Pyle PFSHCMR1 User manual

Brand: Pyle

Model: PFSHCMR1

Type: User manual

User Manual

Functions

Congratulations on your purchase of a Fishing Partner FDV031. We would like to express our

sincere gratitude for your trust on our products. In order to optimize the performance of the

product and prolong its life time, we strongly recommend you carefully read this user manual

before use. This user's manual has referred to the latest information during compiling.This user

manual has included some screen displays and figures to provide detailed descriptions for the

product in a more specific and direct manner.These displays and figures may slightly differ from

the product you actually use due to different technology innovations and production batches.

Please always use your product base on its actual functions.Provided with two IR LEDs, the

camera is featured by an excellent light compensation capability so that you can capture dynamic

movements of fish stocks in a very dark environment. The fishing line is made of a type of special

soft material, available in a length of 15M. The permissible tension of the line can be up to 10kg.

First insert the plug of the camera firmly into the main unit, and turn on the power switch, then

the images transferred from the camera will be shown on the LCD monitor.

The underwater camera and 3.5-inch monitor are provided as a complete package, and designed

to monitor movements of fish stocks under the water. It is an ideal choice for fishing lovers as

you can easily determine the location of fish stocks and biting state through the images

transferred from the camera to the monitor.

Video camera

Notes

Please carefully read these precautions before using the product, in order to operate it in a proper

and safety manner, optimize its performance and prolong its life time.

 Take good care of the product all the times. Prevent water or sand particles from enteringinto

the product while using it on the beach or waterside. That is because the water, sand particles,

dusts or salt components may cause damages to the product.

 Keep the product free of dusts and chemical materials. Always store it in a cool, dry and

well-ventilated place.Never expose the product under high-temperature/humidity or dusty

conditions which may cause malfunctions of the product.

 Turn off the product when it is not used for a long time.

 First insert the plug of the camera firmly into the main unit, and turn on the power switch,

then the images transferred from the camera will be shown on the LCD monitor.

 Make sure to fully charge the battery for 8 hours before first use. Don’t disassemble the

monitor (main unit) during consequent uses.

Appearance

and

Keypad

1.Camera Neck

2.Camera Housing

3.Central Ring

4.IR LED

5.Lens

6.Light-sensitive diode

1.Snap button

2.Record button

3.Playback

4.M(Menu)

5.+

6._

7.wrist strap

8.TF card slot

9.Port for Lens

10.Indicator Light

for charging(Red)

11.Sun-shield lid

12.TFT LCD

13.Power switch

14.USB Port

15.Reset

Usage

Configured with three IR LEDs, the camera is featured by an excellent light compensation

capability so that you can capture dynamic movements of fish stocks in a very dark environment.

The fishing line is made of a type of special soft material, available in a length of 15m, 20m or

any other customized length upon requirements. The permissible tension of the line can be up to

10kg.

1. Recharging for battery

Accessories USB cable to the computer USB port and host (pictured above),Connect the camera

with computer for charging in the shutdown state. The red indicator light for charging is on at this

time and will be off after charging. In general, it can be fully charged after 8-9 hours.

2. Turn on the device

To turn on the device, pull the power switch from the “OFF” position to the “ON” position.The

images transferred from the camera will be visible immediately after the device is turned on

(assuming the camera has been connected properly before turning on the device).

3. Set the display:

3.1 Set the language:

Press the "M” key once after turning on the device to call up the menu on the LCD monitor (see

the figure below). Now press the “[+]” or “[-]” key to select a desired language.

Language 0

Language 1

3.2 Set the brightness:

Press the "M” key twice after turning on the device to call up the menu on the LCD monitor (see

the figure below). Now press the “[+]” or “[-]” key to adjust the brightness of the LCD monitor.

The adjustment range is from 0 to 12. The LCD monitor will be set to a higher brightness if a

higher value is selected.

Brightness 6

3.3 Set the contrast:

Press the "M” key three times after turning on the device to call up the menu on the LCD monitor

(see the figure below). Now press the “[+]” or “[-]” key to adjust the contrast of the LCD monitor.

The adjustment range is from 10 to 12. The LCD monitor will be set to a higher contrast if a

higher value is selected.

Contrast 6

3.4 Set the color:

Press the "M” key four times after turning on the device to call up the menu on the LCD monitor

(see the figure below). Now press the “[+]” or “[-]” key to adjust the saturation of the LCD

monitor. The adjustment range is from 0 to 12. The LCD monitor will be set to a higher

saturation if a higher value is selected

Color 6

3.5 Reset:

Press the "M” key five times after turning on the device to call up the menu on the LCD monitor

(see the figure below). Now press the “[+]” key to confirm to restore the factory default

parameters. The LCD monitor will then be reset to the factory default parameters.

Reset

4.1 camera:

Connect the camera to the host, and then turn on it, the camera at the target scene time

you press the record button to start recording To stop recording, press the video button. To

do zoom operation, press the + or - key.

Note: photos loaded into the storage card is required prior to (the machine can be used

4GB to 32GB TF card). Otherwise, press the shutter button will display "NO CARD".

4.2 photos:

Connect the camera to the host, and then turn on the it, so that the camera is aligned

with the target scene after time you press the camera button to take a photograph.

To do zoom operation, press the + or - key to do the zoom operation, press the + or - key.

4.3 Playback:

Turn on the host, according to a playback button to enter the playback mode, and will

see after once again the photographs or video file, press the + or - button to select another

picture or video.

Play the video in the playback mode, select the video file, and then press the playback

button to start playing this section of video, if you want to stop playing, press the playback

button.

4.4 mode switching:

In other modes you want to switch to video mode, click the video button to switch to take

photos or playback mode operation empathy.

5.connected to the computer:

The host can be directly connected via USB cable to the PC as a high-capacity removable

disk connected to your computer through the Windows file manager to browse in the TF

card photos or video file.When you unplug the USB cable ,the camera will automatically

turn off .finally, the power switch dial to OFF.

Tip:

1 Windows 2000 or later operating system can avoid driver.

2 photo file exists in the directory of TF card I: \ DCIM \ 100MEDIA. (Assuming I is the

removable disk drive letter).

Technical Data – Camera:

Overall dimensions 30mmx17.8mm (L x DN)

Weight Approx. 10g

Power supply Power supplied by the main unit: 3.7V lithium battery

Sensor 1/4 inch (0.3Mega pixels) sensor wafer

Resolution 720x480 Pixels

Horizontal angle ≥130°

Working temperature -10℃～40℃

Working depth 15M below the water surface

Length of line 15M

Tension 10KG-40KG

Diameter of line 1.0mm-1.9MM

Technical Data – Monitor:

Overall dimensions: 103mmx72mmx17mm(W x H x T)

Display 3.5-inch LCD

Resolution 320x240

Backlight brightness 300cd\㎡

Power supply Rechargeable lithium battery 3000mA/H

Voltage 3.7V

Power consumption 2.5W

Battery capacity (for

continuous use)

7 - 8 hours ((fully charged)

Weight 200g

Working temperature -10℃～40℃

Special precautions before use:

Make sure to fully charge the battery for 8 hours before first use, and insert the plug of the camera

firmly into the main unit, and then turn on the power switch.

Packing list (standard):

1 User Manual 1PCS 5 Floating Ball 1PCS

2 Camera (with cable) 1PCS 6 Central Ring 2PCS

3 Monitor (main unit) 1PCS 7 Charger 1PCS

4 Monitor bracket 1PCS 8 USB Cable 1PCS

Shop for quality Pyle products on our website.

Pyle PFSHCMR1 User manual

Pyle PFSHCMR1 User manual

Related papers

Other documents