Pro-Elec PEL01622 Operating instructions

Pro-Elec
Brand
Pro-Elec
Model
PEL01622
Type
Operating instructions

This manual is also suitable for

Pro-Elec PEL01622 is a linkable LED light fitting with an 873mm length, 10W wattage, and 1000lm lumens. It has a color temperature of 3000K, which produces a warm white light. This product is energy efficient, with an energy efficiency class of E. It is suitable for use in a variety of indoor lighting applications, such as offices, shops, and homes. The fitting can be easily installed by following the included instructions. It is important to note that the fitting should be installed by a qualified electrician.

Pro-Elec PEL01622 is a linkable LED light fitting with an 873mm length, 10W wattage, and 1000lm lumens. It has a color temperature of 3000K, which produces a warm white light. This product is energy efficient, with an energy efficiency class of E. It is suitable for use in a variety of indoor lighting applications, such as offices, shops, and homes. The fitting can be easily installed by following the included instructions. It is important to note that the fitting should be installed by a qualified electrician.

1
LED LIGHT FITTING - LINKABLE
Voltage 220-240V~50Hz
Lamp type LED T8 tube (see below)
Model Length Wattage Colour Temp Lumens
PEL01618-E 313mm 4W 3000K 400lm
PEL01619-E 313mm 4W 4000K 400lm
PEL01620-E 573mm 8W 3000K 800lm
PEL01621-E 573mm 8W 4000K 800lm
PEL01622-E 873mm 10W 3000K 1000lm
PEL01623-E 873mm 10W 4000K 1000lm
PEL01624-E 1173mm 14W 3000K 1400lm
PEL01625-E 1173mm 14W 4000K 1400lm
6500K► Daylight
5000K► Natural White
4100K► Cool White
3500K► Warm White
2700K► Soft White
These products contain a light source of energy eciency class E
2
• Turn o or isolate the mains supply.
• Oer the unit to the surface in the desired position in relation to the mains supply
wiring.
• Mark where the locating clips are required with reference to any hidden cables or
pipework, wall battens etc.
Note: the clips can be used anywhere along the length of the tting.
• Place the clips where marked and mark the position of the mounting holes.
• Drill the surface where marked and t wall plugs if required.
• Screw the clips to the surface.
• Press the tting onto the clips ensuring it is rmly located.
• Plug in the mains supply lead to the socket on the end of the tting.
• Connect the mains supply wiring as follows:
Connect the positive wire (brown) to the mains live (L) supply.
Connect the neutral wire (blue) to the mains neutral (N) supply.
Note: If the tting is an extension of a previous installation connect a link cable between
the existing tting and the new one noting the dierence between input and output
connectors.
• Restore the mains supply.
CLEANING AND MAINTENANCE
• Clean only with a damp cloth with a little liquid detergent. Do not use any
chemicals, abrasives or solvents that may damage the product.
INSTALLATION
IMPORTANT SAFETY INFORMATION
• When using electrical appliances basic safety precautions should always be
followed.
• Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
• Ensure the surface can support the weight of the tting.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area. Made in China
PO Box 13362 Dublin 2
PR2 9PP
Man Rev 1.1
  • Page 1 1
  • Page 2 2

Pro-Elec PEL01622 Operating instructions

Pro-Elec
Brand
Pro-Elec
Model
PEL01622
Type
Operating instructions
This manual is also suitable for

Pro-Elec PEL01622 is a linkable LED light fitting with an 873mm length, 10W wattage, and 1000lm lumens. It has a color temperature of 3000K, which produces a warm white light. This product is energy efficient, with an energy efficiency class of E. It is suitable for use in a variety of indoor lighting applications, such as offices, shops, and homes. The fitting can be easily installed by following the included instructions. It is important to note that the fitting should be installed by a qualified electrician.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents