TOA YS-4CF User manual

Brand: TOA

Model: YS-4CF

Type: User manual

This manual is also suitable for

TOA YS-4CF is a 4-pole XLR connector with a rated current of 10A. It is commonly used for connecting speakers and other audio equipment. The connector is made of high-quality materials and is designed to provide a reliable and durable connection.

The TOA YS-4CF is easy to install and can be used with a variety of cable types. It is also compatible with phantom power, making it ideal for use with condenser microphones.

Here are some of the possible use cases for the TOA YS-4CF:

Connecting speakers to a sound reinforcement system
Connecting microphones to a mixing console
Connecting audio equipment to a recording device

The TOA YS-4CF is easy to install and can be used with a variety of cable types. It is also compatible with phantom power, making it ideal for use with condenser microphones.

Here are some of the possible use cases for the TOA YS-4CF:

Connecting speakers to a sound reinforcement system
Connecting microphones to a mixing console
Connecting audio equipment to a recording device

INSTALLATION MANUAL

MICROPHONE CONNECTORS

SPEAKER CONNECTORS

YM-1J

YM-3CF, YM-3CM

YS-4CF, YS-4CM

1. SPECIFICATIONS

2. DIMENSIONS OF MOUNTING OPENING

3. APPLICABLE CABLES

4. CONNECTIONS

Model No. Connector Applicable connector Allowable current (AC) Accessories

YM-1J Double pole jack Single or double pole plug

Screw ........... 2

YM-3CF XLM-3-31PCH-R XLR-3-12C 3 A

YM-3CM XLM-3-32PCH-R XLR-3-11C 3 A

YS-4CF XLR-4-31-F77 XLR-4-12C 10 A

YS-4CM XLR-4-32-F77 XLR-4-11C 10 A

Applicable plate (common to above all models): YP-1AF Plate (optional)

XLM type and XLR type connectors are the products of ITT Corporation.

Plate

Electrical box

83.5 (3.29)

90 – 98

(3.54 – 3.86)

46 – 50

(1.81 – 1.97)

Mounting diagram Dimensions of mounting

opening

according to the mounting dimensions shown at left.

Note

When a low-voltage circuit and a low-power circuit are

housed in the same box, provide a partition to isolate them

from each other.

YM-1J, YM-3CF, YM-3CM Microphone vinyl cable, Cross-sectional area: 0.75 – 2.0 mm² (AWG 18 – 14)

YS-4CF, YS-4CM 600 V vinyl-insulated cable or equivalent, Diameter: 0.8 – 1.6 mm (AWG 20 – 14) or

Cross-sectional area: 0.9 – 2.0 mm² (AWG 17 – 14)

• Connection of balanced

double pole plug

• Connection of unbalanced

single pole plug

H (+)

C (–) C (–)

E (Shield)

H (+)

(Shield) (

–)

[YM-1J]

Short C and E.

H [USA type : – (C)]

C [USA type : + (H)]

E (Shield)

[YM-3CF]

[YS-4CF] [YS-4CM]

[YM-3CM]

H [USA type : – (C)]

C [USA type : + (H)]

E (Shield)

H: Hot

C: Cold

E: Shield

URL: http://www.toa.jp/

133-05-469-30

Traceability Information for Europe

Manufacturer:

TOA Corporation

7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo, Japan

Authorized representative:

TOA Electronics Europe GmbH

Suederstrasse 282, 20537 Hamburg,Germany

Unit: mm (in)

Notes

• For cables with sectional area of under 0.75 mm

, fold back their cores to increase the sectional area before connection.

• If a thick cable is used , the circuit board can be damaged when mounting the connector in an electrical box.

Take care that excessive force is not applied to the circuit board when mounting.

Note: As H, C, and E are shorted when not used, mixers or

amplifiers using phantom power cannot be used.

TOA YS-4CF User manual

Brand: TOA

Model: YS-4CF

Type: User manual

This manual is also suitable for

The TOA YS-4CF is easy to install and can be used with a variety of cable types. It is also compatible with phantom power, making it ideal for use with condenser microphones.

Here are some of the possible use cases for the TOA YS-4CF: