Page is loading ...
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper posion, ght and free from damage. Keep this assembly instrucon for future reference. Adult assembly is required. The product of Hillsdale Furniture,
LLC is designed for residenal use only. Customer Service Phone Number: 502-562-0000
Date: 10-28-2016
Page 1 of 2
Corbin Cocktail Table - Top Shelf Glass W/Round Bottom Ring
Model #4327-881
QTYCODE HARDWARE
8
4
4
4
4
1
1
2
3
4
5
6
1/4” x 15mm Sunk Bolts
1/4” x 15mm Allen Bolts
Ф6.5 Spring Washers
Ф6.5 x δ1.5 Flat Washers
Glass Pads
Allen Wrench
CARE & MAINTENANCE
:
The touch of a so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
HDFBP
• Do not let any sharp objects touch or rub the surface of the product.
• When assembling, do not let children play around the working area.
• Please confirm all parts are correct before starng the assembly process.
• Do not ghten all bolts and screws completely unl the enre unit has been assembled and set up.
• Be careful if using power tools as they can over ghten screws and strip threads.
WARNING
QTYCODE COMPONENTSCOMPONENTS
1A
CODE
B Glass TopTable Top Frame
1C Support Ring
QTY
1
D Legs4
B
C
D
D
D
D
5
5
2
3
4
Date: 10-28-2016
Page 2 of 2
Corbin Cocktail Table - Top Shelf Glass W/Round Boom Ring
Model #4327-880
CARE & MAINTENANCE
:
The touch of a so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
STEP 1 - Figure 1
Begin assembly by aaching Support Ring (C) to Legs (D) using
2 Allen Bolts (2), 2 Spring Washers (3) and 2 Flat Washers (4) per
leg. Do not ghten bolts at this me.
STEP 2 - Figure 2
Aach Legs (D) to Table Top Frame (A) using 2 Sunk Bolts (1) per
leg. Tighten all bolts from steps 1 and 2 with Allen Wrench (6)
provided.
STEP 3 - Figure 3
Aach Glass Pads (5) to tabs on Table Top Frame (A).
STEP 4 - Figure 4
Carefully place Glass Top (B) down into Table Top Frame (A). The
assembly is now complete.
C
2
3
4
FIGURE 1
1
1
FIGURE 2
D
A
D
D
D
D
5
5
FIGURE 3
A
D
D
D
D
B
A
FIGURE 4
/
