Acer P5205 Quick start guide

Type
Quick start guide

This manual is also suitable for

Acer P5205, the multimedia projector, features various connectivity options, including VGA, HDMI, and RS232 ports. It delivers stunning visuals with its DLP technology and supports multiple video formats, making it suitable for presentations, movies, and gaming. Additionally, the projector offers flexible installation with its adjustable zoom and focus, allowing you to project images from different distances and angles.

Acer P5205, the multimedia projector, features various connectivity options, including VGA, HDMI, and RS232 ports. It delivers stunning visuals with its DLP technology and supports multiple video formats, making it suitable for presentations, movies, and gaming. Additionally, the projector offers flexible installation with its adjustable zoom and focus, allowing you to project images from different distances and angles.

INSTALLATION
CONNECTEUR INTERFACE
Remarque : l'interface connecteur est soumis aux spécifications du modèle
1
RS232
RBG
RBG
HDTV adapter
D-Sub
RS232
D-Sub
7
D-Sub
D-Sub
2
8
5
5
6
4
5
2
1
Y
R
R
L
L
R
9
3
Y
10
10
L
2
E62405SP
R
Quick Start
INSTALLATION
1. Power cord
2. VGA cable
3. VGA to component video/HDTV
adapter
4. Composite video cable
5. Audio cable
6. S-Video cable
7. RS232 cable
8. HDMI cable
9. 3 RCA component cable
10. RJ45 cable
Note: Connector interface is subject to model's specifications
INTERFACE CONNECTOR
1. Ensure the projector and your
computer are turned off.
2. Connect one end of the VGA cable to
the "VGA IN 1" or "VGA IN 2"
connector on the projector; connect
the other end to the VGA connector
on the computer and tighten the
screws.
3. Connect one end of the power cord
into the AC power socket on the
projector; connect the other end to an
electrical outlet.
1. Remove the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run your presentation.
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fans shut
down.
Démarrage rapide
INSTALLATION
1. Cordon d'alimentation
2. Câble VGA
3. Adaptateur VGA vers Composant
vidéo/HDTV
4. Câble Vidéo Composite
5. Câble audio
6. Câble S-Vidéo
7. Câble RS232
8. Câble HDMI
9. Câble de composant 3 RCA
10. Câble RJ45
Remarque : l'interface connecteur est soumis aux spécifications
du modèle
CONNECTEUR INTERFACE
1. Assurez-vous que le projecteur et
votre ordinateur sont hors tension.
2. Connectez une extrémité du câble
VGA au connecteur "VGA IN 1" ou
"VGA IN 2" sur le projecteur ;
branchez l'autre extrémité du
connecteur VGA à l'ordinateur puis
serrez les vis.
3. Branchez l'une des extrémités du
cordon d'alimentation dans la prise
d'alimentation CA du projecteur ;
branchez l'autre extrémité dans une
prise électrique.
1. Enlevez le protège-objectif.
2. Allumez d'abord le projecteur et
ensuite l'ordinateur.
3. Ajustez la position, la mise au point
et le zoom.
4. Lancez votre présentation.
1. Appuyez deux fois sur le bouton
Marche/Arrêt.
2. Ne débranchez pas le cordon
d'alimentation CA de la prise tant
que les ventilateurs du projecteur
fonctionnent.
1
2
Connecting to a Computer
Powering On the Projector
Powering Off the Projector
1
2
Connexion à un ordinateur
Mise sous tension du projecteur
Mise hors tension du projecteur
English Français
  • Page 1 1
  • Page 2 2

Acer P5205 Quick start guide

Type
Quick start guide
This manual is also suitable for

Acer P5205, the multimedia projector, features various connectivity options, including VGA, HDMI, and RS232 ports. It delivers stunning visuals with its DLP technology and supports multiple video formats, making it suitable for presentations, movies, and gaming. Additionally, the projector offers flexible installation with its adjustable zoom and focus, allowing you to project images from different distances and angles.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages