Car Mini LED Display
Model: C16128
Car Mini LED Display model C16128
Thank you for choosing our products
Packaging list
- One Mini LED display model C16128 red green yellow
- Two USB cable
- Four Air vacuum cups
- One 12v Cigar jack charger
- One 110v charges
- One internal Poly-Lion Battery with 2,300mAh
Specifications：LED Car message sign board C16128 three colors RED, GREEN, YELLOW
Pixels： 16*128
Spacing: 2.5 mm
Language: Support world languages
Effects: Left direction subtitle
Right Direction subtitle
Snow Effect
Flash Effect
Blinking Effect
Fixed
Up and down Effect
Frame Size: 550 x 100 x 20 mm
Screen Size: 520 x 78 mm
Brightness: 4 levels (25%, 50%, 75%, 100%)
Speed: Five Levels
Battery Type: Poly-Lion Battery with 2,300mAh -Charging Time: 2-3hours, AC110-220V
Switches: On/Off, Brightness, Message Selection
Support: Windows Vista, 7 and 8
Installing Drivers
1- Choose the PL-2303 driver that is compatible for your windows
2- Connect the sign and make sure that you can see the sign in your Device manager (Figure 1)
Figure 1
3- Run “Mini LED Display” software
Send all messages to sign
Send Single message to sign
6 Messages 256 characters each Change Text / Image/Date Effects Speed Message display
You can choose all the messages Control Control Duration
To be displayed or just one using
The button on the side of the sign
Figure 3
Figure 2
Figure 3
- How to charge my Led sign
-It’s required to recharge the sign whenever the power is running out or brightness reduced obviously.
Please follow below steps:
a- Turn off Led sign
b- Connect sign to charger and an indicator lamp lighted
c- Battery will be fully charged after around 3 hours
- Common questions
- What should we do if computer alarmed with “troy’s virus”?
This only happened when your computer is installed with “360 virus killer” software,
Please chose trust this program then continue
-What should we do if the com interface does not show up after led sign installed on computer?
Check if the driver software is installed properly, and if it is first time install driver software, please re-connect data
cable and let it install automatically
-What should we do if the program is jammed or shut down?
Please make sure all content has to be sent completely before pulling out the led Sign.
/