Craftsman 32039590 Owner's manual

Brand: Craftsman

Model: 32039590

Category: Power tools

Type: Owner's manual

Operator's ManuaJ

2.8 Amp RANDOM ORBIT SANDER

Model No. 320.39590

LISTED

_WARNING: To reduce the risk of injury,

the user must read and understand the

Operator's Manual before using this product.

* WARRANTY

* SAFETY

* DESCRiPTiON

* ASSEMBLY

* OPERATION

* MAINTENANCE

* ESPANOL

Sears Brands Management Corporation, Hoffrnan Estates,

IL 60179 U.S.A.

www, craftsman,com

Warranty Page 2

Safety Symbols Pages 4-5

Safety Instructions Pages 6-8

Description Pages 9-10

Assembly Pages 10-11

Operation Pages 11-13

Maintenance Pages 14-15

Troubleshooting Page 15

Parts List Pages 16-17

CRAFTSMAN ONE YEAR LiMiTED WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted

against any defects in material or workmanship. With proof of purchase, a

defective product will be replaced free of charge.

For warranty coverage details to obtain free replacement, visit the web

page: www,craftsman.com/warranty

This warranty does not cover the sandpaper, which is an expendable part that

can wear out from normal use within the warranty period.

This ONE YEAR warranty is void if this product is ever used while providing

commercial services or if rented to another person. For 90 DAY commercial

and rental use terms, see the Craftsman warranty web page.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONS!

This random orbit sander has many features for making its use more pleasant

and enjoyable. Safety, performance, and dependability have been given top

priority in the design of this product, making it easy to maintain and operate.

DANGER: People with electronic devices, such as pacemakers, should

consult their physician(s) before using this product. Operation of electrical

equipment in close proximity to a heart pacemaker could cause interference or

failure of the pacemaker.

2 © Sears Brands, LLC

_,WARNING: Some dust created by power sanding, sawing, grinding, drilling

and other construction activities contains chemicals known to the state of

California to cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead-based paints

Crystalline silica from bricks and cement and other masonry products, and

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemical: work in a well-ventilated

area, and work with approved safety equipment, such as those dust masks that

are specially designed to filter out microscopic particles.

Thepurposeofsafetysymbolsistoattractyouattentiontopossibledangers.

Thesafetysymbolsandtheexplanationswiththemdeserveyourcareful

attentionandunderstanding.Thesymbolwarningsdonot,bythemselves,

eliminateanydanger.Theinstructionsandwarningstheygivearenosubstitutes

forproperaccidentpreventionmeasures.

,_, WARNING: Be sure to read and understand all safety instructions in this

manual, including all safety alert symbols such as "DANGER," "WARNING," and

"CAUTION" before using this tool. Failure to follow all instructions listed in this

manual may result in electric shock, fire, and/or serious personal injury.

SYMBOL SIGNAL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION; may

be used in conjunction with other symbols or pictographs.

DANGER: Indicates a hazardous situation which, if not avoided, will result in

death or serious injury.

,_, WARNING: Indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

_, CAUTION: Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Damage prevention and Information Messages

These inform the user of important information and/or instructions that could

lead to equipment or other property damage if they are not followed. Each

message is preceded by the word "NOTICE", as in the example below.

NOTICE" Equipment and/or property damage may result if these instructions are

not followed.

_WARNING: To ensure safety and reliability, all repairs should be performed

by a qualified service technician.

_, WARNING: The operation of any power tools can result in

foreign objects being thrown into your eyes, which can result

in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shield

and a full face shield when needed. We recommend a Wide

Vision Safety Mask for use over eyeglasses or standard safety

glasses with side shields. Always use eye protection which is

marked to comply with ANSI Z87.1.

SAVE THESE iNSTRUCTiONS

Some of these following symbols may be used on this tool. Please study them

and learn their meaning. Proper interpretation of these symbols will allow you to

operate the tool better and more safely.

SYMBOL NAME DESIGNATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type of current

Direct Current Type or a characteristic of current

n O No-load Speed Rotational speed, at no load

[] Class II Construction Double=insulated construction

.../min Per Minute Revolutions, strokes, surface speed,

orbits, etc., per minute

Wet Conditions Alert Do not expose to rain or use in damp

locations.

To reduce the risk of injury, user must

Read The Operator's Manual read and understand operator's manual

before using this product.

O Always wear safety goggles or safety

Eye Protection glasses with side shields and a fulI face

shield when operating this product.

Alert Precautions that involve

Safety your safety.

No=Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.

No=Hands Failure to keep your hands away from the

Symbol

blade will result in serious personal injury.

No=Hands Failure to keep your hands away from the

Symbol

blade will result in serious personal injury.

No=Hands Symbol Failure to keep your hands away from the

blade will result in serious personal injury.

Hot Surface To reduce the risk of injury or damage,

avoid contact with any hot surface.

GENERAL POWER TOOL SAFETY WARNINGS

,_ WARNING: Read all safety warnings and instructions. Failure to follow the

warnings and instructions may result in electric shock, fire and / or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

= Keep work area clean and well lit. Cluttered or dark areas invite accidents.

= Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

= Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adaptor plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock

• Avoid body contact with earthed or grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable

for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

if operating a power tool in a damp location is unavoidable, use a

ground fault circuit interrupter (GFCl) protected supply. Use of a GFCI

reduces the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use tool while tired or under the

influence of drugs, alcohol, or medication. A moment of inattention while

operating power tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and/or battery pack, picking up or

carrying the tool. Carrying power tools with your finger on the switch or

energizing in power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool

on. A wrench or a key left attached to a rotating part of the power tool may

result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewelry. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewelry or

long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used. Use

of these devices can reduce dust-related hazards.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and more safely at

the rate for which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and must

be repaired.

• Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

• Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tool's operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power tools.

Keepcuttingtoolssharpandclean.Properlymaintainedcuttingtoolswith

sharpcuttingedgesarelesslikelytobindandareeasiertocontrol.

Usethepower tool, accessories and tool bits etc., in accordance with

these instructions, taking into account the working conditions and the

work to be performed. Use of the power tool for operations different from

those intended could result in a hazardous situation.

SERVICE

Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the power

tool is maintained.

Follow instructions in the Maintenance section of this manual. Use of

unauthorized parts or failure to follow Maintenance instructions may create

a risk of shock or injury.

SPECiFiC SAFETY RULES FOR RANDOM ORBIT SANDER

• Hold the sander by insulated gripping surfaces, because the sandpaper

may contact its own cord. Cutting a "live" wire may make exposed metal

parts of the power tool "live" and could give the operator an electric shock.

• A suitable breathing respirator must be worn while sanding lead paint,

some woods and metal to avoid breathing the harmful/toxic dust or air.

• Always wear safety goggles and a dust mask when sanding, especially

sanding over-head.

• The machine is not suitable for wet sanding.

• Secure the workpiece. A workpiece clamped with clamping devices or in a

device is held more secure than by hand.

• Do not leave the tool running. Operate the tool only when hand-held.

KNOW YOUR RANDOM ORBIT SANDER (Fig. 1)

Fig. 1

On/Off Rocker

Switch

Cord

Air Vent

Vacuum

Adaptor

Dust Bag

Sanding Pad

Sandpapers

PRODUCT SPECIFICATIONS

Input 120V, 60Hz, AC only, 2.8 Amps

No-load Speed 12500 OPM

Sanding Pad 5 in. Hook-and-Loop fastening system

Motion Random orbital

Protection Class II

,_ WARNING: The safe use of this product requires an understanding of the

information on the tool and in this operator's manual as well as knowledge of the

project you are attempting. Before using this product, familiarize yourself with all

operating features and safety rules.

RANDOM ORBIT

The random orbit motion provides overlapping sanding movements by

combining orbital and spinning motion.

DUST BAG

Use the dust bag for removing dust from the sanding space to help keep the

work area clean.

VACUUM ADAPTOR

The onboard vacuum adaptor allows you to connect to a 1-1/4 in. or 2-1/4 in.

diameter vacuum hose to help keep the work area clean.

ON/OFF ROCKER SWITCH

The on/off rocker switch is conveniently located for easy control, and is sealed

to keep out dust for long life.

HOOK=AND=LOOP SANDING PAD

The hook-and-loop sanding pad is for easy attachment of hook-and-loop type

sandpapers with pre-punched holes.

PAD BRAKE

The integrated pad brake will quickly stop the spinning pad when the sander is

turned off.

,_ WARNING: If any parts are broken or missing, do not attempt to connect the

sander to a power source or operate the sander until the broken or missing parts

are replaced. Failure to do so could result in possible serious injury.

_, WARNING: Do not attempt to modify this sander or create accessories not

recommended for use with this sander. Any such alteration or modification is misuse

and could result in a hazardous condition leading to possible serious injury.

,_ WARNING: To prevent accidental starting that could cause serious personal injury,

always disconnect the sander from the power source when assembling parts, making

adjustments, installing or removing sandpaper, cleaning, or when it is not in use.

UNPACKING

* Carefully remove the tool and any accessories from the carton. Make sure

that all items listed in the packing list are included.

* Inspect the tool carefully to make sure no breakage or damage occurred

during shipping.

• Do not discard the packing material until you have carefully inspected and

satisfactorily operated the tool.

Ifany parts are damaged or missing, please return the tool to the place of purchase.

PACKING LIST

Randomorbit sander,3 sandpapers(grit60,120,220),dust bag and operator's manual.

WARNING: To prevent accidental starting that could cause serious personal

injury, always disconnect the sander from the power source when assembling

parts, making adjustments, installing or removing sandpaper, cleaning, or when

it is not in use.

TURNING THE SANDER ON/

OFF (Fig. 2)

To turn on the sander, connect

the plug to an electrical outlet,

and then depress the side of the

rocker switch marked "l".

To turn it off, depress the side of

the rocker switch marked "O". The

integrated pad brake will quickly

stop the spinning pad when the

sander is turned off.

ATTACHING THE

SANDPAPER (Fig. 3)

WARNING: Always inspect the

sandpaper before attaching. Do

not use if broken, torn or defective.

1. Disconnect the sander from

the power source.

2. Place the random orbit sander

upside down on a flat surface.

3. Remove any dust or debris

from the sanding pad.

4. Align the holes of the

sandpaper with the holes in the

sanding pad and firmly press

the sandpaper against the

sanding pad to ensure a good

attachment.

Fig. 2

Fig. 3

On/Off rocker switch

Sandpaper

Sanding pad

DUST BAG (Fig. 4}

_,WARNING: Do not use the

dust bag when sanding metal.

Using the dust bag when sanding

metal creates a fire hazard, which

could damage the tool and lead to

serious personal injury.

Your random orbit sander is

supplied with a dust bag to help you

keep the working area clean. The

dust bag is ideal for smaller jobs.

Fig. 4

Lock

Unlock

Indicator Indicator

Adaptor

To install:

1. Disconnect the sander from the power source.

2. Align the indicators of the dust-collecting adaptor and the dust bag.

3. Slide the dust bag forward and push it onto the adaptor and then rotate the

bag clockwise to lock it in place (Fig. 4).

NOTICE- From time to time, clean the vacuum adaptor with a dry brush.

To remove:

1. Disconnect the sander from the power source.

2. Grip the dust bag firmly, rotate it counterclockwise and pull it out from the

tool (Fig. 4).

NOTICE: For longer periods of use, or on large pieces of work, it is advisable to

use a suitable vacuum cleaner. Attach an 1-1/4 in. or 2-1/4 in. wet/dry-vacuum

hose to the vacuum adaptor. It is advisable to wear a suitable dust mask, as

there may be residual airborne dust particles in the area.

,_ WARNING: The dust that is produced while sanding can be detrimental

to health, flammable, or explosive. Suitable safety measures are required.

Examples: Some types of dust known to cause cancer. Always wear a dust

mask, and use the proper dust collection method: dust box for small volume and

vacuum connection for large volume dust collection.

SELECTING THE RIGHT SANDPAPER

Different grits of sandpaper can be purchased from the store where you

purchased the tool. Available grits are: Coarse, Medium and Fine.

Use a coarse grit to sand rough finishes, medium grit to smooth the work and

fine grit for finish sanding.

It is best to make a trial run on a scrap piece of material to determine the best

grit of sandpaper for a particular job.

SANDING

This sander can be used for most sanding operations on materials such as wood,

plastic, metal and painted surfaces. Do not use the sander for wet sanding.

_, WARNING: Do not touch the vents after prolonged use; the gear box could

be very hot.

,_ WARNING: Wear safety goggles, dust mask, and hearing protection.

_1_ CAUTION: Clamp the workpiece to prevent it from moving during operating.

An unsecured workpiece could be thrown towards the operator, causing injury.

1. Plug the sander to the power source.

_, WARNING: Before connecting the sander to power source, always check to

be sure that the switch is in the OFF (O) position. Failure to do so could result in

accidental starting of the sander, causing possible serious injury.

2. Place the sander on the workpiece so that the sandpaper is fully in contact

with the workpiece.

3. Start the sander.

,_ WARNING: Keep your head away from the sander and the sanding area.

Your hair could be drawn into the sander, causing serious injury.

4. For best sanding results, apply light pressure on the sander, but do not

force the tool.

NOTICE: Applying additional pressure only slows the motor, rapidly wears

sandpaper, and greatly reduces sander speed. Excessive pressure will overload

the motor, possibly causing damage from the motor overheating and can result

in inferior work.

Move the sander slowly over the workpiece, making successive passes in parallel

lines, circles, or crosswise movements. The removal rate and the sanding pattern

are determined by the choice of sandpaper and the work surface.

Do not allow sanding on one spot too long as the sander's rapid action may

remove too much material and make the surface uneven.

Upon completion of sanding operation, remove the sander from the

workpiece, turn the sander off and wait until it comes to a complete stop

before putting it down.

Extended periods of sanding may tend to overheat the motor. If this occurs,

remove the sander from the workpiece and turn it off. Wait until the sander

comes to a complete stop before putting the sander down. Remove the

sandpaper and, without obstructing the vent area with your hand, turn the

sander on and run it free without a load to cool the motor.

,d_ WARNING: Before cleaning or performing any maintenance, make sure that

the random orbit sander has been disconnected from the power source.

,_ WARNING: Always wear safety goggles or safety glasses with side shields

when using compressed air to clean the tool. If the operation is dusty, also wear

a dust mask.

CLEANING THE DUST BAG

For most efficient operation, empty the dust bag when it is no more than half

full. This will permit the air to flow through the dust bag better. Always empty

and clean the dust bag thoroughly when you've finished sanding and before you

store the sander.

To empty the dust bag

1. Disconnect the sander from

the power source.

2. Remove the dust bag from

the sander and shake out the

dust.

3. For a more thorough cleaning

of the dust bag, remove the

dust bag from the frame and

shake out the dust (Fig. 5).

4. Use a soft brush to clean

the frame.

Fig. 5

Slot Frame Steel traveler

Dust bag

5. Replace the dust bag over the frame, then reinstall it on the sander.

NOTICE: When replacing the dust bag over the frame, make sure that the steel

ring of the dust bag snaps into the slot of the frame.

,_ WARNING: Collected sanding dust from sanding surface coatings such

as polyurethanes, linseed oil, etc., can self-ignite in the sander dust bag or

elsewhere and cause fire. To reduce the risk of fire, always empty the dust

bag frequently while sanding and never store or leave a sander without totally

emptying its dust bag. Also follow the recommendations of the coating

manufacturers.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible

to damage from various types of commercial solvents and may be damaged

by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. Keep all

ventilation openings clean.

_1_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based

products, penetrating oils, etc. come in contact with plastic parts. Chemicals can

damage, weaken or destroy plastic which may result in serious personal injury.

_, WARNING: When servicing, use only identical replacement parts. Use of any

other parts may create a hazard or cause product damage. To ensure safety and

reliability, all repairs should be performed by a qualified service technician.

PROBLEM CAUSE

The sander does not Not connected to power

work source

Unsatisfactory sanding

result

Sandpaper is worn

Sandpaper is not

suitable for the

workpiece

SOLUTION

Plug the sander into a

power source

Replace with new

sandpaper

Use correct sandpaper

2.8 Amp RANDOM ORBIT SANDER MODEL NUMBER 320.39590

The Model Number will be found on the nameplate of the tool. Always mention

the Model Number when ordering parts for this tool.

To order parts, call 1-881-331-4569.

2.8 Amp RANDOM ORBIT SANDER MODEL NUMBER 320.39590

The Model Number will be found on the nameplate of the tool. Always mention

the Model Number when ordering parts for this tool.

To order parts, call 1-881-331-4569.

2740351000 Stator

201 2823864000 Motor Assembly

2 5700010000 Ball Bearing 1

3 5650050000 Plain Washer 1

4 3124643000 Insulated Pad 1

5 2751011000 Rotor 1

6 5650043000 Plain Washer 2

7 5700010000 Ball Bearing 1

8 3420858000 Dust Fan 1

9 3127394000 Fan Baffle 1

10 5690214000 Brake Ring 1

202 2822932000 Bearing Support Assembly

11 3420066000 Bearing Support 1

12 5650041000 Plain Washer 1

13 5700018000 Ball Bearing 1

14 3700090000 Washer 1

15 5620069000 Screw 1

16 3121122000 Bearing Cover 1

17 3400153000 Base Pad 1

18 5620419000 Screw With Washer 4

19 3127397000 Vacuum Adapter 1

20 4810002000 Power Cord & Plug 1

21 3121124000 Cord Guard 1

22 3120234000 Cord Anchorage 1

23 5610024000 Tapping Screw 2

24 4930004000 Connecter 3

25 4891104000 PCB Assembly 1

5690013000 O Ring

27 3321735000 Left Housing 1

28 4960015000 Carbon Brush 2

29 2800015000 Brush Holder 2

30 3700491000 Flash Board 2

31 3700577000 Fixing Board 1

32 4870051000 Switch 1

33 3127321000 Switch Cover 1

34 4930038000 Receptacle 4

35 4930008000 Sleeve 4

36 3321734000 Right Housing 1

37 5610248000 Tapping Screw 5

38 5660187000 C Ring 1

39 5690268000 O Ring 1

300 2823158000 Dust Bag Assembly 1

301 3650119000 C Ring 1

302 3800100000 Dust Bag 1

303 3127320000 Dust Bag Skeleton 1

304 3810300000 Sanding Paper 1

Manual del Propietario

LIJADORA ORBITAL ALEATORIA

de 2.8 Amp

Modelo N° 39590

LISTED • GARANTJA

• SEGURIDAD

_ADVERTENCIA: Para reducirel riesgo de • DESCRIPCI6N

lesiones,el usuario debe leery comprender • MONTAJE

el Manual del Propietario antes de usar • OPERACION

este producto, • ESPANOL

Sears Brands Management Corporation, Hoffman Estates,

IL 60179 U.S.A.

www, craftsman,com

Garantia P&gina 20

Simbolos de Seguridad Paginas 22-23

Instrucciones de Seguridad Paginas 24-27

Descripcion Paginas 28-29

Montaje Pagina 30

Operacion Paginas 31-34

Mantenimiento Paginas 34-35

ldentificaci6n y Soluci6n de Problemas Pagina 36

GARANTiA LIMiTADA DE UN A_lO CRAFTSMAN

DURANTE UN ANO desde la fecha de compra, este producto cuenta con

garantia contra cualquier clase de defectos de material o de mano de obra.

Mediante una prueba de compra, el producto defectuoso se reemplazara

sin costo alguno.

Si desea obtener detalles sobre la cobertura de garantia para obtener un

reemplazo sin costo, visite la p&gina web: www.craftsman.com/warranty

Esta garantia no cubre la papel de lija, porque es una pieza prescindible que

pueden desgastarse debido al uso normal dentro del periodo de garantia.

La presente garantia de UN ANO quedar& anulada si este producto se usa

para brindar servicios comerciales o si se alquila a terceros. Para consultar

los terminos de uso comercial y de alquiler de 90 DiAS, visite la pagina web

sobre garantia de Craftsman.

Esta garantia le otorga derechos legales especificos y usted puede contar

con otros derechos, que pueden variar de estado a estado.

Sears Brands Management Corporation, Hoffman Estates, IL 60179.

iGUARDE ESTAS INSTRUCCIONES!

iLEA TODAS LAS INSTRUCCIONES!

Esta lijadora orbital aleatoria cuenta con varias caracteristicas para hacer su

uso mas agradable y placentero. Durante el diseSo de esta herramienta, la

seguridad, el rendimiento y la confiabilidad han sido las prioridades principales,

ademas de la sencillez de mantenimiento y de operacion.

Page is loading ...

Craftsman 32039590 Owner's manual

Brand: Craftsman

Model: 32039590

Category: Power tools

Type: Owner's manual

Download PDF

report

in other languages

español: Craftsman 32039590 El manual del propietario

Craftsman 32039590 Owner's manual

Craftsman 32039590 Owner's manual

in other languages

Related papers

Other documents