Aleratec 1:16 USB 3.0 Copy Tower 330110 Quick start guide
- Category
- Media duplicators
- Type
- Quick start guide
Quick Start Guide
Welcome!
Congratulations on your purchase of
an Aleratec 1:16 USB 3.0 Copy Tower,
considered by industry experts to be one
of the finest USB duplicators available.
The entire Aleratec team is committed to
providing you with courteous service. Our
knowledgeable staff will strive to make
owning and operating your new Aleratec
USB duplicator a pleasant experience.
This Quick Start Guide will lead you step-by-
step through the basic operation procedures
of your USB duplicator.
For more detailed information on configuring
the 1:16 USB 3.0 Copy Tower and applying
its various capabilities, please refer to the
User Guide on the included CD.
We appreciate your selection of our product,
and wish you great success and enjoyment
of your new USB duplicator.
Included Items
• 1:16 USB 3.0 Copy Tower
• Power Cord
• USB 3.0 Cable
• USB 3.0 Host Adapter
• Installation and Software CD
• Quick Start Guide (this document)
• Aleratec Registration Card
Product Features
The 1:16 USB 3.0 Copy Tower is a USB 3.0 and USB 2.0
flash drive duplicator.
• Computer connected USB flash drive duplicator
• SuperSpeed USB 3.0 technology
• Duplicates up to 16 USB 3.0 or USB 2.0 flash drives
simultaneously
• Duplicate directly from image files, flash drives or from
selected files and folders from your hard drive
• Easy-to-Use Aleratec Software Suite
• Comes with USB 3.0 PCIe host adapter and USB 3.0 cable
Key Items on the 1:16 USB 3.0 Copy Tower
1:16 USB 3.0 Copy Tower™ Part No. 330110
Power Button
USB 3.0/2.0
Slots (16)
USB 3.0/2.0
Connector
Voltage
Selector
Switch
Power Input
© 2012 Aleratec, Inc. 9851 Owensmouth Avenue / Chatsworth, CA 91311 U.S.A. Document Number: 330110_QSG_ENG_Rev-A
Specifications subject to change without notice.
Summary of Operation
Technical Support Addresses and Phone Numbers
• By e-mail: [email protected]
• By Telephone: 1-818-678-0484 – Skype: support.aleratec.com – or FAX: 1-818-678-0483
Technical Support Group can be reached 8:00 AM to 5:00 PM, Pacific Time, Monday through Friday, excluding
U.S. holidays.
Please try to call from a phone near your computer system.
• Access is available 24 hours a day, 365 days a year, via: www.aleratec.com
USB 3.0 Host Adapter Installation
1. Turn off and unplug the power cable from the
back of your computer.
2. Remove the cover to access the internal
hardware of your computer.
3. Locate a free PCI Express slot and remove the
metal cover plate on the rear of the computer
case. (Your new USB 3.0 Host Adapter will fit
and work with any PCI Express slot whether it
is a x1, x4, x8 or x16 slot. Performance may
vary with each slot.)
4. When installing the USB 3.0 Host Adapter, make
sure to fasten the bracket as documented in
your computer manufacturer’s documentation.
5. Be sure to connect the SATA power connector
from the power supply to the card as it does
require additional power to function properly.
6. Place the cover back onto your computer.
7. Reattach the power cable to your computer
and turn it back on.
Windows 7, Vista Driver Installation
1. Insert the Aleratec 1:16 USB 3.0 Copy Tower
Installation and Software CD into an available
CD/DVD drive of your computer.
2. Click on Install USB 3.0 Host Adapter Drivers
to install the drivers for your new USB 3.0 Host
Adapter.
3. Follow the on-screen prompts to complete the
installation.
Setup
1. Connect the USB 3.0 cable (included) to the USB port on the back of your
duplicator and to an empty USB 3.0 port on your computer. If you do not have
an available USB 3.0 port on your computer please see the section titled “USB
3.0 Host Adapter Installation” for information regarding the included USB 3.0
PCI Express dual port host adapter.
2. Check that the red Voltage Selector Switch on the back of the unit is set to the
proper voltage for your area.
3. Connect the included power cord to the power input on the duplicator and into
an available power outlet.
4. Insert the Aleratec 1:16 USB 3.0 Copy Tower Installation and Software CD into
an available CD/DVD drive of your computer.
5. Click on Install Aleratec USB Duplication Suite to install the duplication software.
6. Follow the on-screen prompts to complete the installation.
Data Copying
This section will introduce you to Data Copying. For complete details, please read the
Aleratec 1:16 USB 3.0 Copy Tower Software User Guide included on your Installation
and Software CD.
1. Choose “Data Copy Only” from the drop down menu of your Aleratec software
interface.
2. On the same screen, click “Add Files” to copy individual files or “Add Folder” to
copy an entire folder.
NOTE: Make sure that your selected data DOES NOT exceed the capacity of the
smallest flash drive that you are copying to. This will result in failure.
3. Click on the “Destination” tab to select each USB flash drive you want to copy to.
4. After selecting the destination drives, press “Start” to begin the duplication
process.
For best results we recommend reading the section titled “Port Training” on page
28 of the Aleratec 1:16 USB 3.0 Copy Tower Software User Guide included on your
Installation and Software CD.
-
1
-
2
Aleratec 1:16 USB 3.0 Copy Tower 330110 Quick start guide
- Category
- Media duplicators
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Aleratec 330110 User guide
-
-
-
-
Aleratec 330119 330119EU User guide
-
-
-
-
-
Aleratec 350142 User manual