Play/Pause Tap twice (R/L)
Next track Press and hold for 2 seconds (R)
Previous track Press and hold for 2 seconds (L)
Switch EQ in sequence:
Soundcore Signature (Default) /
Bass Booster / Podcast
Tap three times (R)
Quickly tap the touchpad on the right earbud three times to cycle through Soundcore Signature (default), Bass
Booster, and Podcast modes. You will hear a tone for each successful switch.
Soundcore Signature: Default EQ mode with well-balanced sound.
Bass Booster: Enhances low-frequency sound.
Podcast: Focus on mid-frequency for clearer voices.
Answer a call Tap twice (R/L)
End/Reject a call Press and hold for 2 seconds
(R/L)
Activate Siri or other voice assistant
software Tap three times (L)
Mono Mode
Play/Pause Tap twice
Next track Press and hold for 2 seconds
Answer a call Tap twice
End/Reject a call Press and hold for 2 seconds
Activate Siri or other voice assistant
software Tap three times
Reset
You might need to reset the earbuds if you experience any connectivity problems or function issues.
1. Place the earbuds in the charging case and make sure they are being charged.
2. Press and hold the button on the case for 10 seconds until the 3 LED indicators flash white 3 times and then
flash white in sequence continuously. This confirms that the reset was successful and your earbuds can be
connected normally.
