INSTRUCTIONS
HBLED HSLED HNLED INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy
.
W
e’
d love to hear your comments
. Please call the Mar
keting Depar
tment at 888-RAB-1000 or email:
[email protected]IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING: Make certain power is OFF before installing the xture. No user serviceable parts inside.
CAUTION: For proper weatherproof seal, apply weatherproof silicone sealant around the edge of the Junction Box. This is
especially important with an uneven wall surface. Use silicone sealant or teon tape around the thread of the arm.
HBLED/HSLED/HNLED
Junction Box (not supplied)Cover
Plate (not supplied)Fig 1
Cover Plate
(Fig 3)
Cover Plate Junction Box
Arm Screw
Mighty Post (RAB Cat# MP19)Fig 2
Mighty Post Cap (supplied upon request)
(Fig 3)
Mighty Post (supplied upon request)
Mighty Post Cap Mighty Pos
Arm Screw
Cover Plate
(not supplied)
Junction Box
(not supplied)
Arm Screw
Mighty Post Cap
(supplied upon request)
Mighty Post
(supplied upon request)
Arm Screw