Qazqa Broom User manual

Category
Signal cables
Type
User manual
30 CM
STEP 3
STEP 2
Broom WL 2 Black
104924
OFF
STEP 1
2xE27 Max.40W
20
STEP 4
3X
20
I
8mm
Strip the wire to the indicated length (mm) ;different items require different length
When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
Take note of the symbols when connecting wires:
=Neutral =Live =Earth
11.
12. Meaning of symbols:
Connect using the spaciļ€ed cable; different items require different cable
The luminaire can be dimmed by wall switch
Only the self-shielded halogen lamp should be used with the luminaire
3x
min.0.75mm2
NL
  • Page 1 1
  • Page 2 2

Qazqa Broom User manual

Category
Signal cables
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI