Patton electronics Patton SmartNode 2300 Series Hardware Reference Note

Type
Hardware Reference Note

This manual is also suitable for

Patton electronics Patton SmartNode 2300 Series is a gateway for analog, BRI ISDN, and T1/E1 PRI devices to connect them to a VoIP network. It is also a SIP registrar and proxy server for up to 1000 users.

The SmartNode 2300 Series offers a wide range of features and capabilities, including:

  • VoIP support: The SmartNode 2300 Series supports a variety of VoIP protocols, including SIP, H.323, and MGCP.
  • Analog support: The SmartNode 2300 Series supports up to four analog phone lines.
  • BRI ISDN support: The SmartNode 2300 Series supports up to four BRI ISDN lines.
  • T1/E1 PRI support: The SmartNode 2300 Series supports up to one T1/E1 PRI line.

Patton electronics Patton SmartNode 2300 Series is a gateway for analog, BRI ISDN, and T1/E1 PRI devices to connect them to a VoIP network. It is also a SIP registrar and proxy server for up to 1000 users.

The SmartNode 2300 Series offers a wide range of features and capabilities, including:

  • VoIP support: The SmartNode 2300 Series supports a variety of VoIP protocols, including SIP, H.323, and MGCP.
  • Analog support: The SmartNode 2300 Series supports up to four analog phone lines.
  • BRI ISDN support: The SmartNode 2300 Series supports up to four BRI ISDN lines.
  • T1/E1 PRI support: The SmartNode 2300 Series supports up to one T1/E1 PRI line.
SmartNode Series
PMC
Hardware Reference Note
Document Number:
132012U Rev. B
Part Number:
07SNPMC-RN
Revised:
April 19, 2006
Sales Office:
+1 (301) 975-1000
Technical Support:
+1 (301) 975-1007
E-mail:
WWW:
www.patton.com
2
PMC Hardware Reference Note
Patton Electronics Company, Inc.
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
tel: +1 (301) 975-1000
fax: +1 (301) 869-9293
support: +1 (301) 975-1007
url: www.patton.com
Copyright Statement
Copyright © 2005–2006, Patton Electronics Company. All rights reserved.
Trademark Statement
The terms SmartWare, SmartView, and SmartNode are trademarks of Patton Electronics
Company. All other trademarks presented in this document are the property of their
respective owners.
Notices
The information contained in this document is not designed or intended for use as critical
components in human life-support systems, equipment used in hazardous environments,
or nuclear control systems. Patton Electronics Company disclaims any express or implied
warranty of fitness for such uses. The information in this document is subject to change
without notice. Patton Electronics assumes no liability for errors that may appear in this
document. Any software described in this document is furnished under license and may
be used or copied only in accordance with the terms of such license.
PMC Hardware Reference Note
3
1.0 Internal 48V Power Supply Unit for SN2300
1.1 Instructions
See
Getting Started Guide
, chapter 8, “Line power module installation.”
2.0 Internal 40V Power Supply Unit for SN2400
2.1 Instructions
See
Getting Started Guide
, chapter 8, “Line power module installation.”
3.0 External 40V Power Supply Unit for
SN1200 and SN1400
3.1 Instructions
See
Getting Started Guide
, chapter 8, “Line power module installation.”
Item Part Number Description
PM-48V-Int SN-PM-48V-INT 48 VDC power module for ISDN and analog lines, internal mounting in an SN2300 with
IC-4BRV or IC-4FXS. For the IC-4BRV it is an option to power the ISDN phones. For the
IC-4FXS, it is required to power analog phones. Input 110–240 VAC; Output 48
VDC, 30W.
Item Part Number Description
PM-40V-Int SN-PM-40V-INT 40 VDC power module for ISDN and analog lines, internal mounting in an SN2400 with
IC-4BRV or IC-4FXS. For the IC-4BRV it is an option to power the ISDN phones. For the
IIC-4FXS, it is required to power analog phones. Input 110–240 VAC; Output 48
VDC, 30W.
Item Part Number Description
PM-BRI-Ext
(230V) SN-PM-BRI-EXT/EUR 40 VDC power line module for ISDN and analog power line; external mounting. For
SN1200 and SN1400. Input 230 VAC; Output 40 VDC, EU/Swiss connector.
PM-BRI-Ext
(120V) SN-PM-BRI-EXT 40 VDC power line module for ISDN and analog power line; external mounting. For
SN1200 and SN1400. Input 120 VAC; Output 40 VDC, US connector.
4
PMC Hardware Reference Note
4.0 Interface Cards
4.1 Instructions
In the
SmartNode 1000 and 2000 Series VoIP Media Gateways Getting Started Guide
, see the section “Interface
cards descriptions” in chapter 1. Also consult chapter 9 for the installation of the card.
Item Part Number Description
IC-E1V SN-ICE1V PMC interface card for mounting in the SN2300 or SN2400 expansion slots providing one
PRI E1 port to support 30 VoIP calls.
IC-T1V SN-ICT1V PMC interface card for mounting in the SN2300 or SN2400 expansion slots providing one
PRI T1 port to support 23 VoIP calls.
IC-4BRV SN-IC4BRV PMC interface card for mounting in SN2300 or SN2400 expansion slots providing four BRI/
S0 ISDN ports to support 8 VoIP calls.
Internal Line Power Module PM-48V-Int (SN2300), PM-40V-Int (SN2400), or external
power supply PM-BRI-Ext can be used as an option to power ISDN phones.
IC-4FXS SN-4FXS PMC interface card for mounting in SN2300 or SN2400 expansion slots providing four ana-
log phone ports and eight DSP channels.
Requires Internal Line Power Module PM-48V-Int (SN2300) or PM-40V-Int (SN2400).
IC-4BRV-8VRSN-IC4BRV-8VR PMC that is an 8-channel gateway interface card for ISDN BRI/S0 with hardware bypass
(emergency) relay. For use in the SN2000 series expansion slots.
IC-E1V-0 SN-ICE1V-0 PMC that is an E1 gateway interface card for ISDN PRI-circuit switching only. For use in
SN2000 series expansion slots. NT/TE configurable.
IC-E1V-15 SN-ICE1V-15 PMC that is a 15-channel gateway interface card with one ISDN PRI/S2m port. NT/TE con-
figurable. Supports these voice codecs (G.711, G.726, G.723, G.729ab). For use in SN2000
series expansion slots.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Patton electronics Patton SmartNode 2300 Series Hardware Reference Note

Type
Hardware Reference Note
This manual is also suitable for

Patton electronics Patton SmartNode 2300 Series is a gateway for analog, BRI ISDN, and T1/E1 PRI devices to connect them to a VoIP network. It is also a SIP registrar and proxy server for up to 1000 users.

The SmartNode 2300 Series offers a wide range of features and capabilities, including:

  • VoIP support: The SmartNode 2300 Series supports a variety of VoIP protocols, including SIP, H.323, and MGCP.
  • Analog support: The SmartNode 2300 Series supports up to four analog phone lines.
  • BRI ISDN support: The SmartNode 2300 Series supports up to four BRI ISDN lines.
  • T1/E1 PRI support: The SmartNode 2300 Series supports up to one T1/E1 PRI line.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI