Samsung HG32ND450SG Quick start guide

Samsung
Brand
Samsung
Model
HG32ND450SG
Category
LCD TVs
Type
Quick start guide

Samsung HG32ND450SG 32-inch LED TV offers a captivating viewing experience with its 1366 x 768 resolution display. Enjoy immersive sound with its dual 5W speakers. Easily access a wide range of content with its built-in digital TV tuner and multiple ports, including HDMI, USB, and audio out. Mount it on a wall or place it on a tabletop using the included stand.

Samsung HG32ND450SG 32-inch LED TV offers a captivating viewing experience with its 1366 x 768 resolution display. Enjoy immersive sound with its dual 5W speakers. Easily access a wide range of content with its built-in digital TV tuner and multiple ports, including HDMI, USB, and audio out. Mount it on a wall or place it on a tabletop using the included stand.

To register this product please visit
www.samsung.com/register.
Quick Setup Guide
Wall Mount Kit Specications (VESA)
Wall mount Adapter
(Depending on the Model)
Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV.
Install your wall mount on a solid wall perpendicular to the oor. If you are attaching the wall mount to building materials other
than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe
personal injury.
➣ Standard dimensions for wall mount kits are shown in the table below.
➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
➣ Do not use screws that do not comply with the VESA standard screw specications.
➣ Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specications. Screws that are too long may cause damage to the inside of the TV set.
➣ For wall mounts that do not comply with the VESA standard screw specications, the length of the screws may differ
depending on the wall mount specications.
➣ Do not fasten the screws too rmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
➣ Samsung is not liable for product damage or personal injury when a non-VESA or non-specied wall mount is used or the
consumer fails to follow the product installation instructions.
➣ Do not mount the TV at more than a 15 degree tilt.
➣ Always have two people mount the TV onto a wall.
Product
Family
TV size in inches
VESA screw hole specs (A * B)
in millimeters
Standard Screw
(Length* Pitch in mm)
Quantity
LED-TV 32 200 X 200 M8 4
Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric
shock.
STOP
Please do not return
this unit
If you are having problems operating this TV,
Please call;
ARGENTINE:0800-333-3733
web site:
www.samsung.com/ar/support
BN68-07039M-00
Licence
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535,
6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and
7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201,
5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240,
7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are
registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights
Reserved.
The terms HDMI and HDMI High-De nition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
DivX Certied® to play DivX® video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofcial
DivX Certied® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information
and software tools to convert your les into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered in order to play purchased DivX Video-on-
Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under
license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source License Notice is written only English.
Specications
Environmental onsiderations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Model Name HG32ND450S
Display Resolution 1366 x 768
Screen Size
(Diagonal)
32” Class
(31.5” measured diagonally)
Sound (Output) 5W x 2
Dimensions (WxDxH)
Body
With stand
745.4 x 69.0 x 442.2 mm
745.4 x 150.5 x 466.6 mm
Weight
Without Stand
With Stand
3.73 kg
3.82 kg
➣ Design and specications are subject to change without prior notice.
➣ This device is a Class B digital apparatus.
WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
Dimensions
HG32ND450S
1
2
3 4 5 6
8
7
9
(unit: mm)
1 2 3 4 5 6 7 8 9
HG32ND450S 745.4 699.7 394.3 433.9 442.2 466.6 37.3 69.0 150.5
Hotel Plug & Play
The Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock Setup, and
Picture Mode Setup, runs once when power is rst turned ON. Setup also runs automatically after you have executed a Service
Reset.
♦ Local Set OSD
– Initially highlighted: ARG_DTV
– If you press the Enter key after selecting Change, you
can change the country.If the country is changed, the
TV automatically turns off and on.
– If you select the incorrect country,execute Factory Reset
again after entering the Factory menu.
– If you don`t want to change the country,select skip.
♦ Easy Set Up OSD
– Initially highlighted: Standalone Setup
– If you select the Standalone Only button, Standalone
hospital mode is set by default and the “Standalone
mode has been set” OSD appears for 3 seconds.
– TV enters into RF mode automatically after displaying
the “Standalone mode has been set” OSD for 3
seconds.
– If you select Standalone Setup mode, the “Select your
Language” OSD appears
♦ Select your Language OSD
– Initially highlighted: Español
– Display time: OSD time out and operation are the same
as Samsung’s consumer TV models.
– If you press the Enter key, the “Configure your TV” OSD
appears.
♦ Congure your TV OSD
– Initially highlighted: Standard.
– The TV displays the Picture Mode OSD where you can
choose Dynamic or Standard Picture mode.
♦ Auto Program Mode OSD
– If you press the Enter key, the TV automatically
searches for channels.
♦ Set Clock Mode and Time Zone OSD
– Initially highlighted: Clock Mode : Auto, Time Zone :
South and Southeast
– If the TV will be tuned to digital broadcast channels, and
these channels transmit date and time information, set
the Clock Mode to Auto. The TV will set the date and
time automatically.
– If the TV will not be tuned to digital broadcast channels,
set the Clock Mode to Manual, and then set the date
and time on the TV manually.
– Select your time zone on the map appears.
TV Controller
The TV’s Controller on the bottom right side of the TV, lets you control the TV without the remote control.
: Turns the TV on or off.
/ : Changes channels.
/ : Adjusts the volume.
: Switch the available video sources.
Control Menu
Remote control sensor/TV Controller
✎ If you press it rst, the control menu appears. You can select the function by pressing and holding the TV’s controller.
✎ The product color and shape may vary depending on the model.
✎ With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel,
adjusting the volume, and switching the input source.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to
decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation,
for example). It is best to unplug the power cord.
♦ UI Scenario
Viewing the Connection Panel
1
4
5
23
HDMI IN
2 (DVI)
HDMI IN
1 (STB)
AUDIO
OUT
ANT IN
6
➣ The product color and shape may vary depending on the model.
1 COMPONENT / AV IN
2 AUDIO OUT
3 HDMI IN 1(STB), 2(DVI)
4 USB (5V 0.5A)
5 ANT IN
6 DC 19V
Auto Program
Auto Program is incomplete.
0 channels are memorized.
Change Settings Scan Again
DTV Air0
Air
Cable
0
0
If you select
Change
If you select
Standalone Only
TV will enter the RF mode.
appears for 3 seconds
If you don’t change the country of the Current Location
If you select Skip
If you select
Standalone Setup
Select your language
Hospitality Option Menu
appears,press Power OFF to exit
Select Picture mode
Select Clock Mode and your Time Zone
Select the channel
band to use for Auto
Program
After Searching
channels.
If you select Factory Reset,the TV resets all values to their factory
defaults and then displays the Hospital Plug & Play menu below when
powered on again.
The TV is automatically
turned off and on.
If you change the country of
the Current Location
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : US
Change Skip
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : ARG_DTV
Change Skip
Easy Set up
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If you select this, Easy
setup will be started.
There are Essential
Details, Channel Scan,
Clock and Terms in Easy
setup.
c
Select your Language
Select your language to start the on screen setup.
The Language Setting will be applied to Main Menu and not Plug and Play.
Press the arrow buttons
to move around the
screen.
Press the Enter button to
select.
English
age
Press th
earrow
buttons
c
Português
Español
Configure your TV
Picture Mode Standard
Choose a picture mode
that best suits your
viewing enviroment.
Select your information in all of the categories
below.
TV Setup Complete!
Your TV is now ready to use.
OK
Auto Program
Antenna Both
Select current connected
antenna.
To get channels, set the options below then select
Scan.
Scan
Auto Program
Auto Program is channels for you...
Air 13
4%
Stop
DTV Air0
Air
Cable
0
0
Clock
-- : -- --
You can adjust your time to set DST, Time Zone and
clock mode
Set current date and time
Clock Mode Auto
Date
-- / -- / ----
Time
-- : -- --
Time Zone South and Southeast
Local Set
Warning! TV might not function if local set is not correctly configured.
When Local set is changed, TV will turn off automatically to apply it.
ARG_DTV
Countries List
None
Standalone mode has been set.
OK
P
w
Factory Reset
Type
Local Set
SW Model
BOM Model
HD450
32S6AH0JJ
ARG_DTV
Tuner
Ch Table
NONE
MRT Option
Engineer Option
S_TC
450
Power On
Menu OSD
Music Mode
External Source
Eco Solution
Cloning
List of Parts
1
2
3
4
5
Remote Control & Batteries
(AAA x 2)
Power Cord
Owner’s Instructions
Safety Guide
Wall mount Adapter
(Depending on the Model)
Adaptor
Installing the LED TV Stand
♦ HG32ND450S
Components
When installing the stand, use the provided components and parts.
A
B
X 4 (M4 X L12)
Stand Screws
1
4
2 3
(M4 X L12) (2EA)
(M4 X L12) (2EA)
✎ Make sure that at least two people lift and move the LED TV.
✎ When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws.
✎ The number of screws may differ depending on the model.
[HD450S-ZB-QSG]BN68-07039M-00ENG.indd 1 2015-03-18  11:20:13
Para registrar este producto visite
www.samsung.com/register.
Guía de conguración rápida
Especicaciones del kit de soporte de pared (VESA)
Adaptador del montaje de pared
(Dependiendo del modelo)
Antes de instalar cualquier otro soporte de pared, instale el adaptador que se suministra por separado con el televisor.
Instale el soporte de pared en una pared sólida, perpendicular al suelo. Si está instalando el soporte de pared a materiales de
construcción que no sean una placa de yeso, comuníquese con su distribuidor más cercano. Si está instalado en el techo o en
una pared inclinada, el televisor puede caer y causar graves lesiones personales.
➣ Las dimensiones estándar de los soportes de pared se muestran en la tabla que sigue.
➣ Los kits de montaje de pared Samsung contienen un manual de instalaciones detallado. Se proveen todas las piezas
necesarias para el montaje.
➣ No use tornillos que no cumplan con las especicaciones de tornillos estándar VESA.
➣ No use tornillos con una longitud superior a la medida estándar o que no cumplan con las especicaciones de tornillos
estándar VESA. Los tornillos que son demasiado largos pueden causar daños en el interior del televisor.
➣ Para soportes de pared que no cumplen con las especicaciones de tornillos estándar VESA, la longitud de los tornillos
puede variar dependiendo de las especicaciones del soporte.
➣ No apriete excesivamente los tornillos. Podría dañar el producto o provocar su caída con riesgo de causar lesiones
personales. Samsung no se hace responsable de este tipo de accidentes.
➣ Samsung no se hace responsable de daños al producto o lesiones personales cuando se usa un soporte de pared que no
cumple con las especicaciones VESA o si el cliente no sigue las instrucciones de instalación del producto.
➣ No instale el televisor con una inclinación de más de 15 grados.
➣ Siempre son necesarias dos personas para instalar el televisor en la pared.
Familia de
producto
Tamaño del
televisor en
pulgadas
Especicaciones de oricios de
tornillos VESA
(A * B) en milímetros
Tornillo estándar
(Longitud* Separación en mm)
Cantidad
TV LED 32 200 X 200 M8 4
No instale el soporte de pared con el televisor encendido. Se podría producir una descarga eléctrica con riesgo
de causar lesiones personales.
ATENCIÓN
No devuelva
esta unidad
Si tiene problemas con el funcionamiento de este televisor.
llame:
ARGENTINA:0800-333-3733
sitio web:
www.samsung.com/ar/support
BN68-07039M-00
Licencia
Fabricado bajo licencia de Dolby Laboratories. Dolby y el símbolo de doble D son marcas
comerciales de Dolby Laboratories.
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535,
6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and
7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201,
5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240,
7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are
registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights
Reserved.
The terms HDMI and HDMI High-De nition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
DivX Certied® to play DivX® video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofcial
DivX Certied® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information
and software tools to convert your les into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered in order to play purchased DivX Video-on-
Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under
license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Aviso de licencias de código abierto
El código abierto que se utiliza en este producto se puede encontrar en la siguiente página web. (http://opensource.samsung.
com) El aviso de licencias de código abierto está redactado solo en inglés.
Especicaciones
Consideraciones ambientales
Temperatura de funcionamiento
Humedad de funcionamiento
Temperatura de almacenamiento
Humedad de almacenamiento
50 °F a 104 °F (10 °C a 40 °C)
10% a 80%, sin condensación
-4 °F a 113 °F (-20 °C a 45 °C)
5% a 95%, sin condensación
Nombre del modelo HG32ND450S
Resolución de pantalla 1366 x 768
Tamaño de pantalla
(Diagonal)
Clase de 32"
(31.5" medidas en diagonal)
Sonido (salida) 5 W x 2
Dimensiones (An x Pr x Al)
Cuerpo principal
Con el soporte
745.4 x 69.0 x 442.2 mm
745.4 x 150.5 x 466.6 mm
Peso
Sin el soporte
Con el soporte
3.73 kg
3.82 kg
➣ El diseño y las especicaciones pueden cambiar sin previo aviso.
➣ Este dispositivo es un aparato digital Clase B.
ADVERTENCIA: Este producto contiene sustancias químicas que, según el Estado de California, provocan cáncer y
toxicidad reproductiva.
Dimensiones
HG32ND450S
1
2
3 4 5 6
8
7
9
(unidad: mm)
1 2 3 4 5 6 7 8 9
HG32ND450S 745.4 699.7 394.3 433.9 442.2 466.6 37.3 69.0 150.5
Plug & Play Hotel
La función Hospital Plug & Play, que realiza automáticamente la selección del modo de hospital, la conguración del país,
del reloj y del modo de imagen, se ejecuta una vez después del primer encendido. La conguración también se ejecuta
automáticamente después de un restablecimiento del servicio.
♦ OSD de conguración local
– Resaltado inicialmente: ARG_DTV
– Si pulsa la tecla Enter después de seleccionar Cambiar,
puede cambiar el país.Si se cambia el país, el televisor
automáticamente se apaga y enciende.
– Si selecciona el país incorrecto, vuelva a restablecer
los parámetros de fábrica después de ingresar al menú
Fábrica.
– Si no desea cambiar el país, seleccione Omitir.
♦ OSD de conguración fácil
– Resaltado inicialmente: Configuración independiente
– Si selecciona el botón Sólo independ, el modo
de hospital Independiente se establece en forma
predeterminada y aparece la OSD “Modo Independiente
configurado” durante 3 segundos.
– El televisor entra en modo RF automáticamente
después de mostrar la OSD “Modo Independiente
configurado” durante 3 segundos.
– Si selecciona el modo Configuración independiente,
aparece la OSD “Seleccione su idioma”.
♦ OSD de selección de idioma
– Resaltado inicialmente: Español
– Tiempo de visualización: El tiempo de espera y la
operación de la OSD son los mismos que los modelos
de televisores para consumidores Samsung.
– Si pulsa la tecla Enter, aparece la OSD “Configure su
TV”.
♦ OSD de conguración de su televisor
– Resaltado inicialmente: Normal.
– El televisor muestra la OSD Modo de Imagen donde
usted puede elegir el modo de imagen Dinámico o
Normal.
♦ OSD del modo de programación automática
– Si pulsa la tecla Enter, el televisor busca canales
automáticamente.
♦ OSD de conguración del Modo Reloj y Zona horaria
– Resaltado inicialmente: Modo Reloj: Automático, Zona
horaria: Sur y Sureste
– Si el televisor será sintonizado con canales de
transmisión digital y estos canales transmiten
información de fecha y hora, configure el Modo Reloj en
Automático. El televisor configurará la fecha y la hora
automáticamente.
– Si el televisor no será sintonizado con canales de
transmisión digital, configure el Modo Reloj en Manual
y luego configure manualmente la fecha y la hora en el
televisor.
– Seleccione su zona horaria en el mapa que aparece.
Controlador del televisor
El controlador del televisor de la parte inferior derecha del televisor le permite controlar el televisor sin utilizar el control remoto.
: Enciende o apaga el televisor.
/ : Cambia los canales.
/ : Ajusta el volumen.
: Alterna entre las fuentes de video disponibles.
Menú de control
Sensor del control remoto/Controlador del televisor
✎ Si lo presiona primero, aparece el menú de control. Puede seleccionar la función al mantener presionado el controlador del
televisor.
✎ El color y la forma del producto pueden variar según el modelo.
✎ Con el controlador del televisor no puede ejecutar otras opciones excepto encender y apagar el televisor, cambiar el canal,
ajustar el volumen y cambiar la fuente de entrada.
Modo de espera
El televisor ingresa en el modo de espera cuando lo apaga, y continúa consumiendo una pequeña cantidad de energía eléctrica.
Por motivos de seguridad y para disminuir el consumo de energía, no deje su televisor en modo suspensión durante períodos
prolongados (cuando se va de vacaciones, por ejemplo). Es mejor desconectar el cable de alimentación.
♦ Escenario de interfaz de usuario
Disposición del panel de conexiones
1
4
5
23
HDMI IN
2 (DVI)
HDMI IN
1 (STB)
AUDIO
OUT
ANT IN
6
➣ El color y la forma del producto pueden variar según el modelo.
1 COMPONENT / AV IN
2 AUDIO OUT
3 HDMI IN 1(STB), 2(DVI)
4 USB (5V 0.5A)
5 ANT IN
6 DC 19V
Auto Program
Auto Program is incomplete.
0 channels are memorized.
Change Settings Scan Again
DTV Air0
Air
Cable
0
0
Si selecciona
Cambiar
Si selecciona Sólo
independ.
El televisor entrará en el
modo RF.
aparece durante 3 segundos
Si no cambia el país de la ubicación actual
Si selecciona Omitir
Si selecciona
Configuración
independiente
Seleccione su idioma
Aparece el menú de opciones de
Hotel, presione Apagar para salir
Seleccione el Modo de imagen
Seleccione el Modo Reloj y su Zona horaria
Seleccione la banda de
canales a utilizar para
programación automática
Después de buscar
los canales.
Si selecciona los valores predeterminados, el televisor restablece los
valores de fábrica predeterminados y muestra el menú Hospital Plug &
Play cuando se vuelve a encender.
El televisor se apaga
y enciende automáticamente.
Si cambia el país de la
ubicación actual
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : US
Change Skip
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : ARG_DTV
Change Skip
Easy Set up
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If you select this, Easy
setup will be started.
There are Essential
Details, Channel Scan,
Clock and Terms in Easy
setup.
c
Select your Language
Select your language to start the on screen setup.
The Language Setting will be applied to Main Menu and not Plug and Play.
Press the arrow buttons
to move around the
screen.
Press the Enter button to
select.
English
age
Press th
earrow
buttons
c
Português
Español
Configure your TV
Picture Mode Standard
Choose a picture mode
that best suits your
viewing enviroment.
Select your information in all of the categories
below.
TV Setup Complete!
Your TV is now ready to use.
OK
Auto Program
Antenna Both
Select current connected
antenna.
To get channels, set the options below then select
Scan.
Scan
Auto Program
Auto Program is channels for you...
Air 13
4%
Stop
DTV Air0
Air
Cable
0
0
Clock
-- : -- --
You can adjust your time to set DST, Time Zone and
clock mode
Set current date and time
Clock Mode Auto
Date
-- / -- / ----
Time
-- : -- --
Time Zone South and Southeast
Local Set
Warning! TV might not function if local set is not correctly configured.
When Local set is changed, TV will turn off automatically to apply it.
ARG_DTV
Countries List
None
Standalone mode has been set.
OK
P
w
Factory Reset
Type
Local Set
SW Model
BOM Model
HD450
32S6AH0JJ
ARG_DTV
Tuner
Ch Table
NONE
MRT Option
Engineer Option
S_TC
450
Power On
Menu OSD
Music Mode
External Source
Eco Solution
Cloning
Lista de piezas
1
2
3
4
5
Control remoto y pilas
(AAA x 2)
Cable de alimentación
Manual del usuario
Guía de seguridad
Adaptador del montaje
de pared
(Dependiendo del modelo)
Adaptador
Instalación del soporte del televisor LED
♦ HG32ND450S
Componentes
Use los componentes y piezas provistas al instalar el soporte.
A
B
X 4 (M4 X L12)
Soporte Tornillos
1
4
2 3
(M4 X L12) (2)
(M4 X L12) (2)
✎ Asegúrese de que al menos dos personas levanten y muevan el televisor LED.
✎ Para conectar el soporte, apoye el producto con la pantalla hacia abajo sobre una supercie blanda y luego ajuste los
tornillos.
✎ El número de tornillos puede variar dependiendo del modelo.
[HD450S-ZB-QSG]BN68-07039M-00ENG.indd 2 2015-03-18  11:20:15
  • Page 1 1
  • Page 2 2

Samsung HG32ND450SG Quick start guide

Samsung
Brand
Samsung
Model
HG32ND450SG
Category
LCD TVs
Type
Quick start guide

Samsung HG32ND450SG 32-inch LED TV offers a captivating viewing experience with its 1366 x 768 resolution display. Enjoy immersive sound with its dual 5W speakers. Easily access a wide range of content with its built-in digital TV tuner and multiple ports, including HDMI, USB, and audio out. Mount it on a wall or place it on a tabletop using the included stand.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers