2. SW-Motech
  3. LEH.06.039.114/S

SW-Motech LEH.06.039.114/S Mounting instructions

  • Hello! I've reviewed the provided document, which contains mounting instructions for the SW-MOTECH Handle Bar Riser designed for YAMAHA FJR 1300 models from 2001 to 2006. The document details two mounting configurations, each offering a height increase, and one offering a width increase with forward pivot. The manual also includes torque specifications for screw installation. Feel free to ask me anything about the installation or features.
  • What should I do with the screws removed from the motorcycle?
    What should I do if I don't know the correct torque?
    When should I check the screws?
Montagehinweise Mounting Instructions
SW-MOTECH GmbH & Co. KG
Ernteweg 8/10
35282 Rauschenberg
Germany
Tel. +49 (0) 64 25/8 16 8-00
Fax +49 (0) 64 25/8 16 8-10
[email protected]
www.sw-motech.com
SW-MOTECH products should be installed by a qualified,
experienced motorcycle technician. If you are unsure
of your ability to properly install a product, please
have the product installed by your local motorcycle
dealer. SW-MOTECH takes no responsibility for damages
caused by improper installation.
All screws, bolts and nuts, including all replacement
hardware provided by SW-MOTECH, should be tightened
to the torque specified in the OEM maintenance manual
for your motorcycle. If no torque specifications are
provided in the OEM maintenance manual, the following
torques may be used:
All screws, bolts and nuts should be checked after
driving the first 50 km to ensure that all are tightened
to the proper torque.
Medium strength liquid thread-locker (i.e., "Locktite")
should be used to secure all screws, bolts and nuts.
M6
M8
M10
9,6 Nm
23 Nm
46 Nm
M6
M8
M10
9,6 Nm
23 Nm
46 Nm
Alle vom Motorrad gelösten Schrauben sind gemäß
Herstellerangaben wieder zu montieren, oder mit von
SW-MOTECH gelieferten Schrauben zu ersetzen. Falls
nicht anderweitig definiert, diese Schrauben nach
Tabelle anziehen.
Gegebenenfalls Schrauben mit flüssiger
Schraubensicherung einkleben.
Prüfen Sie nach 50 km alle Verbindungen auf festen
Sitz.
1
LEH.06.039.014
Anzahl/Pcs. 2 (L/R)
Lenkererhöhung
Handle Bar Riser 2Innensechskantschraube
Hexagon Socket Screw
M8 x 40 DIN 912
Anzahl/Pcs. 6
!Original Schrauben verwenden.
Use original screws.
2
1
3Innensechskantschraube
Hexagon Socket Screw
M8 x 55 DIN 912
Anzahl/Pcs. 6
1
27 mm höher
15 mm breiter
4 Grad Drehung nach
Vorne
27 mm higher
15 mm wider
4 degree pivot to front
3
03
Konfiguration 1 / Configuration 1Montagemöglichkeit 2 / mounting facility 2
27 mm höher
27 mm higher
Allgemeine Betriebserlaubnis (ABE)
Bitte laden Sie nach Montage dieses SW-MOTECH
Produkts das dazugehörige ABE-Dokument von unserer
Internetseite herunter. Sollten Sie über keinen
Internetzugang verfügen, rufen Sie uns bitte an.
Tel. +49 (0) 64 25/8 16 8-00 · www.sw-motech.com
INFORMATION
LEH.06.039.114 Revision: 02
Lenkererhöhung YAMAHA FJR 1300 '01 – '06
Handle Bar Riser YAMAHA FJR 1300 '01 – '06
/