Proper Use
Flip backward-armrest
1. Move up slowly. ↓ 2. Move backward to the end. ↓
Adjusting the height of Foot Plate:
1. Turn the footplate in the direction of the arrow and adjust the height.
Tighten the nut at the side of the step pipe with the spanner provided.
2. Adjust the height of the foot rest according to the length
of your leg. (provide own picture). →
Using the brake:
1. Toggle both brake levers backwards to lock chair. To release the brake,
toggle it forward.
2. Brakes at the handles are only for reducing speed. Remember to apply
both brakes simultaneously. To lock the chair, the brake levers must be
applied.
Brake: Push forward. ↓ 2. hold with both hands. ↓
(MF-5620AB & MF-5620A-AB)
7
Care & Maintenance
1. Do regular checks to ensure that bolts, nuts, brakes, wheels and other
components are intact and tightened.
2. The tyre should have enough air in it to maintain air pressure.
3. Use a damp cloth to wipe away dirt on wheelchair. Dry with a dry cloth to
prevent rusting.
Specification
All dimensions are based on the wheelchair in its default Configuration
Aluminium frame in sliver paint
Attendant brakes
2x detachable swing away foot rests
8” front wheels & 22” rear wheels
Seat height 50cm
Seat width 45cm&50cm
Weight limit 100kg
Weight of wheel chair is 13.5kg
Packing List
Each wheelchair comes with,
1. Spanner
2. Instruction manual
3. Detachable swing away foot rest
4. Wheelchair frame with fixed armrest
8