN & YELLOW wire must be connected to the

terminalintheplugwhichismarkedwiththeletter“E”orby

the Earth symbol or coloured GREEN or GREEN & YELLOW.

2. TheBLUEwiremustbeconnectedtotheterminalwhichis

markedwiththeletter“N”orcolouredBLACK.

3. TheBROWNwiremustbeconnectedtotheterminalwhich

markedwiththeletter“L”orcolouredRED.

Beforereplacingtheplugcover,makecertainthatthecordgrip

is clamped over the sheath of the lead - not simply over the three

wires.

(A)

(B)

REGULATORY INFORMATION

China RoHS

中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有害物质的名称及含量。

零部件名称

有害物质

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr (VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

塑料外框 OOOOO O

后壳 OOOOO O

LCD

panel

CCFL X X O O O O

LED XOOOO O

电路板组件* XOOOO O

底座 OOOOO O

电源线 XOOOO O

其他线材 XOOOO O

遥控器 XOOOO O

*：电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、集成电路、连接器等。

本表格依据SJ/T 11364的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 标准规定的限量要求以下.

X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 标准规定的限量要求.

上表中打“X”的部件中，应功能需要，部分有害物质含量超出GB/T 26572规定的限量要求，但是符合欧盟

RoHS法规要求(属于豁免部分)。

10 环保使用期限

在产品本体上标示的该标志表示环境保护使用期限为10年。

电子信息产品的环境保护使用期限是指电子信息产品中所含的有害物质不会向外部泄漏或出现突然

变异，并且电子信息产品的用户在使用该电子信息产品时也不会对环境造成严重污染或对人体、财产

带来严重损害的期限。

在环境保护期限中，请按照使用说明书使用本产品。

本环境保护使用不覆盖易损件：电池。

《废弃电子产品回收处理管理条例》提示性说明

为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命终止时，请遵守国家废弃电器电子产

品回收处理相关法律规定，将其交给当地具有国家认可的回收处理资质的厂商进行回收处理。

REGULATORY INFORMATION

仅适用于非热带气候条件下安全使用:

汉文仅适用于非热带气候条件下安全使用。

蒙古文

藏文

维文

壮文

Dan hab yungh youq gij dienheiq diuzgen mbouj dwg diegndat haenx ancienz sawjyungh.

≤200

仅适用于海拔2000m以下地区安全使用:

汉文仅适用于海拔2000m以下地区安全使用。

蒙古文

藏文

维文

壮文

Hai dou gaxgonq, wngdang sien duenh denvasen bae.

汉文

“注意

如果电池更换不当会有爆炸危险

只能用同样类型或等效类型的电池来更换”

蒙古文

藏文

维文

壮文

“Louzsim

Danghnaeuz denyouz vuenh ndaej mbouj habdangq aiq miz gij yungyiemj fatseng bauqcaq

Cijndaejyunghgijdenyouzdoengzyienghloihhingzroxnaeuzdaengjyauqloihlhaenxvuenh”

汉文“接入本设备的有线网络天线必须与保护接地隔离,不然可能会引起着火等危险!”

蒙古文

藏文

维文

壮文

“Gij mizsienq vangjloz denhsen ciephaeuj bonj sezbi daeuj haenx itdingh aeu caeuq gij ciepdieg

baujhohdoxliz,mboujneaiqmizgijyungyiemjdawzfeizdaengj!”

REGULATORY INFORMATION

North Europe (Nordic Countries) Information

Placering/Ventilation

VARNING:FÖRSÄKRADIGOMATTHUVUDBRYTAREOCHUTTAGÄRLÄTÅTKOMLIGA,

NÄRDUSTÄLLERDINUTRUSTNINGPÅPLATS.

Placering/Ventilation

ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG

STIKKONTAKT ER NEMT TILGÆNGELIGE.

Paikka/Ilmankierto

VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA

HELPOSTI IRROTTAA PISTORASIASTA.

Plassering/Ventilasjon

ADVARSEL:NÅRDETTEUTSTYRETPLASSERES,MÅDUPASSEPÅATKONTAKTENE

FORSTØMTILFØRSELERLETTEÅNÅ.

End-of-Life Disposal

Your new Public Information Display contains materials that can be recycled and reused.

Specialized companies can recycle your product to increase the amount of reusable materials and

to minimize the amount to be disposed of.

Pleasendoutaboutthelocalregulationsonhowtodisposeofyourolddisplayfromyourlocal

dealer.

(For customers in Canada and U.S.A.)

This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal

regulations. For additional information on recycling contact www.eia.org (Consumer Education

Initiative)

Waste Electrical and Electronie Equipment-WEEE

Attention users in European Union private households

This marking on the product or on its packaging illustrates that, under European

Directive 2002/96/EG governing used electrical and electronic appliances, this

product may not be disposed of with normal household waste. You are responsible

for disposal of this equipment through a designated waste electrical and electronic

equipmentcollection.Todeterminethelocationsfordroppingosuchwasteelectrical

andelectronic,contactyourlocalgovernmentoce,thewastedisposalorganization

that serves your household or the store at which you purchased the product.

REGULATORY INFORMATION

Attention users in United States:

Please dispose of according to all Local, State and Federal Laws. For the disposal or recycling

information, contact: www.mygreenelectronics.com or www.eiae.org.

End of Life Directives-Recycling

Your new Public Information Display contains several materials that can be recycled

for new users.

Please dispose of according to all Local, State, and Federal laws.

REGULATORY INFORMATION

1.1. Unpacking

• This product is packed in a carton, together with the standard accessories.

• Any other optional accessories will be packed separately.

• Due to the size and weight of this display it is recommended for two people to move it.

• After opening the carton, ensure that the contents are complete and in good condition.

1.2. Package Contents

Please verify that you received the following items with your package content:

• LCD display

• Remote control with AAA

batteries

• Power cord (1.8 m)

• VGA cable (1.8 m)

• RS232 cable (1.8 m)

• User Manual

* The supplied power cord varies depending on destination.

Power Cord Video Signal Cable

(D-SUB to D-SUB Cable) User Manual

Remote Control

and AAA Batteries

RS232 Cable

NOTES:

• For all other regions, apply a power cord that conforms to the AC voltage of the power socket

and has been approved by and complies with the safety regulations of the particular country.

• You might like to save the package box and packing material for shipping the display.

1.3. Installation Notes

• Due to the high power consumption, always use the plug exclusively designed for this product. If

an extended line is required, please consult your service agent.

• Theproductshouldbeinstalledonaatsurfacetoavoidtipping.Thedistancebetweenthe

back of the product and the wall should be maintained for proper ventilation. Avoid installing the

product in the kitchen, bathroom or any other places with high humidity so as not to shorten the

service life of the electronic components.

• The product can normally operate only under 3000m in altitude. In installations at altitudes

above 3000m, some abnormalities may be experienced.

CHAPTER 1: UNPACKING AND INSTALLATION

1.4. Mounting on a Wall

To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially

available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678

standard in North America.

Protective Sheet

VESA Grid

Table

1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged,

beneath the screen surface so it will not be scratched.

2. Ensure you have all the accessories for mounting this display (wall mount, ceiling mount, table

stand, etc).

3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting

procedures could result in damage to the equipment or injury to the user or installer. Product

warranty does not cover damage caused by improper installation.

4. For the wall-mounting kit, use PM-32 for M4 and PM-43/PM-55 for M6 mounting screws (having

a length 10 mm longer than the thickness of the mounting bracket) and tighten them securely.

5. Unit without base weight= W Kg. The equipment and its associated mounting means still remain

secureduringthetest.ForuseonlywithULListedWallMountBracketwithminimumweight/

load: W Kg.

Model Name W (kg)

PM-32 9.2

PM-43 13.4

PM-55 22.2

1.4.1. VESA Grid

Model Name Vesa Grid

PM-32 100(H) x 100(V)mm / 200(H) x 200(V)mm

PM-43 200(H) x 200(V)mm / 400(H) x 400(V)mm

PM-55 400(H) x 200(V)mm / 400(H) x 400(V)mm

Caution:

To prevent the display from falling:

UNPACKING AND INSTALLATION

• For wall or ceiling installation, we recommend installing the display with metal brackets which

are commercially available. For detailed installation instructions, refer to the guide received with

the respective bracket.

• To lessen the probability of injury and damage resulting from fall of the display in case of

earthquake or other natural disaster, be sure to consult the bracket manufacturer for installation

location.

•

Ventilation Requirements for enclosure locating

To allow heat to disperse, leave space between surrounding objects as shown in the diagram

below.

100 mm 100 mm

100 mm

1.5. Using of Remote sensor and power indicator

1. Pull down the lens to have better remote control performance and easy to observe the light

information of power status

2. Push up the lens before mounting the display for video wall application

3. Pull/Push the lens until hearing the click sound

Push right to collapse the lens Push left to extend the lens

UNPACKING AND INSTALLATION

2.1. Control Panel

1 [ ] Power button

Use this button to turn the display on or put the display to standby.

2 [MUTE] button

Switch the audio mute ON/OFF.

3 [INPUT] button

Choose the input source.

Used as [ ] button in the On-Screen-Display menu.

4 [ ] button

Move the highlight bar up / Increase the adjustment while OSD menu is on, or increase the

audiooutputlevelwhileOSDmenuiso.

5 [ ] button

Move the highlight bar down / Decrease the adjustment while OSD menu is on, or decrease

theaudiooutputlevelwhileOSDmenuiso.

6 [ ] button

Move the highlight bar right to adjust the selected item while OSD menu is on.

7 [ ] button

Move the highlight bar left or return the selected item while OSD menu is on.

8 [MENU] button

Return to previous menu while OSD menu is on, or to activate the OSD menu when OSD menu

iso.

1 2 3 4 5 6 7 8

MUTE INPUT MENU

CHAPTER 2: PARTS AND FUNCTIONS

1 MAIN POWER SWITCH

Switchthemainpoweron/o.

2 AC IN

AC power input from the wall outlet.

3 PC LINE IN

Audio input from VGA source (3.5mm stereo

phone).

4 HDMI IN

HDMI video / audio input.

5 DVI-D IN

DVI-D video input.

6 VGA IN (D-Sub)

VGA video input.

7 Y/CVBS

Video source input.

8 AUDIO IN

Audio input from external AV device (RCA).

9 AUDIO OUT

Audio output to external AV device.

10 IR OUT / 11 IR IN

IR signal output /input for the loop-through

function.

NOTE:

• This display’s remote control sensor

will stop working if the jack [IR IN] is

connected.

• To remotely control your A/V device via

this display, refer to page for IR Pass

Through connection.

12 RJ-45

LAN control function for the use of remote

control signal from control center.

13 RS232 OUT / 14 RS232 IN

RS232C network output / input for the loop-

through function.

15 USB PORT

ConnectyourUSBstoragedevice.

16 Security LOCK

Used for security and theft prevention.

2.2. Input/Output Terminals

3 4

Y Pb Pr

1 6

1 0

1 1

1 2

1 3

1 4

1 5

LRL R I NO U TR J 4 5I N U S B

O U T

PARTS AND FUNCTIONS

2.3. Remote Control

2.3.1 General functions

1 [ ] POWER button

Turn the display on or put the display to

standby.

2 [PLAY] buttons

Controlplaybackofmediales.

3 [ ] SOURCE button

Choose input source. Press [ ] or [ ] button

to choose from USB, Network, HDMI, DVI,

YPbPr, AV, or VGA. Press [ ] button to

conrmandexit.

4 [ ] HOME button

Access the OSD menu.

5 ] LIST button

No function.

6 [ ] [ ] [ ] [ ] NAVIGATION buttons

Navigate through menus and choose items.

7 [ ] button

Conrmanentryorselection.

8 [ ] ADJUST button

Access currently available options, picture

and sound menus.

9 ] BACK button

Return to the previous menu page or exit

from the previous function.

10 [ ] [ ] VOLUME button

Adjust volume.

11 [ ] MUTE button

Presstoturnthemutefunctionon/o.

12 [ ] [ ] [ ] [ ] COLOR buttons

Choose tasks or options.

13 [NUMERIC] buttons

Enter text for network setting.

14 [ ] FORMAT button

Change picture format.

15 [ ] INFO button

Display information about current activity.

16 [ ] OPTIONS button

Access currently available options, picture

and sound menus.

PARTS AND FUNCTIONS

2.3.2 Inserting the batteries in the remote control

The remote control is powered by two 1.5V AAA batteries.

To install or replace batteries:

1. Press and then slide the cover to open

it.

2. Align the batteries according to the (+)

and (–) indications inside the battery

compartment.

3. Replace the cover.

Caution:

Theincorrectuseofbatteriescanresultinleaksorbursting.Besuretofollowtheseinstructions:

• Place“AAA”batteriesmatchingthe(+)and(–)signsoneachbatterytothe(+)and(–)signsof

the battery compartment.

• Do not mix battery types.

• Do not combine new batteries with used ones. It causes shorter life or leakage of batteries.

• Remove the dead batteries immediately to prevent them from liquid leaking in the battery

compartment. Don’t touch exposed battery acid, as it can damage your skin.

NOTE: If you do not intend to use the remote control for a long period, remove the batteries.

2.3.3 Handling the remote control

• Do not subject to strong shock.

• Do not allow water or other liquid to splash the remote control. If the remote control gets wet,

wipe it dry immediately.

• Avoid exposure to heat and steam.

• Other than to install the batteries, do not open the remote control.

2.3.4 Operating range of the remote control

Point the front of the remote control toward this

display’s remote control sensor when pressing a

button.

Use the remote control within a distance of less than

5m/16ft from this display’s sensor, and a horizontal

and vertical angle of less than 30 degrees.

NOTE: The remote control may not function

properly when the remote control sensor on

this display is under direct sunlight or strong

illumination, or when there is an obstacle in

the path of signal transmission.

30 30

PARTS AND FUNCTIONS

Page is loading ...

AG Neovo PM-32 User manual

Brand: AG Neovo

Model: PM-32

Category: Public displays

Type: User manual

This manual is also suitable for

PM-43

Download PDF

report

AG Neovo PM-32 User manual

This manual is also suitable for

AG Neovo PM-32 User manual

Related papers

Other documents