Minka Group 72382-66-L User manual

Minka Group
Brand
Minka Group
Model
72382-66-L
Type
User manual

This manual is also suitable for

Minka Group 72382-66-L is a lighting fixture designed for indoor use. It features an integrated LED module with a power of 10W, providing ample illumination for various spaces. The fixture's sleek design and durable construction make it suitable for both residential and commercial applications. With its easy installation process, you can quickly enhance the ambiance of your living room, bedroom, or office with this versatile lighting solution.

Minka Group 72382-66-L is a lighting fixture designed for indoor use. It features an integrated LED module with a power of 10W, providing ample illumination for various spaces. The fixture's sleek design and durable construction make it suitable for both residential and commercial applications. With its easy installation process, you can quickly enhance the ambiance of your living room, bedroom, or office with this versatile lighting solution.

INSTALLATION INSTRUCTIONS
For Model 72381-66-L;72382-66-L;72383-66-L
WA R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
Fig. 2
Fig. 3
H
A
NGING THE FI
XTURE (Fig.
1
)
1. Shut off the power at the circuit breaker and remove
the old fixture, including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts on a clear area. Take care not to lose any small
parts necessary for installation.
3. Attach the crossbar (C) to outlet box (A) (not supplied)
with mounting screws (B) (Size: #8-32*0.78"L)
4. Thread all thread (D) into crossbar (C) and secure
with hex nut provided (J). Note: The length of all
thread (D) into crossbar (C) may be adjusted if
necessary.
CONNECTING THE WIRES (Fig. 2)
5. Connect the electrical wires as shown in Fig.2
making sure that all wire connectors are secured. If
your outlet box has a ground wire (green or bare
copper), connect the fixture’s ground wire to it.
Otherwise, connect the fixture’s ground wire directly
to crossbar using green screw provided.
COMPLETING THE INSTALLATION (Fig. 1)
6. Remove frame (I) by loosening the 4 screws (G).
Place backplate (E) overall thread (D) and secure with
decorative nut (F).
7. Use the 4 screws (G) to secure frame (I) back onto
backplate (E).
8. To prevent moisture from entering outlet box and
causing a short, use clear caulking (i.e.
Indoor/Outdoor Silicone Sealant) to outline the
outside of fixture backplate where it meets the wall
leaving a space at bottom to allow moisture a means
to escape. (Fig. 3)
9. Bulb (H) information: Integrated LED module
1 x AC LED 6W included for 72381-66-L.
1 x AC LED 10W included for 72382-66-L; 72383-66-L.
DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
(NE PAS DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
Your installation is now complete. Return power to the
junction box and test the fixture.
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green or
Bare
Copper
(Ground)
Caulking
Backplate
  • Page 1 1

Minka Group 72382-66-L User manual

Minka Group
Brand
Minka Group
Model
72382-66-L
Type
User manual
This manual is also suitable for

Minka Group 72382-66-L is a lighting fixture designed for indoor use. It features an integrated LED module with a power of 10W, providing ample illumination for various spaces. The fixture's sleek design and durable construction make it suitable for both residential and commercial applications. With its easy installation process, you can quickly enhance the ambiance of your living room, bedroom, or office with this versatile lighting solution.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI