Angel Sar AA000155 Installation guide

Type
Installation guide
Read this assembly manual carefully, and verify that you have all the parts listed before you begin.
Keep your assembly manual for future reference.
Move this chair gently with 2 persons.
Protect finishes by placing furniture pieces on a soft carpeted surface during assembly.
Do not place very hot/cold objects on top of any surface. Never
leave liquids on the surface: Clean
immediately with a mild soap and a damp cloth. Never use
scouring powder based cleanser. Don't
touch the chair surface with a hard/acute object may
cause the chair to damage
DO NOT ASSUME CHILD SAFETY WITH ANY PIECE OF FURNITURE!
Do not allow children to climb on furniture. Improper use can cause death or serious injury.
Damaged parts or furniture put together incorrectly can lead to serious injuries. Make sure to follow
instructions correctly.
JST3002-2
JST3006-2
Important Note:
*Place all parts on a clean and smooth surface such as
a rug or carpet to avoid the parts from being scratched.
*Kindly follow the assembly instruction step by step.
*Don't tighten all screws until the table is fully set-up.
Important
Please inspect all items carefully before assembling.
If for any reason you need to return this
item, you must return it in its original packaging.
Assembled items can not be returned .
JST3002
JST3006
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Angel Sar AA000155 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI