2. Home
  3. Domestic appliances
  4. Large home appliances
  5. Cookers
  6. Smeg
  7. SAI4954D

Smeg SAI4954D User manual

  • Hello! I've reviewed the product details for the Smeg SAI4954D induction cooktop. The document describes its touch controls, boost functionality, timer, various cooking modes, and safety features. I'm ready to answer any questions you have regarding this cooktop.
  • What is the purpose of the boost function?
    How does the timer function work?
    What does the residual heat indicator show?
ID210909
COOKTOPS
smeg.com.au
SAI4954D
90CM INDUCTION COOKTOP
Dimensions 900mmw x 53mmH x 510mmD
Finish Black ceramic
Installation Topmount
Cutout 840mmW x 478-482mmD
Capacity 5 zones
Front left: 218 x 180 mm, 2100W - boost 2500W -
double boost 3000W
Rear left: 218 x 180 mm, 2100W - boost 2500W -
double boost 3000W
Centre: Ø 250mm, 2300W - boost 3000W
Rear right: Ø 210mm, 2300W - boost 3000W
Front right: Ø 160mm, 1400W - boost 2100W
Multizone left: 360 x 218 mm, 1500W - boost 1850W
Functions Rapid heating
Grill function
Keep warm function
Pause function
Cleaning function
Auto-Vent 2.0 function
Timer End of cooking acoustic alarm
Independent timer
Ignition Automatic electronic
Controls Slider control
Safety Pan detection
Automatic cut-off
3 stage residual heat indicator
Control lock
Child safety
Power 220 - 240V, 50/60Hz
32Amp Connection
Pan size Automatic pan size recognition
Warranty Two years parts and labour
EAN 8017709302559
For precise cooking control, the zones are operated by an ergonomic
slide control where you can choose to touch directly or finger swipe up
and down the 1 to 9 power levels with no ‘tapping’ required.
TOUCH CONTROLS
Boost provides an additional surge of power for even more intense heat
and is ideal for heating large quantities of water rapidly.
BOOST FUNCTION
The timer fucnction can be used as an independent minute minder or as
a switch off timer for all zones each zone to ensure economical power
usage. Timer can be set between 1 minute - 99 minutes.
TIMER FUNCTION
If the induction cooktop surface is still hot a [H] is indicated on the control
panel. Once the temperature falls to a safe level the indicator will go out
and the cooktop can be easily cleaned.
RESIDUAL HEAT INDICATOR
ID210909
COOKTOPS
smeg.com.au
SAI4954D
90CM INDUCTION COOKTOP
PLEASE NOTE: drawings are not to scale. They are to assist only.
WARNING: technical specifications and product sizes can be varied by the manufacturer without notice.
Cutouts for appliances should only be by physical product measurements. The above information is indicative only.
53
/