Minka Lavery 1845-108-L Operating instructions

Brand
Minka Lavery
Model
1845-108-L
Type
Operating instructions

This manual is also suitable for

Minka Lavery 1845-108-L is a ceiling-mounted light fixture designed for indoor use. It features a glass shield and a finial, and it can accommodate one light bulb (not included). The fixture's dimensions are not specified in the provided document, but it is likely to be suitable for use in small to medium-sized rooms. The fixture is easy to install and can be completed in 10 steps, as outlined in the installation instructions. Overall, the Minka Lavery 1845-108-L is a versatile and stylish light fixture that can add a touch of elegance to any room.

Minka Lavery 1845-108-L is a ceiling-mounted light fixture designed for indoor use. It features a glass shield and a finial, and it can accommodate one light bulb (not included). The fixture's dimensions are not specified in the provided document, but it is likely to be suitable for use in small to medium-sized rooms. The fixture is easy to install and can be completed in 10 steps, as outlined in the installation instructions. Overall, the Minka Lavery 1845-108-L is a versatile and stylish light fixture that can add a touch of elegance to any room.

INSTALLATION INSTRUCTIONS
Item#1845-84/108 (New. 08/16/2017)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig.1
Fig. 2
LA-2791E
HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the fixture from the carton and check that all
parts are included as shown in the illustration.
2. Shut off power at the circuit breaker and remove the old fixture
including the mounting hardware.
3. Position the mounting plate (C) on the ceiling and mark the
location of the three drywall anchors (A). Pre-drill the holes for
the drywall anchors (A). Then insert the drywall anchors (A) into
the ceiling.
4. Thread mounting screws (B) into the pre-drilled holes in
mounting plate (C). Spaced the same distance apart as the
holes in the ceiling pan (K) and secure with hex nut (D).
5. Attach mounting plate (C) to the outlet box using mounting
screws (F) (Size: #8-32N*L0.5”) and wood screws (E) into
drywall anchors (A). The side of the mounting plate marked
“GND” must face out.
CONNECTING THE WIRES (Fig. 2)
6. At this point, connect the electrical wires as shown in Fig. 2,
making sure that all wire connectors are secured. If your outlet
box has a ground wire (green or bare copper), connect the
fixture’s ground wire to it. Otherwise, connect the fixture’s
ground wire directly to the mounting plate using the green screw
provided. After wires are connected, tuck them carefully inside
the junction box.
COMPLETING THE INSTALLATION (Fig. 1)
7. Place the ceiling pan (K) onto the mounting screws (B) and
secure with the cap nuts (J).
8. Install the light bulb(s) (not included) in accordance with the
fixture’s specifications. (DO NOT EXCEED THE MAXIMUM
WATTAGE RATING!) (NE PAS DEPASSER LA PUISSANCE
NOMINALE MAXIMALE!).
9. Thread the nipple (M) to coupling (I) and tighten with hex nut
(L).
10. Place glass shield (N) over the nipple (M) and tighten with finial
(O).
Your installation is now complete. Return power to the junction box
and test the fixture.
Note: Illustration (Fig. 1) on this manual is for installation
purposes only. It may or may not be identical to the fixture
purchased.
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
Set#A-020-423
-Mounting Plate
-Ground Screw
-Mounting Screw*2
B
L
M
A
D
E
F
I
C
K
J
N
O
MIN 90℃ SUPPLY CONDUCTORS
  • Page 1 1

Minka Lavery 1845-108-L Operating instructions

Brand
Minka Lavery
Model
1845-108-L
Type
Operating instructions
This manual is also suitable for

Minka Lavery 1845-108-L is a ceiling-mounted light fixture designed for indoor use. It features a glass shield and a finial, and it can accommodate one light bulb (not included). The fixture's dimensions are not specified in the provided document, but it is likely to be suitable for use in small to medium-sized rooms. The fixture is easy to install and can be completed in 10 steps, as outlined in the installation instructions. Overall, the Minka Lavery 1845-108-L is a versatile and stylish light fixture that can add a touch of elegance to any room.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents