2. Husky
  3. H4TR2R

Husky H4TR2R Installation guide

  • Hello! I've reviewed the user manual for the Cabinet, Cabinet handle, Fixed caster, and Swivel caster. This manual provides guidance on assembling the cabinet with the included parts and hardware. It contains step-by-step instructions for attaching the handle and casters, also lists the required hardware. I'm ready to answer any questions you have about the assembly process or specific parts.
  • Where are the keys located?
    What is attached with the M6 x 16 bolts?
    What is attached with the M8 x 25 bolts?
    Do the holes in the cabinet require nuts?
Package Contents
NOTE: The keys are taped to the top of the
plastic bag.
Part Description Quantity
A
B
C
Cabinet 1
Cabinet handle 1
D
2
2
Swivel caster
Fixed caster
4
B
A
C
D
Assembly
CAUTION: Do not over tighten the bolts.
1
Attaching the cabinet handle
□Position the cabinet handle (B) over the holes on the
cabinet (A).
□Attach with the bolts (BB) and tighten with a
wrench (DD).
NOTE
The holes in the cabinet are tapped and do not
require nuts.
A
B
BB
Attaching the casters
□Be sure the drawers are locked and lay the cabinet (A)
□ emas eht no ,tinu eht ot )D( sretsac leviws eht hcattA
side as the handle, inserting bolts (AA) through the swivel
casters(D) and spacers (CC) and into the cabinet (A).
□Tighten with a wrench (DD).
□Repeat this process for the xed casters (C) on the
opposite side of the cabinet (A).
□Return the cabinet (A) to its upright position.
2
A
CC
D
AA
Pa ckage Contents
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description
BB
AA
CC
M8 x 25 bolt
M6 x 16 bolt
Spacer
16
16
4
DD Wrench 1
Quantity
AA BB CC DD
/