Ergonomisches
Produkt
www.igr-ev.de
SECUBASE 383
Long, flexible blade
for particularly large cutting depths
Automatic blade retraction
for a high degree of safety
Stable metal rail
for highest abrasion resistance
Transport lock and
optional locking
to fix the blade in 7 levels
Ergonomic handle
for a better hold
Blade change button
for a safe and easy blade
change
Please note: To ensure your product always functions
flawlessly, regularly remove any impurities. For addi-
tional safety, we recommend wearing gloves.
For safe storage, lock the slider in position 0.
Also move the safety lock upwards in the
direction of the arrow.
You also have the option of moving the slider
forwards to the required cutting depth and
locking it in position. Then press the safety
lock into the required recess. To unlock, move
in the opposite direction.
Pierce and remove thumb from slider. The
blade retracts when cutting is complete.
Always cut away from the body.
Move the slider foward to the required blade
extension.
USAGE
At last, slide the inner part with the blade
back into the handle and flip the end of the
handle upwards. Release and snap back the
blade to ensure flawless functionality.
Lift the slider, take out and change the blade,
then position the new blade exactly on the
cam. For left hand use, turn blade over. The
two magnets fix the blade additionally.
Pull the blade change button to the back as
marked by the arrow (a), flip the end of the
handle downwards (b) and move the blade
out of the handle by using the slider.
Only possible when unlocked. That means:
Don’t push the safety device upwards.
BLADE CHANGE
Your USED BLADE CONTAINER is the best
place to store used blades.
Following cutting, the blade immediately re-
tracts into the handle. CAUTION: This requires
that your hand is not blocking the slider and
the slider is not locked.
PROTECTION OF USER DISPOSAL
08.2022 - Printed in Germany - Subject to technical changes.
* Please pay attention to the safety instructions listed in our instruction manual!
MARTOR KG | Lindgesfeld 28 | 42653 Solingen | Germany | T +49 212 73870-0 | info@martor.de | www.martor.com
SAFETY POSTER
INSTRUCTIONS FOR THE SAFE HANDLING OF YOUR CUTTING TOOL