2. Cumberland
  3. POWERTRAK

Cumberland POWERTRAK Owner's manual

  • Hello! I've reviewed the instructions for the Cumberland PowerTrak Wiring Harness connection to a 3-wire controller. This document provides guidance on disconnecting the original wiring and connecting the new harness, including control and power wires. I'm ready to answer questions related to the instructions.
  • What should I disconnect first?
    What color wires are used for Farm Hand Controls?
    What color wires are used to supply power?
Date: 12-29-22 V3.0 4801-0153
Instructions
1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421
4801-0153
Page 1 of 1
Printed in the USA
Copyright © 2022 by The GSI Group, LLC
www.cumberlandpoultry.com CN-409077
PowerTrak™ Wiring Harness
9 Conductor PowerTrak™ Connection to 3 Wire Controller
If you have a standard PowerTrak™ with a PCB-135A circuit board:
1. Disconnect the nine conductor wire, limit switch and motor harness from the board.
2. Plug the harness provided into the motor and limit switch harness.
3. Use Yellow (COM), Red (CLOSE) and Brown (OPEN) control wires for Farm Hand Controls.
4. Use Green (GROUND), Black (HOT) and White (Neutral) wires to supply 120V/240V power
(depending on model) to the PowerTrak™.
5. Attach the supplied label to the inside of the PowerTrak™ door for future reference.
/