Sharkoon 2-Bay RAID Box Specification

Sharkoon
Brand
Sharkoon
Model
2-Bay RAID Box
Category
HDD/SSD enclosures
Type
Specification
2-BAY RAID BOX
2-BAY RAID BOX
Manual
2-BAY RAID BOX
English
1. Features
• ExternalRAIDcasewithtwomountingbaysfor
3.5"SATAHDDs
• RAIDmodes:Standard,0,1andCombined(JBOD)
• EasyRAIDmodeselection
• Noadditionalsoftwarerequired
• FastSwapmechanismforeasyHDDhandling
• Premiumqualitycraftsmanship
• On/offbutton
• LEDindicationsforpower,HDDactivityandRAIDmode
• Pre-installed70mmfan
• Supportedoperatingsystems:WinXP/Vista/7
(32-bitand64-bit)
2. Specifications
• Externalinterface:USB3.0
(downwardcompatiblewithUSB2.0andUSB1.x)
• Internalinterfaces:SATA(SATAIandII)
• EuPstandby:0.4W
• Dimensions:215x130x120mm(LxWxH)
• Weight(empty):1926g
2-BAY RAID BOX
3. The device at a glance
1 – Doorlock
2 – LEDforHDDactivity
3 – PowerLED
4 – On/offbutton
5 – RebuildLED
6 – RAIDmodeLED
7 – RAIDmodeswitch
8 – HDDmountingbays
9 – Modebutton
10– ModeLED
11– USB3.0connector
12– Powerconnector
2-BAY RAID BOX
4. Getting started
4.1 HDD installation
1. Openthedoorlock(A).
2. Openthefrontlid(B).
3. Slidea3.5“SATAHDD(labelfacingupwards)
intotherespectivemountingbay(C).
4. Closeandlockthemountingbay(D).
D
C
B
A
2-BAY RAID BOX
4.2 Connecting to a PC
5. Set RAID mode
1. ToggletheRAIDswitchtothedesiredRAIDmode.
2. Switchonthedevice.
3. Press“Mode”.ThedesiredRAIDmodeisset.
AssoonastheLEDforHDDactivityashesblue
thedevicemaybeaccessed.
6. Remove defective RAID HDD
IncaseaHDDinsideaRAIDarraygetsdefective,
theLEDforHDDactivitywillpermanentlyashred.
InaRAID1thedatacanberestoredbyrebuildingthe
array(see7.).
DatafromanexistingRAID0,StandardorCombined
modearelost.ChangethedefectiveHDD.
2-BAY RAID BOX
7. Rebuild
Note:
The new HDD must provide at least the same
capacity as the replaced one.
Do not change the RAID mode prior to the rebuilding.
Do not change the HDD order before commencing
the rebuild process.
1. Switchoffthedevice.
2. ChangethedefectiveHDD.
3. Poweronthedevice,therebuildprocedure
willstartautomaticallyevenwhenthedevice
isdisconnectedfromyourPC.
8. Important notes
After5minutesofinactivitythedevicewillswitchto
sleepmode.DuringsleepmodeallHDDsandthe
built-infanswillbeswitchedoff.
Sleepmodeendsassoonasthedeviceisaccessed.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Sharkoon 2-Bay RAID Box Specification

Sharkoon
Brand
Sharkoon
Model
2-Bay RAID Box
Category
HDD/SSD enclosures
Type
Specification
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents