Veridian 01-5022 User manual

m

H

g

M

D

Automatic

Digital Blood Pressure

Arm Monitor

INSTRUCTION MANUAL • ENGLISH & ESPA

Ñ

OL

Model 01-5021 (adult)

Model 01-5022 (large adult)

2 – ENGLISH

STOP!

PLEASE ENSURE YOU HAVE ALL OF THE FOLLOWING COMPONENTS

BEFORE USING YOUR DIGITAL BLOOD PRESSURE MONITOR.

IF YOU ARE MISSING ANY PARTS, INCLUDING INSERTS OR

INSTRUCTION MANUALS, DO NOT RETURN TO PLACE OF PURCHASE.

CONTACT CUSTOMER CARE AT 8663261313.

Digital Monitor 4 AA Batteries

Instruction Manual

Quick Start Guide

Blood Pressure Reading Tracking Log

FAQ Information Sheet

Canvas Storage Bag

m

H

g

M

Adult Arm Cuﬀ

or Large Adult

Arm Cuﬀ

ENGLISH – 3

Index

Care and Safety Information.................................................................................4-5

Introduction..................................................................................................................6

Features of Digital Blood Pressure Monitor...........................................................7

Getting Started.............................................................................................................8

Battery Installation and Replacement / AC Power ..............................................9

Setting Date and Time..............................................................................................10

Applying Your Blood Pressure Cuﬀ .................................................................11-12

Taking Your Blood Pressure Reading ..............................................................12-13

Interpreting your Results...................................................................................14-15

Memory Function......................................................................................................16

Care and Maintenance.............................................................................................17

Description of Device & Label Symbols ...............................................................18

Display Symbols.........................................................................................................19

Troubleshooting & Error Codes .......................................................................20-21

FCC Statement............................................................................................................22

Electromagnetic Compatibility........................................................................23-26

Specications .............................................................................................................27

Warranty......................................................................................................................28

Instrucciones en Español...................................................................................29-56

Toll-Free Customer Care Help Line: 1-866-326-1313

Monday – Friday 8:30 a.m. – 4:30 p.m. CST

Distributed by

Veridian Healthcare

1175 Lakeside Drive

Gurnee, IL 60031

www.veridianhealthcare.com

Made in China

#93-1045 11/14

4 – ENGLISH

Care & Safety Information

NOTE: Read all instructions and inserts included with this monitor carefully before use. The

following basic precautions are needed when using an electrical product.

CAUTION: Failure to read and observe all precautions could result in personal injury or

equipment damage.

Improper care or use of your blood pressure monitor may result in injury, damage to the unit

or ineﬀective treatment. Following these instructions will ensure the blood pressure monitor’s

eﬃcacy and long life.

GENERAL CAUTIONS AND WARNINGS

• Measurement results should be discussed with your physician or healthcare

professional; never self-diagnose or attempt treatment as this may be dangerous

• Intended for adult use only; this device is not approved for infant or child use

• Keep out of reach of children

• Do not use the unit if it has any damaged parts, if it has been submersed in water or

dropped

• If any abnormality occurs, discontinue use until the unit has been examined and repaired

• Only use included attachments and parts; do not use attachments from other brands or

models as these may not be properly calibrated for use with this device and may result in

measurement error

• This monitor may not be appropriate for individuals with serious arrhythmias; consult with

your physician for proper monitor use and evaluation.

• Check the blood circulation of the user before measurement

• Do not share the cuﬀ with an infected person.

• Do not disassemble the unit or attempt to repair it; substitution of a component diﬀerent

from that supplied may result in measurement error and will void manufacturer warranty

• Always follow local regulations for proper disposal of the monitor, cuﬀ and batteries

ENGLISH – 5

Care & Safety Information

OPERATING CAUTIONS AND WARNINGS

• Prolonged overination may cause congestion, swelling or bruising in some people

• Wait a minimum of 2 minutes between measurements (20-minutes is recommended);

excessive frequent measurements may restrict blood circulation

• Do not use this device while connected to any monitoring equipment on the same limb

• The application of the cuﬀ over a wound or inammation diseases

• Consult with your healthcare professional for guidance for use if you have any of the

following: intravascular shunt; mastectomy on the arm cooresponding to the

measurement side of the body

• If you experience any discomfort or an abnormality occurs, stop using the device

immediately; to stop the device during operation, press the POWER button and the cuﬀ

will automatically deate

• Operation outside of stated operating temperature may result in measurement error or

device malfunction; operation environment temperature is: 41°F – 104°F (5°C – 40°C);

Humidity: ≤90% RH

• Never use this unit while operating a vehicle or in the bathtub or shower

STORAGE CAUTIONS AND WARNINGS

• Storage outside of stated storage temperature may result in measurement error or device

malfunction; storage environment temperature is: -4°F – 131°F (-20°C – 55°C);

Humidity: ≤90% RH

• Keep the unit out of reach of small children

• Always keep the unit unplugged while not in use; remove the batteries if the unit will not

be used for an extended period of time

CLEANING CAUTIONS AND WARNINGS

• Never immerse the unit in water to clean as it may damage the unit

• Follow the ‘Cleaning and Maintenance’ portion of this manual for instruction on how to

clean and care for your monitor

6 – ENGLISH

Introduction

It is recommended that you rst seek the advice and recommendation of your

physician or healthcare professional when using home diagnostic devices, including

blood pressure monitors.

Automatic digital blood pressure monitors use the oscillometric method to electronically

measure your blood pressure. The monitor detects your blood’s movement through the artery

in your arm and converts the movements into a digital reading. The oscillometric method

does not require a stethoscope, making the monitor ideal for home use.

Blood pressure readings determined with this device are equivalent to measurements

obtained by a trained healthcare professional using the cuﬀ/stethoscope auscultation

method, within the limits prescribed by the American National Standard for Electronic or

Automated Sphygmomanometers.

Thank you for purchasing our Automatic Digital Blood Pressure Monitor. With

proper care and use, your monitor will provide you with many years of reliable

readings.

PLEASE READ THIS INSTRUCTION MANUAL

COMPLETELY BEFORE OPERATING THIS UNIT.

ENGLISH – 7

Details of the display and interpretation of the symbols are

included throughout this manual.

Features of Monitor

m

H

g

M

D

Arm Cuff

Digital Display

AC Adaptor Port

MEMORY

Recall Button

POWER

Button (on/off)

Tubing

Connector

Battery

Compartment

(underside)

8 – ENGLISH

Before Taking a Measurement

1. Your readings should only be interpreted by your physician or healthcare professional with

access to your individual medical history. Regular use of a home blood pressure monitor

will allow you to track and record your readings for discussion with your physician.

2. Conduct your measurement in a quiet place while seated in a relaxed position. Rest for 15

minutes before taking your reading. If an error occurs or you desire to take a second

reading, allow 15 minutes between readings for your blood vessels to return to normal.

3. Avoid smoking, eating, taking medication, alcohol, physical activity or any other stressful

activity for 30 minutes prior to taking a reading.

4. Always remove any jewelry or constrictive clothing that may interfere with the cuﬀ

placement.

5. Keep yourself and the monitor still during measuring; do not talk during the reading.

6. It is recommended that you take your readings as the same time each day to better

monitor any indications in your results.

7. Record your daily measurement on the included chart or some other written document to

share with your physician.

Getting Started

Variations in Blood Pressure

Blood pressure is inuenced by many factors and can change from moment to moment.

Normally, blood pressure is lowest during sleeping periods and rises during the day.

ENGLISH – 9

This unit comes complete with 4 AA batteries.

2

It is necessary to replace the batteries when the Low Battery symbol

appears on the display or when the display does not turn on after the POWER

button is pressed.

Replacing Battery, Fig. 1

1. Press down and lift the cover.

2. Insert or replace 4 AA batteries into the battery

compartment, ensuring to match the indicated

polarity symbols. Always use new batteries.

3. Replace the battery cover.

4. Dispose of batteries according to local disposal

and recycling regulations.

It is recommended to remove the batteries if the unit

will not be used for an extended period of time.

AC Power Adapter

An AC adapter is available separately for battery-free operation. The AC adapter

plugs into the side of the unit as shown, Fig. 2. Please remember to practice

common sense electrical safety precautions

while using the adapter. To order an AC adapter,

please see the enclosed order form.

AC Adapter Output: 6V DC 600mA

Battery Installation / AC Power

AC Adapter

Port

Fig. 2

-

+

Fig. 1

10 – ENGLISH

Setting the Date and Time

Date and time will default to factory settings, 12:00 a.m. 1M 1D, if you do not choose to set

the correct information.

1. When the unit is oﬀ, press and release both the POWER and M

button at the same time. The month will begin to ash, Fig. 1.

2. Press the M button to change until the desired number appears. To

scroll through the numbers quicker, hold down the M button as the

numbers advance.

3. Press the POWER button to conrm the month entry.

4. Next, the date will blink. Repeat steps 2 and 3 to set the date, then

hours, then minutes.

5. After setting the minutes, the unit will automatically exit out of the date/time setting

mode.

When the monitor is oﬀ, the date and time will still appear at the top of the screen.

The time is displayed in 24hr Military Time. This chart explains the time conversion.

Fig. 1

Military Time = Regular Time

1:00 = 1am 7:00 = 7am 13:00 = 1pm 19:00 = 7pm

2:00 = 2am 8:00 = 8am 14:00 = 2pm 20:00 = 8pm

3:00 = 3am 9:00 = 9am 15:00 = 3pm 21:00 = 9pm

4:00 = 4am 10:00 = 10am 16:00 = 4pm 22:00 = 10pm

5:00 = 5am 11:00 = 11am 17:00 = 5pm 23:00 = 11pm

6:00 = 6am 12:00 = 12pm 18:00 = 6pm 24:00 = 12am

IT IS NECESSARY TO SET THE DATE AND TIME FOR THE MONITOR EVERY TIME

BATTERIES ARE INITIALLY INSTALLED OR REPLACED.

ENGLISH – 11

Before applying your blood pressure cuﬀ, be sure you have selected the

appropriate size cuﬀ.

To determine the proper cuﬀ size, measure the circumference of your

left upper arm at the point midway between inside bend of your elbow

and your shoulder, Fig 1.

Adult Cuﬀ ts arm circumference 11-3/4” - 16-1/2” (30-42 cm)

Large Adult Cuﬀ ts arm circumference 16-1/2” - 18-7/8” (42-48 cm)

Additional cus are available for order on the enclosed order form.

If for any reason you are unable to or should not use your left arm,

please modify the instructions for cuﬀ application to your right arm.

Your physician can help you identify which arm is best for you to take

measurements from.

1. The cuﬀ should not be plugged into the monitor until after the cuﬀ is

applied to your arm.

2. Remove any constrictive clothing or jewelry that may interfere with

cuﬀ placement.

3. Be seated at a table or desk with your feet at on the oor and legs

uncrossed.

4. Position the cuﬀ on a solid surface with the tubing facing up and

away from you. The metal ring/bar on the cuﬀ should be to the left

of the tubing.

5. Open the cuﬀ by pulling or rolling the bottom of the cuﬀ to the right,

Fig 2. This should open the cuﬀ without fully unrolling it, creating a

cylinder. Do not extend the cuﬀ beyond the metal bar.

6. Insert your left arm into the created cuﬀ cylinder. Position the index

mark over the main artery on the inside of your arm, Fig 3, 4.

Applying Your Blood Pressure Cu

Fig. 2

Fig. 3

Fig. 1

PROPER CUFF FIT AND PLACEMENT IS CRITICAL IN OBTAINING ACCURATE BLOOD

PRESSURE MEASUREMENTS. PLEASE READ THESE INSTRUCTIONS CAREFULLY AND

CONSIDER CONSULTING WITH YOUR PHYSICIAN FOR FURTHER DIRECTION.

Fig. 4

Main Artery

12 – ENGLISH

Applying Your Blood Pressure Cu

Taking Your Blood Pressure Reading

Please read the preceding portions of this manual prior to taking your rst

reading.

Reminder, it is important to avoid smoking, eating, taking medication, alcohol

consumption or physical activity 30 minutes prior to taking a reading.

1. Position the monitor on a at, stable surface with the digital display in

view.

2. Insert the cuﬀ tubing connector into the port on the left side of your monitor, Fig 1.

3. Rest your elbow on a solid surface with your palm facing upward. Elevate your arm so that the

cuﬀ is at the same level as your heart, Fig 2. Relax your left hand.

m

H

g

M

D

Fig. 1

7. The bottom edge of the cuﬀ should be positioned approximately

one inch above the elbow joint, Fig 5.

8. The cuﬀ should t comfortably, yet snugly around your arm. You

should be able to insert one nger easily between your arm and the

cuﬀ.

The cuﬀ size is suitable for use when the vertical mark is within the

horizontal OK range. A diﬀerent size cuﬀ is needed if the mark is

outside the OK range.

If you are not comfortable with applying your cuﬀ, please seek the

assistance of another member of your household or work with your

physician to practice the cuﬀ application. Incorrectly applied cuﬀs may

result in inaccurate readings.

NOTE: You can stop the ination or deation process at any time by

pressing the POWER button.

Fig. 5

0.4”-0.8”/1-2cm

ENGLISH – 13

Taking Your Blood Pressure Reading

4. Press the POWER button to turn the unit on; the unit will run a

self-test, Fig 3.

5. The unit will briey display the last reading value for that memory

bank. If there is no previous measurement, the unit will display ‘0’

for all of the reading values, Fig 4.

6. The cuﬀ will automatically inate to approximately 190mmHg or

40 mmHg higher than the last systolic pressure reading store in

memory.

7. When the ination has reached optimum level, the display will begin to show the decreasing

pressure while you feel the pressure of the cuﬀ decrease.

8. Your blood pressure measurement and pulse will display simultaneously on the screen, Fig 5.

Both the systolic and diastolic readings will display at the same time.

9. The Hypertension Indicator will indicate your reading range in the left side of the display, Fig 6.

See page 15 for a chart interpreting the Hypertension Indicator results.

10. If an irregular heartbeat was detected during the reading, the Irregular Heartbeat Detector will

appear on the display, Fig 7. See page 14 for more information on the Irregular Heartbeat

Detector feature.

11. The reading will automatically be stored in memory, up to 60 readings.

12. Select POWER to turn the unit oﬀ and conserve energy and battery life. The unit will

automatically shut-oﬀ and revert to time/date mode after approximately 1 minute.

13. Disconnect the cuﬀ and tubing from the monitor prior to storing.

Fig. 3 Fig. 4

Fig. 5

Fig. 6

Fig. 7

m

H

g

M

D

Fig. 2

14 – ENGLISH

Interpreting Your Results

Irregular Heartbeat Detection

An irregular heartbeat is dened as a heartbeat rhythm that is more than 25% slower or 25%

faster than the average measurement detected while the monitor is conducting the

measurement. When this device detects an irregular rhythm two or more times during the

reading, the IHB symbol will appear on the display screen.

This monitor will operate if the icon appears, but the results may be compromised, especially

if this symbol appears often. Please consult with your physician or trained healthcare

professional for further information regarding an irregular heartbeat and if this symbol

appears frequently.

Pulse

Blood

Pressure

Normal Heartbeat

Irregular Heartbeat

Short

Beat

Long

Beat

Blood

Pressure

ENGLISH – 15

Interpreting Your Results

Hypertension Indicator

This unit features our unique Hypertension Indicator. The World Health Organization has

established globally accepted standards for the assessment of high or low blood pressure.

This chart can help you identify where your blood pressure measurements fall according to

WHO classication standards. This chart should only be considered as a guideline; always

consult with your physician to interpret your individual results. Never adjust your

medication(s) dosage, or severely alter your diet or exercise routine without consulting with

your physician.

m

H

g

M

D

The Hypertension

Indicator is

located on the

left side of the

display window

Stage 3 Hypertension

Systolic pressure: ≥ 180 mmHg

or

Diastolic pressure: ≥ 110 mmHg

Stage 2 Hypertension

Systolic pressure: ≥ 160-179 mmHg

or

Diastolic pressure: ≥ 100-109 mmHg

Stage 1 Hypertension

Systolic pressure: ≥ 140-159 mmHg

or

Diastolic pressure: ≥ 90-99 mmHg

High Normal

Systolic pressure: ≥ 130-139 mmHg

or

Diastolic pressure: ≥ 85-89 mmHg

Normal

Systolic pressure: ≥ 120-129 mmHg

or

Diastolic pressure: ≥ 80-84 mmHg

Optimal

Systolic pressure: < 120 mmHg

or

Diastolic pressure: < 80 mmHg

16 – ENGLISH

Memory Function

Recalling Measurements in Memory

You can recall up to 60 total measurements in memory. These

measurements can be shared with your physician or trained

healthcare professional.

1. Press and release the M (MEMORY) button. The unit will show

how many measurements are stored within the bank, Fig 1.

2. Press the M (MEMORY) button again to scroll through the

saved measurements. Measurements will appear on the

display from oldest to most current. All results for a given

measurement will display, including measurement results,

pulse rate, Hypertension Indicator icon and Irregular

Heartbeat alert (if applicable), Fig 2. After you’ve scrolled

through all the readings, the unit will automatically turn oﬀ.

3. When the number of readings exceeds 60, the oldest data will

be replaced with the new record.

Clearing Measurements from Memory

1. Press and release the M (MEMORY) button. The unit will

display how many measurements are stored within the bank.

2. Press and hold down the M (MEMORY) button until two

horizontal lines ash, Fig. 3. This indicates that all

measurements have been erased.

Fig. 2

Fig. 1

Fig. 3

ENGLISH – 17

Proper care and maintenance of your blood pressure monitor will help ensure long life for the

product; improper use of the monitor may void the included warranty.

Monitor Care and Maintenance

• Do not use any liquids on the monitor; use a soft, dry cloth to clean the monitor as needed

• Storage outside of stated storage temperature may result in measurement error or device

malfunction; storage environment temperature is:

4

o

F – 131

o

F (-20

o

C – 55

o

C) Humidity ≤90% RH

• Do not store in direct sunlight

• Always keep the unit unplugged while not in use; remove the batteries if the unit will not

be used for an extended period of time

• Do not attempt to disassemble your monitor; disassembling your monitor may void the

manufacturers warranty

• Do not subject the monitor to strong shocks; take care not to drop the monitor

• With proper care, the monitor will maintain performance for a minimum of 10,000

measurements or three years

• No component of this device can be maintained by the user; the circuit diagrams,

component part lists, descriptions, calibration instruction or other information which will

assist the user's appropriately qualied technical personnel to repair those parts of

equipment which are designated repairable can be supplied.

• It is recommended that monitor performance be reviewed every two years or after service

or repair; please contact your service provider or call customer care

Cuff Care and Maintenance

• The cuﬀ should not be submerged or washed in a washing machine, but may be spot

cleaned with a mild-detergent as needed; it is suggested that the cuﬀ be cleaned once a

month if the deviced is used daily

• Clean the cuﬀ thoroughly after every 200 uses or more frequently as needed

• To disinfect the cuﬀ, wipe the inside (skin contact side) of the cuﬀ lightly moistened with

70-90% ethyl rubbing alcohol and allow to air dry; it is suggested to disinfect the cuﬀ

frequently when used in clinical settings or if the cuﬀ is contaminated in any way

• Never attempt to iron or dry the cuﬀ; if the cuﬀ becomes wet, allow the cuﬀ to air dry

completely before use or storage

• With proper care, the cuﬀ will maintain performance for a minimum of 1000 measurements

Care and Maintenance

18 – ENGLISH

Description of Device and Label Symbols

Read This Manual—All included manuals should be read prior to first use

Warning—Symbol indicates a warning, prohibition or mandatory action that mitigates

a risk that is not necessarily obvious to the device operator

Typ e BF Applied Parts—Indicates that a part of this unit comes in contact with the pa-

tient in order to carry out it’s intended function; in the case of this device the cuff is the

Type BF Applied Part

Environment Protection—dispose of this product properly; consult with your local recy-

cling ordinances for proper recycling and disposal

Keep Dry—This device should be kept dry; never submerge the unit or cuff. Consult

with the Care and Maintenance section of this manual for information on cleaning your

monitor

Polarity Symbol—Polarity of D.C. power connector; note connector may not be included

with this device but is available for purchase with the included form

Symbol Meaning



2012



2012

ENGLISH – 19

Display Symbols

Symbol Meaning

Systolic Blood Pressure—The ‘top’ blood pressure result

Diastolic Blood Pressure—The ‘bottom’ blood pressure result

Milligrams of Mercury—Unit of blood pressure measurement for this device

Pulse Rate—Pulse rate per minute during the measurement

Low Battery—Battery is low and should be replaced

Down Arrow—The cuff is not properly wrapped or has too much air left in it; arrow

will cease flashing when the unit is ready for measurement

Up Arrow—A measurement error has occurred and the measurement should be

attempted again

Irregular Heartbeat Icon—An irregular heartbeat was detected during the

measurement

Memory Reading—Reading on display is a reading from a memory bank

Average—The display shows the average of the last three measurements in mem-

ory

Error– An error has occurred during the measurement

20 – ENGLISH

Troubleshooting – Error Codes

Display shows an

abnormal result

Display is blank

when power is on

No response

when POWER is

pressed or when

new batteries

have been loaded

Problem

Cuﬀ position was not correct or

was not tight enough

Body posture was not correct

during measurement

Speaking, excessive movement,

angry, excited or nervous

anxiety during measurement

Batteries may be expired or

installed improperly

Incorrect operation; possible

strong electromagnetic

interference

Apply the cuﬀ properly and attempt a

new measurement

Review the ‘Taking a Measurement’

portion of this manual and attempt a

new measurement

Wait a period of time and attempt a

new measurement after calm has

returned; do not speak or move during

measurement

Check the polarity of the batteries and

reinstall if necessary; replace batteries

with new batteries

Remove batteries and wait a minimum

of ve minutes; reinstall batteries and

attempt a new measurement

Possible Cause Solution

Page is loading ...

Veridian 01-5022 User manual

This manual is also suitable for

Veridian 01-5022 User manual

in other languages

Related papers

Other documents