Onyx BE150 User manual

Category
POS terminals
Type
User manual

This manual is also suitable for

Bedside Terminal BE150/180
BE150/180
15.6”/18.5” Bedside Terminal
Intel
®
Atom
TM
N270 Processor
High Performance
Low Power Consumption
Wide LCD with Multimedia
BE150/180 Manual 1
st
Edition
June. 2010
Bedside Terminal BE150/180
Copyright Notice
This document is copyrighted, 2010. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, nor
for any infringements upon the rights of third parties, which may
result from its use.
The material in this document is for product information only and
is subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, ONYX Healthcare Inc., assumes no liabilities resulting
from errors or omissions in this document, or from the use of the
information contained herein
ONYX Healthcare Inc. reserves the right to make changes in the
product design without notice to its users
Bedside Terminal BE150/180
Acknowledgments
Intel
®
and Atom™ N270 are registered trademarks of Intel
®
Corporation.
IBM, PC/AT, PS/2 are trademarks of International Business
Machines Corporation.
Microsoft
®
Windows is a registered trademark of Microsoft
®
Corporation.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
C&T is a trademark of Chips and Technologies, Inc.
UMC is a trademark of United Microelectronics Corporation.
ITE is a trademark of Integrated Technology Express, Inc.
SiS is a trademark of Silicon Integrated Systems Corp.
VIA is a trademark of VIA Technology, Inc.
All other product names or trademarks are properties of
their respective owners.
Bedside Terminal BE150/180
Packing List
Before you begin installing your Bedside Terminal, please make
sure that the following items have been shipped:
BE150 or BE180 Bedside Terminal.
VESA Mount Screws
Utility CD-ROM (Please insert the ONYX-BE150/180 CD-ROM
into external CD-ROM drive.) which Contains Users Manual
(in PDF format), Drivers and Utilities
If any of these items are missing or damaged, you should contact
your distributor or sales representative immediately.
Headquarters
Onyx Healthcare Inc.
2F, No.135, Lane 235, Pao-Chiao Rd.,
Hsin-Tien City, Taipei 231, Taiwan, R.O.C.
TEL: +886-2-8919-2188
FAX: +886-2-8919-1699
http://www.onyx-healthcare.com
Bedside Terminal BE150/180
Worldwide Offices:
Onyx Healthcare, USA Inc.
2663 Saturn street, Brea, CA 92821, USA
Tel : +1-714-996-1800
Fax: +1-714-996-1811
Onyx Healthcare EUROPE B.V.
Ekkersrijt 4002, 5692 DA Son, The Netherlands
Tel : +31-(0)499-462020
Fax: +31-(0)499-462010
Onyx Healthcare Technology GmbH
An der Trift65d
63303 Dreieich , Germany
TEL: +49-(0)61033-7479-00
Fax : +49-(0)61033-7479-49
Bedside Terminal BE150/180
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do not
use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it
or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified service
personnel should open the equipment.
Bedside Terminal BE150/180
14.
If any of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to
work according to the user’s manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15.
DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY DAMAGE
THE EQUIPMENT.
16.
External equipment intended for connection to signal
input/output or other connectors, shall comply with relevant UL /
IEC standard (e.g. UL 1950 for IT equipment and UL 60601-1 /
IEC 60601 series for systems – shall comply with the standard
IEC 60601-1-1, Safety requirements for medical electrical systems.
Equipment not complying with UL 60601-1 shall be kept outside
the patient environment, as defined in the standard.
Caution:
It may cause the danger of explosion if battery is incorrectly
replaced. Replace only with same or equivalent type recommended
by the manufacturer.
Bedside Terminal BE150/180
Classification
1. Degree of production against electric shock: not classified
2. Degree of protection against the ingress of water: IPX1
3. Equipment not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous oxide.
4. Mode of operation: Continuous
5. Type of protection against electric shock: Class I equipment
Bedside Terminal BE150/180
FCC
This device complies with Part 15 FCC
Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received including interference that may
cause undesired operation.
Bedside Terminal BE150/180
UL Module Description
BE150/180 AC modules are developed to
suitable for the Classification Mark
requirement
Bedside Terminal BE150/180
Safety Symbol Description
The following safety symbols are the further explanations for your
reference.
Medical equipment with respect to electric
shock, fire and mechanical hazards only in
accordance with UL 60601-1, and
CAN/CSA C22.2 NO. 601.1
Attention, consult ACCOMPANYING
DOCUMENTS.
Ground wire
Protective Ground wire.
Medical equipment with respect to electric
shock, fire and mechanical hazards only in
accordance with UL 60601-1, and
CAN/CSA C22.2 NO. 601.1
Bedside Terminal BE150/180
Contents
Chapter 1 General Information
1.1 Introduction .............................................................................1-2
1.2 Feature......................................................................................1-3
1.3 Application Concept Diagram................................................1-4
1.4 Specification.............................................................................1-5
1.5 Dimension...............................................................................1-10
Chapter 2 Hardware Installation
2.1 Safety Precautions ...................................................................2-2
2.2 A Quick Tour of the BE150/180.............................................2-3
2.3 Removing the rear maintenance cover ..................................2-6
2.4 Hard Disk Drive (2.5” HDD) Installation..............................2-7
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ...............................................3-2
3.2 Award BIOS Setup..................................................................3-3
3.3 Standard CMOS Features. .....................................................3-5
3.4 Advanced BIOS Features........................................................3-5
3.5 Advanced Chipset Features....................................................3-5
3.6 Integrated Peripherals.............................................................3-5
3.7 Power management Setup.......................................................3-5
3.8 PnP/PCI configuration............................................................3-6
3.9 PC Health Status......................................................................3-6
3.10 Frequency/Voltage control....................................................3-6
Bedside Terminal BE150/180
3.11 Load Fail-Safe Defaults.........................................................3-6
3.12 Load Optimized Defaults......................................................3-7
3.13 Set Supervisor/User Password..............................................3-7
3.14 Save & Exit Setup..................................................................3-8
3.15 Exit without saving................................................................3-8
Chapter 4 Driver Installation
4.1 Installation................................................................................4-2
4.2 Card Reader Driver Installation............................................4-3
4.3 Touch Screen Driver Installation...........................................4-4
4.4 Smart Card Driver Installation..............................................4-4
4.5 RFID Driver Installation.........................................................4-4
Appendix A Miscellanea
A.1 General Cleaning Tips...........................................................A-2
A.2 Cleaning Tools........................................................................A-3
A.3 Scrap Computer Recycling .................................................A-5
Bedside Terminal BE150/180
Chapter 1 General Information 1-1
General
Information
Chapter
1
Bedside Terminal BE150/180
Chapter 1 General Information 1-2
1.1 Introduction
—A bedside terminal solution for ultimate patient services that
boosts patient satisfaction and well-beings.
BE150/180 offers the highly scalable bedside infotainment solution
to enhance patient experiences within the hospital. Packaged with
renowned software solution partners, 15.6” BE150 and 18.5”
BE180 bedside terminals provides patients with capabilities like
Entertainment on Demand, Online Access, VoIP Phone, Nurse Call,
etc.
Clinical Applications
Ward, Nursing Station/Cart
Service Capabilities – BE150/180
Hospital Information Access –
Patient Record Access
Treatment Progress Reporting (i.e. Medical Charting)
Dietary/Meal Ordering Service
Monitoring/Communication –
Doctor Consultation by Video Conference
Internet Access
VoIP Telephone Access
Bedside Terminal BE150/180
Chapter 1 General Information 1-3
Entertainment on Demand
Video-on-Demand
TV/Radio Broadcasting
1.2 Feature
15.6”/18.5” Wide Color TFT LCD display
Intel® ATOM™ N270 Processor
Fanless & Compact Design
VoIP phone, Web Camera, and High Quality Speaker
Emergency Call/Nurse Call (Optional)
Multimedia Entertainment: TV, Game, VoIP, Web Radio
Mini PCI 802.11a/b/g Internal Wireless Antenna (optional)
Bedside Terminal BE150/180
Chapter 1 General Information 1-4
1.3 Application Concept Diagram
Bedside Terminal BE150/180
Chapter 1 General Information 1-5
1.4 Specification
Model Number
BE150/180
Model Description
15.6”/18.5” Low Power High Performance Bedside Terminal with
Multimedia
Main Specification
CPU Processor
Intel® Atom™ N270 1.6GHz Processor
LCD Controller
Intel®945GSE, Shared memory up to 224MB
System Memory
Up to 2GB DDRII 400/533/667
Display
BE150: 15.6” Wide Color TFT LCD
BE180: 18.5” Wide Color TFT LCD
OS Support
Windows® 7 (32 bit & 64 bit)
Windows® XP Pro
Windows® XP Embedded
Fedora Core
Expansion
Internal Mini PCI for WLAN (Optional)
TV Tuner Card (Optional)
Magnetic Stripe Reader (Optional)
Barcode Scanner (Optional)
VoIP Phone
Web Camera
Bluetooth
Bedside Terminal BE150/180
Chapter 1 General Information 1-6
Main Specification (Cont.)
Storage Disk Drive
1 x 2.5” HDD (SATA)
1 x Type II Compact Flash (internal on board
socket)
1 x Smart Card Reader
1 x Smart Card Reader/RFID Module (Optional)
Button
Brightness: “+” / ”-“; Sound: “+” / ”-“; LCD On/Off;
Barcode Trigger (optional) /Nurse Call Button
(optional)
Accessory
1 x Web Camera (1.3M Pixel)
2 x Alarm Light (Can be removed by request)
1 x Nurse Call Connector (optional)
1 x Buzzer (GPIO Controllable – On/Off/Volume)
Accessory (Optional)
1 x MSR (TTL Interface)
1 x Bottom Barcode Reader (RS-232 Interface)
1 x RFID (USB Interface shared with Smart
Card Reader)
Support Content
IP TV, Web Gaming, MPEG 2/3/4, Web Radio
I/O
Audio
1 x Line out / MIC in (GPIO controllable,
mute/volume)
USB
2 x External USB2.0 (on bottom I/O), 3 x Internal
USB2.0
Bedside Terminal BE150/180
Chapter 1 General Information 1-7
Serial port
1 x DIO Connector for Hardwire Nurse Call
Ethernet
1 x Gigabit Ethernet (Support WOL)
I/O (Cont.)
Video
1 x Video-in through TV Tuner Card (Optional)
Speaker
2 x 2W High Quality Speakers
LCD Specification
Model
BE150 Series BE180 Series
Display Type
15.6” Color TFT LCD 18.5” Color TFT LCD
Max. Resolution
1366 x 768
Max. Colors
16.7M
Dot Size (mm)
0.252 x 0.252 0.3 x 0.3
Luminance (cd/m
2
)
250 nits 300 nits
55/55(H right/Left)
View Angle
30/55 (V upper/lower)
Contrast Ratio
500:1 1000:1
Back Light MTBF
50,000 Hrs
Note:
All ONYX's LCD products are manufactured with High precision technology.
However, there are a small number of defective pixels in all LCD panels that are not
able to change color. This is a normal occurrence for all LCD displays from all
manufacturers and should not be noticeable or objectionable under normal
operation. ONYX LCD panels are qualified for industry standard conditions in the
following: total 7 dead pixels on a screen or if there are 3 within 1 inch square area of
each other on the display.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49

Onyx BE150 User manual

Category
POS terminals
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI