Oatey 31270 Installation guide

Type
Installation guide
EPOXY PUTTY- How to Use
GENERAL INFORMATION:
Oatey Epoxy Putty is a multi©purpose sealing, patching, and mending compound. It should be considered a
temporary, as opposed to a permanent, repair job. The steel filled formula mixes easily in your hand © just cut off
the amount you need for the job.
APPLICATION:
All surfaces must be as dry and clean as possible. Remove Oatey Epoxy Putty from the protective plastic tube.
Cut off the desired amount with a sharp knife. Knead the putty in your hand until it turns a uniform color (light
gray). Apply mixture to the surface with hand or putty knife. Smooth surface of putty before it hardens.
CAUTIONS AND RESTRICTIONS:
Adhesion of Oatey Epoxy Putty is only fair to poor on wet surfaces. Permanent repairs should be considered as
soon as possible. This product can be irritating to skin, eyes and respiratory system. See Material Safety Data
Sheet for complete details.
3/26/03 9:51 AMHow To Use Caulks 30270
Page 1 of 1
  • Page 1 1

Oatey 31270 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI