Wireless Network Connection:
a. From the Home screen, select Settings > Network > Wi-Fi.Your Amazon Fire TV device
automatically detects nearby Wi-Fi networks that broadcast their network name. Some
networks are open for everyone to join, while others require a password to connect.
b. Under Available Networks, select a wireless network and enter the network password (if
required) using the onscreen keyboard. You can also use the keyboard in the Fire TV Remote
App.
*In the initial setup flow after remote paring screen, network page will show and device will
automatically scan for network no need to setting button. refer fig.8 and fig.9
TIP:
• For optimal wireless performance, do not place your Amazon Fire TV in an enclosed cabinet, as it
impacts signal strength to the device, remote, and game controllers.
• For Fire TV, if you are switching from a wired to a wireless connection, disconnect the Ethernet
cable from your Amazon Fire TV device before switching to a wireless connection.
3.) WPS button (Wi-Fi Protected Setup) refer fig.10,and fig.11
a.) For select routers, it is possible to establish connection between the TV and the router without
the need for a password. Refer to the router user manual for more details.
b.) Press the navigation button (4) and select 'Connect using WPS Push Button', then press the
select button (3) to confirm.
c.) Press the WPS button on the router. The TV will connect to the router automatically without the
use of a password.