Sunstone B-SK20 Operating instructions

Type
Operating instructions
20-1/2" FRAME DEPTH
20-1/2" FRAME WIDTH
PRODUCT DESCRIPTION PRODUCT DIMENSIONS SPECIFICATIONS WARRANTY
16 Gauge 304 SS for Sink Frame, 20
Gauge 304 SS for Sink Basin, 18 Gauge
304 SS for Sink Cover
COMPONENT FINISH ------------3 YEARS
HANDLE------------------------------1 YEAR
DRAIN-------------------------------- 1 YEAR
12" HEIGHT w/HOOD
Over/Under 20" x 12" Height Single
Basin Sink w/Cover
20" Width SQ. x 12" Height
Drop-In Sink w/Cover
20-1/2" WIDTH x11-1/2" HEIGHT
x20-1/2" DEPTH (PRODUCT SIZE)
19-1/2" WIDTH x14" HEIGHT x19"
DEPTH (CUT-OUT)
Product Dimensions Product Features
10-1/4" INSIDE
HEIGHT W/COVER ON
OVER/UNDER VIEW
OVER COUNTER CUT-OUT SIZE IS
19-1/2" WIDTH BY 14" HEIGHT BY 19" DEPTH
INSTALL AS OVER
COUNTER
INSTALL AS UNDER
COUNTER
UNDER COUNTER CUT-OUT SIZE IS
19-1/4" WIDTH BY 15" HEIGHT BY 18-3/4" DEPTH
19-1/2" WIDTH
19-1/4" WIDTH
18-3/4" DEPTH
Up To 1-1/2"
Thick Counter
Up to 2-3/8"
Thick Counter
Product Installation
OVER/UNDER VIEW
OVER COUNTER INSTALL
Product Installation
INSTALL AS OVER
COUNTER
INSTALL AS UNDER
COUNTER
19' DEPTH
Up To 1-1/2"
Thick Counter
Up to 2-3/8"
Thick Counter
REMOVABLE LOWER
PANEL FOR THICKER
COUNTER TOPS
USE SCREW DRIVER
TO SECURE SINK CLIP
UP TIGHT AGAINST
COUNTER
INSTALL ALL FIXTURES
A MINIMUM 3" BACK
FROM CUT-OUT LINE
3"
UNDER COUNTER INSTALL
UNDERMOUNT SINK
SILICONE CAULKING
BETWEEN SINK RIM AND COUNTER
SECURE BRACKET BOLT
TO SURFACE USING EPOXY
KITCHEN SIZE DRAIN
17-1/2" WIDTH X
17-1/2" DEPTH
1 X DRAINS
14" HEIGHT
W/DRAIN
1-3/8" FLANGE
HEIGHT
EXTRA DEEP FLANGE
FOR COUNTERS UP TO
2-3/8" INCH THICK
1 LARGE COVER
SEE PRODUCT WARRANTY FOR DETAILS
EXACT MEASUREMENTS
  • Page 1 1

Sunstone B-SK20 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI