Classic Accessories 73112 Owner's manual

Classic Accessories
Brand
Classic Accessories
Model
73112
Type
Owner's manual

This manual is also suitable for

Classic Accessories 73112 is a standup patio heater cover designed to protect your heater from the elements. It is made of a durable, water-resistant material and features a zippered closure for easy installation and removal. The cover also has a rip-and-grip closure at the bottom to keep it securely in place.

This cover is suitable for both round and square base standup patio heaters. It is important to note that this cover is not suitable for heaters with square bases.

To install the cover, simply unzip it all the way from the top to the bottom and around the top. Then, undo the rip-and-grip closure at the bottom of the cover. Using a stepladder, carefully slip the cover over the top of the heater and zip it closed around the top. Now, zip the cover closed up from the heater base. Finally, close the rip-and-grip closure at the bottom of the heater.

Classic Accessories 73112 is a standup patio heater cover designed to protect your heater from the elements. It is made of a durable, water-resistant material and features a zippered closure for easy installation and removal. The cover also has a rip-and-grip closure at the bottom to keep it securely in place.

This cover is suitable for both round and square base standup patio heaters. It is important to note that this cover is not suitable for heaters with square bases.

To install the cover, simply unzip it all the way from the top to the bottom and around the top. Then, undo the rip-and-grip closure at the bottom of the cover. Using a stepladder, carefully slip the cover over the top of the heater and zip it closed around the top. Now, zip the cover closed up from the heater base. Finally, close the rip-and-grip closure at the bottom of the heater.

CAUTION!
Let your heater cool before
you put your cover on.
Installation
Check your standup heater to
make sure there are no sharp
objects or corners that could
stress your cover as you pull
it on.
Completely unzip your cover
all the way from the top to the
bottom and around the top.
Undo the rip-and-grip closure at
the bottom of your cover.
Using a stepladder, carefully slip
your cover over the top of the
heater and zip it closed around the
top. Now zip your cover closed up
from the heater base. Close the
zipper together at the bottom of
your cover. Then zip your cover up
to the top of your heater. Close the
rip-and-grip closure at the bottom
of your heater.
Cleaning and Care
Clean your cover with a soft brush
and luke-warm water. DO NOT
USE SOAP as it may remove the
protective coatings added by the
factory. Air dry.
Storage
To avoid any possibility of mildew
be sure your cover is completely
dry before you store it in an
enclosed area for a long period.
Three Year Warranty
This cover is factory warranted for
workmanship and materials for
three years after purchase.
Instructions: Standup Patio Heater Cover
08cH5571952
This cover will fit both
round or square base
standup patio heaters.
ATTENTION!
Laissez votre chauffe-patio
refroidir avant d’installer la
housse.
Installation
Vérifiez votre chauffe-patio afin
de vous assurer qu’il n’y a pas de
bords ou d’objets pointus risquant
d’étirer la housse lorsque vous
tirez sur cette dernière.
Ouvrez complètement la housse
en ouvrant la fermeture à glissière
de haut en bas et autour du haut.
Décrochez le fermoir situé au bas
de la housse.
En vous tenant debout sur un
escabeau, glissez la housse
avec précaution sur le dessus
du chauffe-patio et fermez la
housse en tirant sur la fermeture
à glissière autour du haut du
chauffe-patio. Fermez la housse à
partir du socle du chauffe-patio en
joignant la fermeture à glissière.
Ensuite, fermez la fermeture à
glissière de bas en haut jusqu’en
haut du chauffe-patio. Terminez
l’installation en encliquetant le
fermoir situé au bas du chauffe-
patio.
Nettoyage et entretien
Nettoyez la housse à l’aide d’une
brosse à soies douces et de l’eau
tiède. NE PAS UTILISER DE SAVON
car ceci risquerait d’endommager
le revêtement protecteur qui a été
ajouté en usine. Pour faire sécher la
housse, accrochez-la sur une ligne
de séchage ou placez-la dans le
sèche-linge en réglant la machine
sur « air » ou sur un cycle de
séchage sans chaleur pour articles
délicats uniquement.
Remisage
Pour éviter toute apparition de
moisissure, assurez-vous que la
housse est complètement sèche
avant de la ranger dans un endroit
fermé pour une longue période.
Garantie de trois ans
Cette housse est garantie par
l’usine contre tout vice de
matériau et de fabrication pendant
une durée de trois ans à partir de
la date d’achat.
Mode d’emploi: Housse de chauffe-patio
08cH5571952
Cette housse convient
aux chauffe-patios à socle
rond ou carré.
CAUTION!
Let your heater cool before
you put your cover on.
Installation
Check your standup heater to
make sure there are no sharp
objects or corners that could
stress your cover as you pull
it on.
Completely unzip your cover
all the way from the top to the
bottom and around the top.
Undo the rip-and-grip closure at
the bottom of your cover.
Using a stepladder, carefully slip
your cover over the top of the
heater and zip it closed around the
top. Now zip your cover closed up
from the heater base. Close the
zipper together at the bottom of
your cover. Then zip your cover up
to the top of your heater. Close the
rip-and-grip closure at the bottom
of your heater.
Cleaning and Care
Clean your cover with a soft brush
and luke-warm water. DO NOT
USE SOAP as it may remove the
protective coatings added by the
factory. Air dry.
Storage
To avoid any possibility of mildew
be sure your cover is completely
dry before you store it in an
enclosed area for a long period.
Three Year Warranty
This cover is factory warranted for
workmanship and materials for
three years after purchase.
Instructions: Standup Patio Heater Cover - Round Base
08cH5573112
This cover will fit standup
patio heaters with round
bases (A). It will not fit
heaters with Square
bases (B).
(A) (B)
ATTENTION!
Laissez votre chauffe-patio
refroidir avant d’installer la
housse.
Installation
Vérifiez votre chauffe-patio afin
de vous assurer qu’il n’y a pas de
bords ou d’objets pointus risquant
d’étirer la housse lorsque vous
tirez sur cette dernière.
Ouvrez complètement la housse
en ouvrant la fermeture à glissière
de haut en bas et autour du haut.
Décrochez le fermoir situé au bas
de la housse.
En vous tenant debout sur un
escabeau, glissez la housse
avec précaution sur le dessus
du chauffe-patio et fermez la
housse en tirant sur la fermeture
à glissière autour du haut du
chauffe-patio. Fermez la housse à
partir du socle du chauffe-patio en
joignant la fermeture à glissière.
Ensuite, fermez la fermeture à
glissière de bas en haut jusqu’en
haut du chauffe-patio. Terminez
l’installation en encliquetant le
fermoir situé au bas du chauffe-
patio.
Nettoyage et entretien
Nettoyez la housse à l’aide d’une
brosse à soies douces et de l’eau
tiède. NE PAS UTILISER DE SAVON
car ceci risquerait d’endommager
le revêtement protecteur qui a été
ajouté en usine. Pour faire sécher la
housse, accrochez-la sur une ligne
de séchage ou placez-la dans le
sèche-linge en réglant la machine
sur « air » ou sur un cycle de
séchage sans chaleur pour articles
délicats uniquement.
Remisage
Pour éviter toute apparition de
moisissure, assurez-vous que la
housse est complètement sèche
avant de la ranger dans un endroit
fermé pour une longue période.
Garantie de trois ans
Cette housse est garantie par
l’usine contre tout vice de
matériau et de fabrication pendant
une durée de trois ans à partir de
la date d’achat.
Mode d’emploi: Housse de chauffe-patio - Socle rond
08cH5573112
Cette housse conviendra
aux chauffe-patios à
socle rond (A). Elle ne
conviendra pas aux
chauffe-patios à socle
carré (B).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Classic Accessories 73112 Owner's manual

Classic Accessories
Brand
Classic Accessories
Model
73112
Type
Owner's manual
This manual is also suitable for

Classic Accessories 73112 is a standup patio heater cover designed to protect your heater from the elements. It is made of a durable, water-resistant material and features a zippered closure for easy installation and removal. The cover also has a rip-and-grip closure at the bottom to keep it securely in place.

This cover is suitable for both round and square base standup patio heaters. It is important to note that this cover is not suitable for heaters with square bases.

To install the cover, simply unzip it all the way from the top to the bottom and around the top. Then, undo the rip-and-grip closure at the bottom of the cover. Using a stepladder, carefully slip the cover over the top of the heater and zip it closed around the top. Now, zip the cover closed up from the heater base. Finally, close the rip-and-grip closure at the bottom of the heater.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents