2. Office
  3. Office furniture
  4. Office & computer chairs
  5. Uline
  6. H-4114 Deluxe Mesh Task Chair
H-4114 Deluxe Mesh Task Chair

Uline H-4114 Deluxe Mesh Task Chair Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Uline H-4114 Deluxe Mesh Task Chair Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What tools are required to assemble the chair?
    How do I insert the casters into the legs of the base?
    How do I correctly align and attach the armrests?
    How do I assemble the back support to the mechanism?
    How do I correctly install the seat assembly onto the gas lift?
    How can I adjust the seat height?
    How do I lock the chair in an upright position?
    How do I adjust the tilt tension?
    How do I adjust the height of the armrests?
Home » ULINE » ULINE H-4114 Deluxe Mesh Task Chair Installation Guide
Contents
1 ULINE H-4114 Deluxe Mesh Task
Chair
2 PARTS
3 ASSEMBLY
4 CHAIR ADJUSTMENTS
5 Documents / Resources
6 Related Posts
ULINE H-4114 Deluxe Mesh Task Chair
ULINE H-4114 Deluxe Mesh Task Chair Installation Guide
Manuals+ — User Manuals Simplified.
TOOL NEEDED
Allen Wrench (included)
PARTS
Hardware Kit
ASSEMBLY
1. Insert casters into the legs of the five-star base. Turn the base upright. Insert gas lift into the center of the base.
(See Figure 1)
2. Align the armrest with holes on the bottom of the seat cushion. Use one 1/4 x 1⁄” screw (8) and two 1/4 x 1⁄”
screws (11) to attach. Repeat on the opposite side. (See Figure 2)
NOTE: Use an Allen wrench to tighten all screws
3. Align mechanism with holes on the bottom of the seat cushion with tension knob facing the front of the seat.
Use four 5/16 x 1″ screws (9) to attach. (See Figure 3)
4. Position back support in the slot between the bottom of the seat cushion and the mechanism. Align holes and
use three 5/16 x 3/4″ screws (10) to attach back support to the mechanism. (See Figure 4)
5. Slowly lower the chair assembly onto the gas lift. Press down on the seat cushion to secure it in place. (See
Figure 5)
CHAIR ADJUSTMENTS
1. Seat Height Adjustment – To raise seat height, lift lever up with little to no weight on the seat. To lower seat
height, lift lever up while sitting.
2. Upright Tilt Lock – To lock chair in an upright position, push the lever in toward the center of the seat. To restore
tilt, pull lever out. Chair has synchro-tilt; the back tilts at a two-to-one ratio to the seat angle.
3. Tilt Tension – To increase tilt tension, turn knob clockwise. To decrease tilt tension, turn knob counterclockwise.
4. Armrest Height Adjustment – To adjust arm height, press the button on the side of each armrest and move the
armrest up or down
1-800-295-5510
uline.com
Documents / Resources
ULINE H-4114 Deluxe Mesh Task Chair [pdf] Installation Guide
H-4114, Deluxe Mesh Task Chair
Manuals+,
/