Nathan Light Operating instructions

Hello! I've reviewed the NATHAN LightSpur user manual. I understand how to operate the device, including turning it on/off, changing modes, and replacing the battery. I am ready to answer any questions you might have about the LightSpur.
How do I turn the LightSpur on?

How do I turn the LightSpur off?

How to cycle through light modes?

What type of battery does the LightSpur use?

Which side of the battery should be facing up?

USAGE INSTRUCTIONS

>> Pressandholdpowerbuonfor2-3secondstoturnon.

>> Pressrepeatedlytocyclethroughmodes.

>> Pressandholdpowerbuonfor2-3secondstoturno.

TO REPLACE BATTERY:

 Usingasmallphillipsscrewdriver,remove4screwsononesideoftheLightSpur.

 Removethepanelexposingthebaery.

 ReplaceCR2032baery,posive(+)sidefaceup.

 Putpanelbackandre-screwintoplace.

 RepeattheprocessfortheothersideoftheLightSpur.

LightSpur