Woodguard Post Flat Cap Installation
Congratulations on purchasing the finest exterior pre-finished lumber on the market today. Woodguard
will last many years to come with very low maintenance and structural durability engineered to be
trouble free.
To install your cap, after you have cut your Post to the proper length, simply push the cap onto the end
of the Post and apply hand pressure. Your cap can be removed and reapplied several times if necessary
as it comes with a pressure sensitive adhesive sealant.
-
1
Woodguard 48-98-88450 Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
