Renkforce RF-GM-X2 Owner's manual

Brand: Renkforce

Model: RF-GM-X2

Category: Mice

Type: Owner's manual

Renkforce RF-GM-X2: Experience precise control and enhanced gaming performance with this 4800 DPI backlit gaming mouse. Featuring 6 buttons and a scroll wheel, it offers customizable sensitivity settings for a tailored gaming experience. The optical sensor ensures accurate tracking on various surfaces, while the ergonomic design and side buttons provide added comfort and functionality during intense gaming sessions.

Page is loading ...

Operation

a) Connection and setup

• Place the mouse on a smooth, at surface of a sufcient size.

• The mouse's optical motion sensor may not work on some surfaces.

- No movement will be detected when the mouse is used on reective surfaces or glass.

- If the cursor does not move, try placing the mouse on a suitable mouse pad.

- Please note that the mouse may leave marks on delicate surfaces.

• Connect the USB plug on the mouse to a USB port on your computer. The mouse light will

turn on.

• The operating system will recognise the mouse as new hardware and install the necessary

drivers (these are included with the operating system).

b) Buttons and scroll wheel

Button Command

Left button Select, click; congure on operating system

Right button Open menu; congure on operating system

Scroll wheel with button Scroll; congure on operating system

Sensitivity button

(on top of mouse)

Sensitivity settings:

600 – 1200 – 2400 – 4800 dpi

Forwards and backwards buttons

(on the side of the mouse)

Go forwards or backwards, e.g. in a web browser

c) System-dependent settings

Open the mouse conguration menu on your operating system. Depending on your operating

system, you can congure additional settings such as the scroll wheel function.

Care and cleaning

• Disconnect the product from the computer before cleaning.

• Do not immerse the product in water.

• If the cursor doesn't move properly after you have used the mouse for a long period of time,

check whether the sensor on the bottom of the mouse is dirty.

If so, blow briey on the sensor or clean it with a soft, clean brush.

• Use a dry, lint-free cloth to clean the product.

• Do not use any abrasive or chemical cleaning agents.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the

household waste.

At the end of its service life, dispose of the product according to the relevant

statutory regulations.

You thus full your statutory obligations and contribute to the protection of the environment.

Technical data

Input voltage/current ..................... 5 V/DC, 500 mA via USB

USB .............................................. USB 2.0 and above

Sensitivity settings ........................ 600 / 1200 / 2400 / 4800 dpi

Motion detector ............................. Optical sensor

Cable length ................................. 175 cm

System requirements .................... Windows

XP (with SP1, SP2, SP3) (32-bit),

Vista (32/64-bit), 7 (32/64-bit), 8 (32/64-bit),

8.1 (32/64-bit), 10 (32/64-bit), RT;

Mac OSX 10.4 or later;

Linux Kernel 2.4 or later

Operating conditions ..................... -10 to + 50 °C, 10 – 85 % RH (non-condensing)

Storage conditions ........................ -20 to +60 °C, 10 – 95 % RH (non-condensing)

Dimensions (W x H x D) ............... 76 x 40 x 125 mm

Weight .......................................... 144 g

Operating instructions

4800 dpi backlit gaming mouse X2

Item no. 1491363

Intended use

Featuring 6 buttons, a scroll wheel and an easily adjustable sensitivity, this mouse is ideal for

gaming as well as normal computer operations.

For safety and approval purposes, you must not rebuild and/or modify this product. If you use

the product for purposes other than those described above, the product may be damaged. In

addition, improper use can cause hazards such as short circuits or re. Read the instructions

carefully and keep them. Make this product available to third parties only together with its

operating instructions.

This product complies with the statutory national and European requirements. All company

Delivery content

• Mouse

• Operating instructions

Up-to-date Operating Instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code

above. Follow the instructions on the website.

Explanation of symbols

The symbol with the exclamation mark in the triangle is used to highlight important

information in these operating instructions. Always read this information carefully.

Safety instructions

Read the operating instructions carefully and especially observe the safety

information. If you do not follow the safety instructions and information on

proper handling in this manual, we assume no liability for any resulting

personal injury or damage to property. Such cases will invalidate the warranty/

guarantee.

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. This may become

dangerous playing material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high

humidity, moisture, ammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and

protect it from any accidental use. Safe operation can no longer be guaranteed

if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height

can damage the product.

• Also observe the safety and operating instructions of any other devices which are

connected to the product.

• Consult an expert when in doubt about the operation, safety or connection of the

device.

• Maintenance, modications and repairs are to be performed exclusively by an

expert or at a qualied shop.

• If you have questions which remain unanswered by these operating instructions,

contact our technical support service or other technical personnel.

• Attention, LED light:

- Do not look directly into the LED light!

- Do not look into the beam directly or with optical instruments!

• Ensure that the cable does not present a trip hazard.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

Page is loading ...

Renkforce RF-GM-X2 Owner's manual

Brand: Renkforce

Model: RF-GM-X2

Category: Mice

Type: Owner's manual

Download PDF

report

in other languages

français: Renkforce RF-GM-X2 Le manuel du propriétaire
Deutsch: Renkforce RF-GM-X2 Bedienungsanleitung
Nederlands: Renkforce RF-GM-X2 de handleiding

Renkforce RF-GM-X2 Owner's manual

Renkforce RF-GM-X2 Owner's manual

in other languages

Related papers

Other documents