Life Fitness 9100 Series User manual

Brand: Life Fitness

Model: 9100 Series

Type: User manual

This manual is also suitable for

Treadmill 9100 Series

Life Fitness Treadmill 9100 Series

Life Fitness Treadmill 9100 Series lets you enjoy an effective and enjoyable home workout. Its innovative features and sturdy construction provide a wide range of exercise options to help you achieve your fitness goals.

With its powerful motor and durable design, the 9100 Series treadmill can withstand even the most intense workouts. The spacious running deck offers ample room for comfortable strides, while the adjustable incline and speed settings allow you to customize your workout intensity.

The 9100 Series treadmill is also equipped with advanced technology to enhance your fitness experience. The intuitive console provides real-time feedback on your progress, including speed, distance, time, and calories burned. You can also choose from a variety of pre-programmed workouts or create your own to target specific fitness goals.

Life Fitness Treadmill 9100 Series

Figure 1

MO51-00K26-A262

Figure 2

Life Fitness Model 9100 Series Treadmill

How To…INSTALL WAX NOZZLE BRACE

Tools Required: Hex Key wrench set, combination wrench set. GK26-00002-0060

Step 1

Turn the ON/OFF switch to the OFF position and disconnect the line-cord from the wall receptacle.

Step 2

Remove the 4 SCREWS securing the MOTOR SHROUD. Remove MOTOR SHROUD and set aside.

Step 3

Remove the tension from the STRIDING BELT by turning each ROLLER TENSION BOLT eight rotations in a

counter clockwise direction.

Step 4

Remove the 4 SCREWS and WASHERS securing the DECK. Remove the DECK.

Step 5

Remove and clean the WAX NOZZLE. Set it aside to be re-installed later.

Step 6 ( Figure 1)

Shift STRIDING BELT to one side to gain access to the WAX NOZZLE BRACKET. Using the NOZZLE BRACE as

a gauge, hold it flush against the bottom of the WAX NOZZLE BRACKET and position it against the angle of the

BRACKET TAB. This will determine the amount of bend required to change the angle of the BRACKET TAB so that

it matches the angle on the NOZZLE BRACE.

Step 7 (Figure 2)

Position a 9/16 box end wrench over the cylinder portion

of the BRACKET TAB and gently bend to the determined

amount from Step 6.

Step 8 ( Figure 1)

Insert NOZZLE BRACE to ensure that the WAX NOZZLE

BRACKET is bent to the proper angle.(Repeat steps 6

and 7 as required.)

Step 9 ( Figure 1)

Center the NOZZLE BRACE against the BRACKET TAB

and secure the NOZZLE BRACE to the WAX NOZZLE

BRACKET with 2 TINNERMAN CLIPS. The TINNERMAN

CLIPS should be flush with both the WAX NOZZLE

BRACKET and NOZZLE BRACE.

Step 10

Re-install cleaned WAX NOZZLE.

Step 11

Install the deck and secure with mounting bolts.

Step 12

Center STRIDING BELT, then tension by turning each REAR

ROLLER TENSION BOLT eight rotations in a clockwise

direction.

Step 13

Re-install the MOTOR SHROUD and secure with 4 screws.

Step 14

Track or tension STRIDING BELT as necessary. Refer to

“How To“ in a Service or Operation manual for proper

procedure.

Tinnerman

Clips

Nozzle

Brace Wax Nozzle

Bracket

Direction

Of Bend

Wax Nozzle

Bracket

9/16 Box

Wrench

Bracket Tab

Life Fitness 9100 Series User manual

Brand: Life Fitness

Model: 9100 Series

Type: User manual

This manual is also suitable for

Treadmill 9100 Series

Life Fitness Treadmill 9100 Series

Download PDF

report

Life Fitness 9100 Series User manual

This manual is also suitable for

Life Fitness 9100 Series User manual

Related papers

Other documents