Delta 1914-SS-DST Specification

Delta
Brand
Delta
Model
1914-SS-DST
Type
Specification

This manual is also suitable for

COLD WATER TAPS
■ Beverage Faucet Collection
■ Single Handle Deck Mount
■ 1 Hole Sink Applications
■ Diamond Seal
®
Technology
■ Integrated Supply Tubes
■ Air Gap Included
■ Compatible with RO (Reverse Osmosis)
Systems
■ Traditional or Transitional Styles Available
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
•
9 1/4" (235 mm) high, 5" (127 mm) long, spout
swings 360˚.
•
Single lever handle design.
•
Diamond Seal
®
Technology.
•
Works with RO systems, filtered water systems, or as a cold
water tap.
•
Laminar water stream with maximum 1.50 gpm @ 60 psi,
5.7 L/min @ 414 kPa.
•
4" (102 mm) maximum deck thickness (2 3/4" (70 mm)
with air gap).
• Mounting wrench to assist in tightening mounting nut securely.
• Integrated supply tube with 3/8" compresssion fitting.
• Air gap included with 1/4" tube for RO system and 3/8" tube
for drain.
1914-DST▲
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2015 Masco Corporation of Indiana
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
DSP-K-1914-DST Rev. C
COMPLIES WITH:
•
ASME A112.18.1 / CSA B125.1
•
ASME A112.18.6
Indicates compliance to
ICC/ANSI A117.1
•
Verified compliant with .25% weighted average Pb
content regulations.
6 7/8"
(175 mm)
9 1/4"
(235 mm)
5"
(127 mm)
2 27/32"
(96 mm)
Min. 2 1/2" (64 mm)
Clearance to Back Splash
46"
(1168 mm)
37 1/2"
(953 mm)
2 39/64"
(66 mm)
3/8"
Compression
Fittings
1 1/8"
(29 mm)
▲ Designate proper finish suffix
2 7/32"
(56 mm)
8"
(203 mm)
38 3/4"
(984 mm)
4"
(102 mm)
2 3/4"
(70 mm)
WARRANTY
•
Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes:
or, for commercial users, for 5 years from
date of purchase.
•
5 year limited warranty on electronic parts
(other than batteries); or, for commercial
users, for 1 year from the date of purchase.
No warranty is provided on batteries.
  • Page 1 1

Delta 1914-SS-DST Specification

Delta
Brand
Delta
Model
1914-SS-DST
Type
Specification
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers