2. Workrite Ergonomics
  3. Solace Desktop

Workrite Ergonomics Solace Desktop Installation guide

  • Hello, I'm here to assist you with the Installation Instructions for the Sit-Stand Workstation. This document outlines the workstation's height and tilt adjustment mechanisms, along with its weight capacity limits. I've reviewed the instructions and am ready to address any questions you might have.
  • How do I adjust the height of the workstation?
    How do I adjust the keyboard tilt?
    What is the maximum weight capacity of the workstation?
22
Installation Instructions
DESKTOP SIT-STAND WORKSTATION
5230180 Rev. B
WEIGHT CAPACITY - A + B ≤ 35 lbs.
HEIGHT ADJUSTMENT
KEYBOARD TILT ADJUSTMENT
Squeeze levers on both sides simultaneously to move workstation up and down to
desired height. Release levers to lock the workstation into position. The product will
not be activated when squeezing only one lever.
While holding the tray, loosen knob slightly.
Set and hold tray at desired tilt angle and re-tighten knob.
B ≤ 5 lbs.
A ≤ 35 lbs.
!
Maximum weight capacity is 35 lbs. Serious
injury or property damage may occur if
maximum is exceeded.
Make sure all cord lengths are
sufficient to use with this product.
IMPORTANT INFORMATION
Lift the workstation out of the box, do not squeeze the levers until after the product is in place.
-10°/+10° tilt
/