Acer P239HL Quick start guide

Brand: Acer

Model: P239HL

Type: Quick start guide

LCD monitor

LR60441



2*.

Attaching the monitor to the base

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

 Turn off the LCD monitor and unplug the power cord.

 Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely

damage it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform

servicing of any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor

outside this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances

occur:

 Monitor-to-PC signal cable is frayed or damaged.

 Liquid spills onto the LCD monitor or the monitor is exposed to rain.

 The LCD monitor or case is damaged.

Package contents

LCD

monitor

Power cord

VGA cable

(optional)

DVI cable Quick start

(optional) guide

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power

cord.

2. Connect the signal cable to the VGA and/or DVI-D (optional)

input socket of the monitor, and

output socket of the graphics card on the computer. Then

tighten the thumbscrews on the signal cable connector.

Insert the monitor power cable into the power port at the

back of the monitor.

Plug the power cords of your computer and your monitor

into a nearby electrical outlet.

External controls

English

</>

Minus / Plus If the OSD is active, press the Minus or Plus buttons to toggle between

the OSD options. If the OSD is inactive, press the Minus or Plus buttons

adjust the volume. (Optional)

Press to view the OSD. Press again to enter a selection in the OSD. OSD functions

LR60441





3&4

Attaching the monitor to the base

1 Remove the monitor base from the packaging and place it on a stable and level workspace.

2 Remove the monitor from the packaging.

3 Align the release button at the buttom of the monitor with the corresponding slot at the bottom of

the base. A clicking sound signifies that the monitor has been securely attached to the base.

Empowering a.When the OSD menu is active, this button will act as the exit key ( exit

Key OSD menu).

b.When the OSD menu is inactive, press this button to select scenario

mode.

Regulations and safety notices

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain

compliance with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B

limits may be attached to this equipment. Operation with non-certified peripherals is likely to result

in interference to radio and TV reception.

Disposal of waste equipment by user in private household in the European Union

This symbol on the product or on its packaging indicates that this product

must not be disposed of with your other household waste. Instead, it is your

responsibility to dispose of your waste equipment by handing it over to a

designated collection point for the recycling of waste electrical and electronic

equipment. The separate collection and recycling of your waste equipment at

the time of disposal will help to conserve natural resources and ensure that it is

recycled in a manner that protects human health and the environment. For more

information ab ut where you can drop off your waste equipment for recycling,

please contact your local city office, your household waste disposal service or the

shop where you purchased the product.

English

LR60441



Attaching the monitor to the base

ᅝ㺙ᰒ⼎

SPECIFICATION

LCD Panel

Driving system TFT Color LCD

Size

Pixel pitch 0.265mm(H) x 0.265mm(V)

Brightness 250cd/m

(Typical)

Contrast 100,000,000:1Max. (ACM)

Viewable angle 178° (H) 178° (V) (CR=10)

Response time 6ms (on/off)

Panel Type

Video R, G, B Analog Interface

H-Frequency 54.2KHz – 83.8KHz

V-Frequency 49-75Hz

Display Colors 16.7M Colors

Dot Clock 170MHz

Max. Resolution 1920 x 1080@60Hz

Plug & Play VESA DDCCI/DDC2B

Power consumption

@200cd/m

ON Mode

Sleep Mode 0.45W(typ.)

Off Mode 0.35W(typ.)

Input Connector

D-Sub

DVI-D 24pin (Only Dual-Input Model)

Input Video Signal

Analog:0.7Vp-p(standard), 75 OHM, Positive

Digital signal (Only Dual-Input Model)

Maximum Screen Size

Horizontal:509.76mm

Vertical:286.74mm

Power Source 100-240V~, 50/60Hz

Environmental

Considerations

Operating Temp: 5° to 35°C

Storage Temp: -20° to 60°C

Operating Humidity: 10% to 85%

Dimensions 543.6 (W) x 408.8(H) x 206.9(D)mm

Weight (N. W.)

Mechanism spec

Tilt: -5° to +25°

External

Controls:

Switch / Buttons

Power Button

Left(<) /Right(>)

MENU/ENTER

Auto/ Exit

E(Empowering) Key

Functions

Contrast

Brightness

ACM On\Off

Focus

Clock

H. Position

V. Position

(Warm) Color

(Cool) Color

RGB Color temperature

Language

OSD position. timeout

Auto configuration (only Analog input model)

Input signal Selection (only Dual input model)

DDCCI On/Off

Display information

Reset

Exit

* All specifications are subject to change without notice.

Regulatory Compliance

2 "W

Find manuals and other documents for your Acer

product on the official Acer support website.

Swivel: No

Height adjustment: No

Pivot: No

Detachable foot stand: Yes (by Release button)

21.9W(typ.)

IPS

4.0kg Unit (net)

Attaching the monitor to the base

ᅝ㺙ᰒ⼎఼ᑩᑻ

Acer LCD ᰒ⼎఼ᖿ䗳ܹ䮼ᣛफ (QSG)

䞡㽕ⱘᅝܼ乏ⶹ

䇋Ҩ㒚䯙䇏ϟ䴶ⱘՓ⫼䇈ᯢǄ

1. ⏙⋕ LCD ᰒ⼎఼ሣᐩ˖

 ݇䯁 LCD ᰒ⼎఼⬉⑤ˈᢨᥝ⬉⑤㒓Ǆ

 ᇚ䴲⒊㾷ᗻ⏙⋕⎆஋⋦ࠄᢍᏗϞˈ䕏䕏᪺ᣁሣᐩǄ

2. ϡ㽕ᇚ LCD ᰒ⼎఼ᬒ㕂೼に᠋䰘䖥Ǆᰒ⼎఼䙁ফ䲼⎟ǃফ╂៪䰇ܝⳈ᥹✻ᇘᯊৃ㛑ᇐ㟈Ϲ䞡ᤳണǄ

3. ϡ㽕ᣝय़ LCD ሣᐩǄ䖛ߚ⫼࡯ᣝय़ৃ㛑ᇐ㟈ᰒ⼎ሣ∌ЙᗻᤳണǄ

4. ϡ㽕ौϟᴎⲪ៪ᇱ䆩㞾㸠㓈ׂᴀᴎ఼Ǆᑨ⬅㒣䖛ᥜᴗⱘᡔᴃҎਬᠻ㸠৘⾡㓈ׂӏࡵǄ

5. ᇚ LCD ᰒ⼎఼ᄬᬒ೼⏽ᑺЎ -20e ࠄ 60e C ˄-4e ࠄ 140e F˅ⱘ᠓䯈ݙǄ೼ℸ㣗ೈП໪ᄬᬒ LCD

ᰒ⼎఼ᯊˈৃ㛑ᇐ㟈∌ЙᗻᤳണǄ

6. 㢹ߎ⦄ϟ߫ᚙᔶˈᑨゟेᢨᥝᰒ⼎఼⬉⑤ˈᑊϢ㒣䖛ᥜᴗⱘᡔᴃҎਬ㘨㋏˖

 ᰒ⼎఼Ϣ PC П䯈ⱘֵো㒓⺼ᤳ៪ᤳണǄ

 ⎆ԧ⑙ࠄ LCD ᰒ⼎఼Ϟ៪㗙ᰒ⼎఼䙁ফ䲼⎟Ǆ

 LCD ᰒ⼎఼៪ᴎ໇ᤳണǄ

⠽ક⏙ऩ

LCD

VGA DVI

ᇚᰒ⼎఼䖲᥹ࠄ䅵ㅫᴎ

1. ݇䯁䅵ㅫᴎ⬉⑤ˈᢨᥝ䅵ㅫᴎ⬉⑤㒓Ǆ

2. ᇚֵো㒓ⱘϔッ䖲᥹ࠄᰒ⼎఼ⱘ VGA ੠ / ៪ DVI-D ˄䗝䜡

ӊ˅䕧ܹᦦষˈ঺ϔッ䖲᥹ࠄ䅵ㅫ

ᴎ೒ᔶवⱘ

VGA

੠ / ៪

DVI-D˄䗝䜡ӊ˅

䕧ߎᦦষǄᢻ㋻ֵো㒓᥹༈Ϟⱘᣛᢻ㶎ϱǄ

ᇚᰒ⼎఼⬉⑤㒓ᦦܹᰒ⼎఼㚠䴶ⱘ⬉⑤ッষǄ

ᇚ䅵ㅫᴎ੠ᰒ⼎఼ⱘ⬉⑤㒓ᦦܹᮕ䖍ⱘ⬉⑤ᦦᑻǄ

LR60441



ᅝ㺙ᰒ⼎఼ᑩᑻ

LR60441



ᅝ㺙ᰒ⼎఼ᑩᑻ

໪䚼᥻ࠊ

㞾ࡼ 㞾ࡼ

ᰒ⼎ OSD ᯊˈᣝ

㞾ࡼ䗔ߎ OSDǄ㢹᳾ᰒ⼎ OSDˈᣝ㞾ࡼᯊᰒ⼎఼㞾ࡼӬ࣪ᰒ

⼎ԡ㕂ǃ㘮⛺੠ᰒ⼎ᯊ䩳Ǆ

</> ޣো / ࡴো

ᰒ⼎ OSD ᯊˈᣝ

ޣো៪ࡴোᣝ䪂ߛᤶ OSD 䗝乍Ǆϡᰒ⼎ OSD ᯊˈᣝޣো៪

ࡴোᣝ䪂䇗ᭈ䷇䞣Ǆ˄ৃ䗝˅

㦰ऩ OSD ࡳ㛑 ᣝϟᯊᶹⳟ OSDǄݡᣝϔ⃵䖯ܹ OSD Ёⱘ䗝ᢽ乍Ǆ

⬉⑤ᣝ䪂 ᠧᓔ / ݇䯁ᰒ⼎఼⬉⑤Ǆ㪱㡆㸼⼎Ꮖᠧᓔ⬉⑤Ǆ󰜭咘㡆㸼⼎໘Ѣᕙᴎ / 㡖㛑῵ᓣǄ

Empowering

ਉ

a. ᔧᰒ⼎ OSD 㦰ऩᯊˈℸᣝ䪂⫼԰䗔ߎ䬂˄䗔ߎ OSD 㦰ऩ˅

b. ᔧϡᰒ⼎ OSD 㦰ऩᯊˈᣝℸᣝ䪂䗝ᢽᮍḜ῵ᓣǄ

გט׶щБڦຍְ

⊼ᛣ˖ሣ㬑㒓㓚

Ϣ݊ᅗ䅵ㅫ䆒໛ⱘ᠔᳝䖲᥹ᖙ乏Փ⫼ሣ㬑ൟ㒓㓚ˈҹ⹂ֱヺড় EMC ㅵࠊ㽕∖Ǆ

⊼ᛣ˖໪䆒

া᳝㒣䅸䆕ヺড় B 㑻䰤ࠊⱘ໪䆒˄䕧ܹ / 䕧ߎ䆒໛ǃ㒜ッǃᠧॄᴎㄝ˅ৃҹ䖲᥹ࠄᴀ䆒໛Ǆ㢹Ϣ݊ᅗ᳾㒣

䅸䆕ⱘ໪䆒݅ৠՓ⫼ˈৃ㛑Ӯᑆᡄ᮴㒓⬉Ϣ⬉㾚ⱘ᥹ᬊǄ

ᑳᓗᣛᇐ䇈ᯢ

ᑳᓗᯊˈϡ㽕ᇚℸ⬉ᄤ䆒໛϶ܹൗഒㆅЁǄ

Ўޣᇥ∵ᶧҹ֓೼᳔໻⿟ᑺϞֱᡸܼ⧗⦃๗ˈ䇋ಲᬊℸ䆒໛Ǆ

᳝݇ Waste from Electrical and Electronics Equipment (WEEEˈᑳᮻ⬉⇨੠⬉⇨䆒໛˅

ⱘㅵ⧚㾘ᅮˈ䇋䆓䯂˖

http://www.acer-group.com/public/Sustainability

ㆴḻݽ

৿࿒፩ၭ

LR60441



LR60441



ᑒ஀ኁጒ

3&4

1&2

૽ㆴḻݽમ⡶ᅠಎಚ

ḍ᥂Ё೑ǉ⬉ᄤֵᙃѻક∵ᶧ᥻ࠊㅵ⧚ࡲ⊩Ǌˈㅔ⿄ǉㅵ⧚ࡲ⊩Ǌ៪ǉChina RoHSǊП㾘ᅮˈ߫ߎᅣ碁⬉

ᄤֵᙃѻકЁৃ㛑৿᳝ⱘ᳝↦៪᳝ᆇ⠽䋼ⱘৡ⿄੠ঞ৿䞣Ѣҹϟ㸼ḐЁǄ

ᴀ㸼䗖⫼Пѻકᰒ⼎఼˄⎆᱊ঞ CRT˅ǃᑇᵓ⬉㾚˄⎆᱊ঞㄝ⾏ᄤ˅ǃⲥ㾚఼Ǆ

᳝↦᳝ᆇ⠽䋼៪ܗ㋴

ᰒ⼎఼˄⎆᱊ঞ CRT˅

䳊䚼ӊৡ⿄

᳝↦᳝ᆇ⠽䋼៪ܗ㋴

䪙˄Pb˅∲˄Hg˅䬝˄Cd˅ ݁Ӌ䫀

˄Cr6+˅

໮⒈㘨㣃

˄PBB˅

໮⒈Ѡ㣃䝮

˄PBDE˅

䞥ሲ㒧ᵘӊ h ƻ ƻ ƻ ƻ ƻ

ล᭭㒧ᵘӊ ƻ ƻ ƻ ƻ ƻ ƻ

⬉䏃ᵓ㒘ӊ * hƻƻƻ ƻ ƻ

⎆᱊ᰒ⼎ሣ / ♃ㅵ hƻƻƻ ƻ ƻ

⬉⑤῵ഫ h ƻ ƻ ƻ ƻ ƻ

⬉⑤㒓 ƻ ƻ ƻ ƻ ƻ

໪䚼ֵো䖲᥹㒓 h ƻ ƻ ƻ ƻ ƻ

୛ু ƻƻƻƻ ƻ ƻ

*˖ ⬉䏃ᵓ㒘ӊࣙᣀॄࠋ⬉䏃ᵓঞ݊ᵘ៤ⱘ䳊䚼ӊˈབ⬉䰏ǃ⬉ᆍǃ䲚៤⬉䏃ǃ䖲᥹఼ㄝ

ƻ˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼ǉ⬉ᄤֵᙃѻકЁ᳝↦᳝ᆇ⠽䋼ⱘ䰤䞣㽕∖ᷛޚǊ㾘ᅮⱘ䰤䞣

㽕∖ҹϟ

h˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥᄬ೼Ѣ䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёˈᰃ಴ЎⳂࠡϮ⬠䖬≵᳝៤❳ⱘৃ᳓ҷᡔᴃˈҹ㟈৿䞣㱑✊䍙

ߎǉ⬉ᄤֵᙃѻકЁ᳝↦᳝ᆇ⠽䋼ⱘ䰤䞣㽕∖ᷛޚǊ㾘ᅮⱘ䰤䞣㽕∖˗Ԛҡ✊ヺড়⃻ⲳ RoHS ᣛҸ᠔ᆍ䆌ⱘ䈕໪ᴵℒঞ⬉∴

ᣛҸⱘ㽕∖Ǆ

ȖࠆඳݢධݢᏊٛ൰ই༆ۃ୲࣏୲࿢ஂȗ࿎໯ᄹངಖ

ၓம࢑औݓ࣋Փঽ֦॓ݓฉˈܬቂॖ኶ᅍᇋۨٛ൰ডٛ൰༊ಛ፮ፒ໢ˈขᏨ༉࣭য়ࠆඳݢධݢᏊٛ൰ই

༆ۃ୲ყ࣋ߟఊߟࣙˈਖඝਦࢍܬݓન቏࣭য়ไ૰ܿই༆ۃ୲Ꮑ፣ܿ٦ຟ੣ᄵই༆ۃ୲ȃ

ㆴḻݽ

৿࿒፩ၭ

LR60441



LR60441



ᑒᑒ஀ኁጒ

ಝ૩ˊځܫ᫹Ǆᑒຬ஀࿾ಉ᝵ኡဤҜ෵ǅᴠన௠ᇛٛታԿ̲ʱᜩථᴮ

ᑒຬ஀࿾FG: !

Е᪺ྷঊᑒᏥ: 

ᑒຬኁጒ  ጒ

ᑒ஀ಉс *%

૽ㆴḻݽમ⡶ᅠಎಚ

৿࿒፩ၭ

English

1&2

Auto Auto If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive,

press Auto and the monitor will automatically optimize the display

position, focus, and clock of your display.

Power button Turns the monitor on/off. Blue indicates power on. Amber indicates

standby/ power saving mode.

㾘Ḑ

LCD 䴶ᵓ

偅ࡼ㋏㒳 TFT ᔽ㡆 LCD

ሎᇌ

ڣ㋴⚍䎱 0.265(H) x 0.265(V)mm

҂ᑺ 250cd/m

( ݌ൟؐ )

ᇍ↨ 100,000,000:1Max. (ACM)

ৃ㾚㾦ᑺ 17e (H ) 1 e R=10)

ડᑨᯊ䯈 ms ( ᓔ / ݇ )

䴶ᵓ㉏ൟ

㾚乥 RǃGǃB ῵ᢳ᥹ষ

∈ᑇ乥⥛ Hz – 83.8KHz

ൖⳈ乥⥛ Hz

ᰒ⼎买㡆᭄ 16.7 ⱒϛ㡆

⚍ᯊ䩳 170MHz

᳔໻ߚ䕼⥛ 1920 x 1080@60Hz

ेᦦे⫼ VESA DDCCI/DDC2B

ࡳ㗫

@200cd/m

ᓔਃ῵ᓣ ݌ൟؐ )

ӥ⳴῵ᓣ 0.45W( ݌ൟؐ )

݇䯁῵ᓣ

䕧ܹ᥹ষ

D-Sub

DVI-D 24 䩜˄ҙ䰤Ѣঠ䕧ܹൟো˅

䕧ܹ㾚乥ֵো

῵ᢳ˖

0.7Vp-p ˄ᷛޚ˅ǃ75 ⃻ྚǃℷᵕᗻ

᭄ᄫֵো˄ҙ䰤Ѣঠ䕧ܹൟো˅

᳔໻ሣᐩሎᇌ

∈ᑇ : mm

ൖⳈ :2mm

⬉⑤ 100-240V~, 50/60Hz

⦃๗ᴵӊ

Ꮉ԰⏽ᑺ˖5e C ࠄ 35e C

ᄬټ⏽ᑺ˖-20e C ࠄ 60e C

Ꮉ԰⑓ᑺ˖10% ࠄ 85%

໪ᔶሎᇌ 543.6 (W) x 408.8(H) x 206.9(D)mm

䞡䞣˄ޔ䞡˅ ᴀᴎ ޔ䞡 )

ᴎẄ㾘Ḑ

ؒ᭰ : -5eࠄ +25e

໪䚼

᥻ࠊ

ᓔ݇ / ᣝ䪂

⬉⑤ᣝ䪂

Ꮊ (<) / ে (>)

㦰ऩ / ⹂ᅮ

㞾ࡼ / 䗔ߎ

E(Empowering) 䬂

ࡳ㛑

ᇍ↨

҂ᑺ

ACM ᓔ / ݇

㘮⛺

ᯊ䩳

∈ᑇԡ㕂

ൖⳈԡ㕂

˄ᱪ˅㡆

˄ދ˅㡆

RGB 㡆⏽

䇁㿔

OSD ԡ㕂䍙ᯊ

㞾ࡼ䜡㕂˄ҙ䰤Ѣ῵ᢳ䕧ܹൟো˅

䕧ֵܹো䗝ᢽ˄ҙ䰤Ѣঠ䕧ܹൟো˅

DDCCI ᓔ / ݇

ᰒ⼎ֵᙃ

䞡㕂

䗔ߎ

* ᠔᳝㾘Ḑབ᳝ব᳈ˈᘩϡ঺㸠䗮ⶹǄ

ㅵࠊ䅸䆕

ᰒ⼎఼

৿࿒፩ၭ

23"W

FP

೼ᅬᮍⱘ Acer ᬃᣕ㔥キϞᶹᡒ Acer ѻકⱘ᠟ݠঞ݊ᅗ᭛ḷǄ

ᮟ䕀 : ৺

催ᑺ䇗ᭈ : ৺

ᵶ䕈

: ৺

ৃߚ⾏ᑩᑻ˖ᰃ ˄ᣝ䞞ᬒᣝ䪂˅

21.9W(

509.76

0.35W( ݌ൟؐ )

78 (V) (C

IPS

54.2K

49-75

4.0kg (

the VGA and/or DVI-D (optional)

Acer P239HL Quick start guide

Acer P239HL Quick start guide

Acer P239HL Quick start guide

Related papers

Other documents