Uniden TRU 3455 User manual

OWNER’S MANUAL

TRU3455

TRU3455 coverpage 6/28/01 2:17 PM Page 2

The TRU3455 features include

AAuuttooTTaallkk

TT

MM

and

AAuuttooSSttaannddbbyy

TT

MM

. AutoTalk allows you to answer a call by just

removing the handset from the base so you don´t have to waste time pushing buttons or flipping switches.

AutoStandby allows you to hang up by simply returning the handset to the base.

To protect you against misbilled calls which might result from your phone being activated by other

equipment, the TRU3455 has

RRaannddoomm CCooddee

TT

MM

digital security which automatically selects one of over 65,000

digital security codes for the handset and base. Also, the

AAuuttooSSeeccuurree

TT

MM

feature electronically locks your

phone when the handset is in the base.

BBee ssuurree ttoo vviissiitt oouurr wweebb ssiittee:: wwwwww..uunniiddeenn..ccoomm

Uniden

®

is a registered trademark of Uniden America Corporation.

AutoTalk, AutoStandby, Random Code, and AutoSecure are trademarks of Uniden America Corporation.

Welcome

Features

Congratulations on your purchase of the Uniden TRU3455 cordless telephone.

This phone is designed and engineered to exacting standards for reliability, long life

and outstanding performance.

NNoottee:: SSoommee iilllluussttrraattiioonnss iinn tthhiiss mmaannuuaall mmaayy ddiiffffeerr ffrroomm tthhee aaccttuuaall uunniitt ffoorr

eexxppllaannaattiioonn ppuurrppoosseess..

• 2.4 GHz Digital Spread Spectrum

• Integrated Answering Device

• 35 Channel Autoscan

• 20-Number Memory Dialing (10 on

the handset and 10 on the base)

• Tone/Pulse Dialing

• Handset Volume Control

• 32 Digit Redial

• Dual keypad Operation

• Page/Intercom

• AutoTalk

TM

• AutoStandby

TM

• 6 Hour Talk Time

• 10 Day Standby Time

• Hearing Aid Compatible

TRU3455 ENG 6/28/01 11:28 AM Page ii

Contents

Storing Mixed Tone/Pulse Numbers 19

Dialing a Stored Number 20

Chain Dialing 20

Erasing a Stored Number 21

Mute 21

Replacing a Stored Number 21

The Integrated Answering Device

Features 22

Setting Up Your Answering System 23

Using Your Answering System 26

Additional Information

Changing the Digital Security Code 31

Installing the Beltclip 32

Headset Installation 32

Note on Power Sources 33

Maintenance 33

Troubleshooting 34

General Information 36

Precautions 37

Warranty 38

Index 39

Welcome/Features

Controls and Functions

2, 3

Getting Started

Read this first 4

Checking the Package Contents 5

Setting up the Phone 6

Basics

Making and Receiving Calls 11

Terminology 12

Adjusting Ringer/Volume Controls 12

Tone Dialing Switch-over 13

Traveling Out-of-Range 13

Selecting a Different Channel 14

Using the Flash Button 14

3-way Conferencing 15

Intercom Feature 16

Call Transfer Feature 17

Memory Dialing

Storing a Number in Memory 18

Entering a Pause in Memory Dialing 19

TRU3455 ENG 6/28/01 11:28 AM Page iii

CONTROLS AND FUNCTIONS[ 2 ]

Controls and Functions

1. Handset Antenna

2. Headset Jack Cover

3. Handset Battery Compartment

4. Handset Earpiece

5. Talk/Batt (Talk/Battery) LED

6. Vol (Volume)/Cursor up ▲ Key

7. Memory Key

8. Talk Key

9. Vol (Volume)/Cursor down ▼ Key

10.

*

/tone Key

11. Redial Key

12. Pause Key

13. Handset Microphone

14. Mute Key

15. Flash Key

16. Channel Key

17. Intercom Key

18. Handset Charging Contacts

TRU3455 ENG 6/28/01 11:28 AM Page 2

CONTROLS AND FUNCTIONS [ 3]

19. Base Charging Contacts

20. Status LED

21. Speaker LED

22. PIN Key

23. Reverse Key

24. Base Speaker

25.

*

/Tone Key

26. Voice Memo Key

27. Greeting Key

28. Base Speaker Volume Adjust

29. Delete Key

30. Play Key

31. Forward Key

32. Clock Key

33. Ans on/off (Answer on/off) Key

34. Memory Key

35. Redial/P (Redial/Pause) Key

36. Page/int´com

(Page/Intercom) Key

37. Base Antenna

38. Mute Key

39. Speaker Key

40. Flash Key

41. Record Time Switch

42. Ring Time Switch

43. Base Microphone

44. Base Ringer Switch

45. Pulse-Tone Switch

46. DC Power Input

47. Phone Jack

TRU3455 ENG 6/28/01 11:28 AM Page 3

GETTING STARTED[ 4 ]

Read This First

This cordless telephone must be set up before use. Follow these steps:

AAbboouutt tthhee ddiiggiittaall sseeccuurriittyy ccooddee

This cordless telephone uses a

digital security code to prevent

unauthorized access to your

base unit. This security code

prevents other cordless

handsets from making calls

through your base unit.

A random security code will be

assigned automatically between

your base unit and handset

when you charge the battery

pack for the first time.

If you want to reset the security

code, see page 31.

SStteepp 11

((ppaaggee 55))

Unpack the telephone and accessories.

SStteepp 22

((ppaaggee 66))

Next, choose the best location

to set up the base unit.

SStteepp 33

((ppaaggee 77 ttoo 1100))

Then, insert the battery pack into

the handset. Connect the base unit.

You must charge the battery pack for

1155--2200 hhoouurrss bbeeffoorree pplluuggggiinngg iinnttoo tthhee

tteelleepphhoonnee lliinnee aanndd uussiinngg tthhee pphhoonnee..

TRU3455 ENG 6/28/01 11:28 AM Page 4

GETTING STARTED [ 5]

GETTING STARTED

Checking the Package Contents

Make sure you have received the following items in the package. If any of these items are missing or

damaged, contact the Uniden Parts Department (see below).

Uniden Parts Department at (800) 554-3988

Hours: M-F 7:00 a.m. to 5:00 p.m. CST.

We can also be reached on the web at www.uniden.com

•• HHaannddsseett

•• AACC aaddaapptteerr

((AADD--331133))

•• RReecchhaarrggeeaabbllee bbaatttteerryy

((BBTT--880000))

•• TTeelleepphhoonnee ccoorrdd

•• BBeellttcclliipp

•• BBaassee uunniitt

AAllssoo iinncclluuddeedd::

•• TThhiiss OOwwnneerr´´ss MMaannuuaall

•• QQuuiicckk RReeffeerreennccee GGuuiiddee

TRU3455 ENG 6/28/01 11:28 AM Page 5

GETTING STARTED[ 6 ]

Setting up the Phone

DDoo tthhee ffoolllloowwiinngg sstteeppss::

A. Choose the best location C. Connect the base unit

B. Install the battery pack D. Choose the dialing mode

AA.. CChhoooossee tthhee bbeesstt llooccaattiioonn

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS

included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are

some important guidelines you should consider:

• The location should be close to both a phone jack and a continuous power outlet

which is not switchable.

• Keep the base and handset away from sources of electrical noise such as motors,

microwave ovens, and fluorescent lighting.

• Be sure there is sufficient space to raise the base antenna to a vertical position.

• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.

• If your second phone line has a separate modular jack, place your phone so you can

access both jacks.

AAvvooiidd eexxcceessssiivvee mmooiissttuurree,,

eexxttrreemmeellyy llooww tteemmppeerraattuurreess,,

dduusstt,, mmeecchhaanniiccaall vviibbrraattiioonn,, oorr sshhoocckk

AAvvooiidd hheeaatt ssoouurrcceess,, ssuucchh aass rraaddiiaattoorrss,,

aaiirr dduuccttss,, aanndd ssuunnlliigghhtt

AAvvooiidd tteelleevviissiioonn sseettss aanndd ootthheerr

eelleeccttrroonniicc eeqquuiippmmeenntt

AAvvooiidd nnooiissee ssoouurrcceess ssuucchh aass aa wwiinnddooww bbyy

aa ssttrreeeett wwiitthh hheeaavvyy ttrraaffffiicc

AAvvooiidd mmiiccrroowwaavvee oovveennss

AAvvooiidd ppeerrssoonnaall ccoommppuutteerrss

AAvvooiidd ootthheerr ccoorrddlleessss tteelleepphhoonneess

CChhoooossee aa cceennttrraall llooccaattiioonn

TRU3455 ENG 6/28/01 11:28 AM Page 6

[ 7 ]GETTING STARTED [ 7]

BB.. IInnssttaallll tthhee bbaatttteerryy ppaacckk

CChhaarrggee tthhee bbaatttteerryy ppaacckk ffoorr aatt lleeaasstt 1155--2200 hhoouurrss bbeeffoorree pplluuggggiinngg tthhee pphhoonnee lliinnee

iinnttoo yyoouurr pphhoonnee..

1) Press in on the battery cover release and slide the cover

down until it comes off.

2) Connect the battery pack connector observing correct

polarity (black and red wires) to the jack inside the

battery compartment.

Do not exert any force on this connection. It could

cause damage to the battery or handset. The plastic

connector will fit together only one way. Once you are

certain that you have made a good connection, then

insert the battery pack into the battery compartment.

Do not pinch the wires.

3) Securely close the battery compartment cover by sliding it

up until it snaps into place.

4) Place the handset in the base unit.

GETTING STARTED

note

Use only the Uniden

Battery (BT-800)

supplied with your

phone. Replacement

batteries are also

available through the

Uniden Parts

Department (See

page 5).

TRU3455 ENG 6/28/01 11:28 AM Page 7

[ 8 ]

note

GETTING STARTED[ 8 ]

BBaatttteerryy uussee ttiimmee ((ppeerr cchhaarrggee))

From fully charged

• Six hours continuous use.

• Ten days when the handset is in the standby mode.

LLooww bbaatttteerryy aalleerrtt

When the battery pack in the handset is low and

needs to be charged, the

ttaallkk//bbaatttt

indicator

flashes.

If this occurs while you are on the phone, you will

hear an alert tone. Complete your call as quickly

as possible and return the handset to the base for

charging.

CClleeaanniinngg tthhee cchhaarrggiinngg ccoonnttaaccttss

TToo mmaaiinnttaaiinn aa ggoooodd cchhaarrggee,, iitt iiss iimmppoorrttaanntt ttoo

cclleeaann tthhee bbaatttteerryy ccoonnttaaccttss oonn tthhee hhaannddsseett aanndd

bbaassee uunniitt wwiitthh aa ddrryy ccllootthh oorr aa ppeenncciill eerraasseerr

aabboouutt oonnccee aa mmoonntthh..

DDoo nnoott uussee aannyy lliiqquuiiddss oorr ssoollvveennttss..

• Even when the battery

pack is not being used,

it will gradually

discharge over a long

period of time. For

optimum performance,

be sure to return the

handset to the base

unit after each

telephone call.

• If you must replace the

battery pack during a

telephone call,

complete the

replacement of the

battery pack within

30 seconds, and you

can return to the

original call.

contacts

TRU3455 ENG 6/28/01 11:28 AM Page 8

[ 9 ]

Place the power cord

so that it does not

create a trip hazard or

where it could become

chafed and create a

fire or electrical

hazard.

!

GETTING STARTED [ 9]

GETTING STARTED

CC.. CCoonnnneecctt tthhee bbaassee uunniitt

1) Connect the AC adapter to the

DDCC IINN 99VV

jack and a standard 120V AC wall outlet.

2) Set the base on a desk or tabletop. Place

the handset on the base unit as shown.

3) Raise the antenna to a vertical position.

After installing the battery pack in the

handset,

cchhaarrggee tthhee hhaannddsseett aatt lleeaasstt 1155--

2200 hhoouurrss bbeeffoorree pplluuggggiinngg iinnttoo tthhee pphhoonnee

lliinnee..

Once the handset battery pack is

fully charged, connect the telephone

line cord to the base and the telephone

wall outlet.

4) Connect the telephone line cord to the

TTEELL LLIINNEE

jack and to a telephone

outlet.

• Use only the supplied AD-313 AC adapter. Do not use any other AC adapter.

• Connect the AC adapter to a continuous power supply.

• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

• If your telephone outlet isn´t modular, contact your telephone company

for assistance.

MMoodduullaarr

TRU3455 ENG 6/28/01 11:28 AM Page 9

[ 10 ]

DD.. CChhoooossee tthhee ddiiaalliinngg mmooddee

Depending on your dialing system, set the PULSE-TONE switch as follows:

If you aren´t sure of your dialing system, make a

trial call with the PULSE-TONE switch set to

TTOONNEE

.

If the call connects, leave the switch as is;

otherwise, set to

PPUULLSSEE

.

GETTING STARTED

IIff yyoouurr ddiiaalliinngg ssyysstteemm iiss SSeett tthhee sswwiittcchh ttoo

Tone

TTOONNEE

Pulse

PPUULLSSEE

TRU3455 ENG 6/28/01 11:28 AM Page 10

HHaannddsseett oonn tthhee BBaassee HHaannddsseett ooffff tthhee BBaassee FFrroomm tthhee BBaassee

[ 11 ]BASICS [ 11]

Making and Receiving Calls

BASICS

The base microphone is

located under the

phone. Position yourself

as near to the base as

possible and speak

clearly.

When the phone rings,

remove the handset from

the base. (AutoTalk)

1. Remove the handset from

the base and press

ttaallkk

.

2. The

ttaallkk//bbaatttt

LED lights.

3. Listen for the dial tone.

4. Dial the number.

Return the handset to the

base, (AutoStandby) or

press

ttaallkk

.

1. Remove the handset from

the base and press

ttaallkk

.

2. Listen for the dial tone.

3. Press

rreeddiiaall

to dial the

last number dialed.

Press any key.

1. Pick up the handset and

press

ttaallkk

.

2. The

ttaallkk//bbaatttt

LED lights.

3. Listen for the dial tone.

4. Dial the number.

Press

ttaallkk

.

1. Pick up the handset and

press

ttaallkk

.

2. Listen for the dial tone.

3. Press

rreeddiiaall

to dial the

last number dialed.

Press

ssppeeaakkeerr

.

1. Press

ssppeeaakkeerr

.

2. Dial the number.

Press

ssppeeaakkeerr

..

1. Press

ssppeeaakkeerr

.

2. Press

rreeddiiaall

.

AAnnsswweerr aa ccaallll

MMaakkee aa ccaallll

HHaanngg uupp

RReeddiiaall

TRU3455 ENG 6/28/01 11:28 AM Page 11

[ 12 ][ 12] BASICS

Adjusting Ringer/Volume Controls

RRiinnggeerr ttoonnee aanndd vvoolluummee

1. While the phone is not in use, press

vvooll

▲ or ▼ .

2. The phone has two ringer tones, each with two volume levels.

Press

vvooll

▲ or ▼ again until you hear the ringer tone and volume

level you want.

SSeettttiinngg tthhee hhaannddsseett eeaarrppiieeccee vvoolluummee

1. While you are on a call, press

vvooll

▲ or ▼ .

2. The phone has four receiver volume levels; Low, Medium, High, and Maximum.

Press

vvooll

▲ or ▼ again until you hear the volume

level you want. When you hang up, the phone keeps

the last volume setting selected.

BBaassee rriinnggeerr sswwiittcchh

This switch turns the base ringer on or off.

BBaassee ssppeeaakkeerr vvoolluummee

To control the speaker volume of the base, adjust the

volume by pressing

vvoolluummee

▲ or ▼ as desired.

Terminology

Throughout this manual, terms such as Standby and Talk Mode are used. Below is

the terminology explanation.

•

SSttaannddbbyy MMooddee

- The handset is not in use, off the base and

ttaallkk

has not been

pressed. A dial tone is not present.

•

TTaallkk MMooddee

- The handset is off the base and

ttaallkk

has been pressed enabling a

dial tone.

TRU3455 ENG 6/28/01 11:28 AM Page 12

BASICS

[ 13 ]

BASICS

Tone Dialing Switch-over

Some telephone companies use equipment that require pulse dialing (sometimes

referred to as rotary dialing). If you need to enter tone dialing digits, you can

switch-over to tone dialing during the call. An example of this could be entering your

bank account number after you have called your bank. The digits of your bank account

can be entered using DTMF tones.

Initially make your call with the pulse dialing mode. Once

your call connects, press

*

// ttoonnee

on the handset, or

*

//

ttoonnee

on the base. Enter the desired number (like in example

above the bank account number). These digits will be sent

as tone dialing. This special number can be stored in a

memory location. This is referred to as Chain Dialing (See

page 20). Once the call ends, the tone mode is canceled

and pulse dialing mode resumes.

The tone feature only

applies when the dial

mode is set to pulse.

note

Traveling Out-of-Range

During a call, as you begin to move your handset too far from your base unit,

noise increases. If you pass the range limits of the base unit, your call will

terminate within 30 seconds.

TRU3455 ENG 6/28/01 11:28 AM Page 13

[ 14 ]

BASICS

Using the Flash Button

Use the

ffllaasshh

button for accessing services such as Call Waiting. (You must subscribe

to Call Waiting service from your phone company to use this feature.)

If you receive a call during your conversation, press the

ffllaasshh

button on the

handset or base. Press the

ffllaasshh

button again to return to the previous call.

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change

the phone´s channel for clear operation. Interference can come from appliances

or other phones in your home. This function works only when the phone is in use.

The

cchhaannnneell

button on the handset allows you to choose

between 35 factory set channels. During the course of a

conversation, if you hear static or noise which makes it

difficult to hear, press

cchhaannnneell

. The

ttaallkk//bbaatttt

LED flashes,

indicating the phone is changing to another channel.

TRU3455 ENG 6/28/01 11:28 AM Page 14

BASICS

[ 15 ]

BASICS

3-way Conferencing

The Uniden TRU3455 permits 3-way conversations

between the handset, base and outside line.

WWhheenn ssppeeaakkiinngg oonn tthhee hhaannddsseett

1. Press

ssppeeaakkeerr

on the base to join the

3-way conversation.

2. To hang up, press

ssppeeaakkeerr

on the base.

The handset will still be connected to the call.

WWhheenn ssppeeaakkiinngg oonn tthhee bbaassee

1. Press

ttaallkk

on the handset to join the 3-way

conversation.

2. To hang up, return the handset to the base, or press

ttaallkk

on the handset. The base will still be connected

to the call.

• Pressing the

ssppeeaakkeerr

key on the base while

dialing with the

handset will set the

3-way conversation

mode, and dialing is

not affected.

• During a 3-way

conversation, you can

only dial from the

handset.

• Pressing the

ttaallkk

on

the handset while

dialing with the base

will not set the 3-way

conversation mode.

TRU3455 ENG 6/28/01 11:28 AM Page 15

BASICS

[ 16 ]

Intercom Feature

IInntteerrccoomm ffrroomm tthhee bbaassee ttoo hhaannddsseett

1. Press

ppaaggee//iinntt´´ccoomm

on the base. The handset and the base beep. (If no

answer, press

ppaaggee//iinntt´´ccoomm

again to disconnect.)

2. Press

iinntteerrccoomm

or

ttaallkk

on the handset to answer.

3. To turn off the intercom, press

ttaallkk

on the handset or

ssppeeaakkeerr

on the base.

IInntteerrccoomm ffrroomm tthhee hhaannddsseett ttoo bbaassee

1. Press

iinntteerrccoomm

on the handset. (If no answer, press

iinntteerrccoomm

again to

disconnect.)

2. At the base, press

ppaaggee//iinntt´´ccoomm

or

ssppeeaakkeerr

to answer. Speak into the base

microphone.

3. To turn off the intercom, press

ttaallkk

on the handset or

ssppeeaakkeerr

on the base.

If the page is not

answered within one

minute, the paging

sounds stops

automatically.

TRU3455 ENG 6/28/01 11:28 AM Page 16

BASICS

[ 17 ]

BASICS

Call Transfer Feature

TToo TTrraannssffeerr ffrroomm tthhee HHaannddsseett ttoo tthhee BBaassee

1. Press

iinntteerrccoomm

on the handset. The caller is put on hold and the intercom tone

sounds on the handset and base.

2. Press

ppaaggee//iinntt´´ccoomm

or

ssppeeaakkeerr

on the base. The intercom mode is activated,

but the caller is still on hold.

3. To transfer the call to the base, press

ttaallkk

on the handset. To cancel the

transfer, press

ssppeeaakkeerr

on the base.

TToo TTrraannssffeerr ffrroomm tthhee BBaassee ttoo tthhee HHaannddsseett

1. Press

ppaaggee//iinntt´´ccoomm

on the base. The caller is put on hold and the intercom

tone sounds on the handset and base.

2. Press

iinntteerrccoomm

or

ttaallkk

on the handset. The intercom mode is activated, but the

caller is still on hold.

3. To transfer the call to the handset, press

ssppeeaakkeerr

on the base. To cancel the

transfer, press

ttaallkk

on the handset.

TRU3455 ENG 6/28/01 11:28 AM Page 17

[ 18 ]

Storing a Number in Memory

WWiitthh tthhee HHaannddsseett

Your TRU3455 phone stores up to 10 numbers in the handset plus 10 numbers in

the base.

1. Remove the handset from the base and press

mmeemmoorryy

.

The

ttaallkk//bbaatttt

LED blinks.

2. Enter the phone number you want to store (up to 20 digits).

3. Press

mmeemmoorryy

and enter a number (0-9) on the keypad for the memory location

you want to use. You hear a long beep and the

ttaallkk//bbaatttt

LED goes out

indicating the number has been stored successfully.

If you select any keys other than 0-9, the handset will beep rapidly and no

number will be stored.

WWiitthh tthhee BBaassee

1. Press

mmeemmoorryy

. The

ssttaattuuss

LED blinks.

2. Dial the number you wish to store (up to 20 digits).

3. Press

mmeemmoorryy

. Enter the memory location number (0-9)

on the keypad. The

ssttaattuuss

LED goes out.

A confirmation tone sounds and the number is stored.

• The 10 memory

locations in the base

are independent

locations from the

handset.

• The 10 memory

locations are

represented by the

numbers 0-9 on the

keypad. If you store a

number in one of

locations, then attempt

to store a different

number in the same

location later, the new

number will overwrite

the previous one.

MEMORY DIALING

• You have 20 seconds

after pressing

mmeemmoorryy

to enter the number

you wish to store.

Otherwise, an error

tone will sound.

TRU3455 ENG 6/28/01 11:28 AM Page 18

Page is loading ...

Uniden TRU 3455 User manual

This manual is also suitable for

Uniden TRU 3455 User manual

Related papers

Other documents